XIAOMI BE3600

Contents

Xiaomi Router BE3600 WiFi 7 User Manual

Model: BE3600 | Brand: XIAOMI

1. Introduction

The Xiaomi Router BE3600 WiFi 7 is a high-performance dual-band wireless router designed for home use, offering advanced networking capabilities. It features a Qualcomm quad-core processor, supports the latest WiFi 7 (802.11be) standard, and delivers a wireless transmission rate of up to 3570Mbps. Key features include MLO dual-frequency aggregation, OFDMA enhanced version, 4K QAM technology for increased data density, and a 2.5G high-speed network port. It also supports Mesh networking for extended coverage and multi-platform game acceleration.

Xiaomi Router BE3600 2.5G, WiFi 7, speed beyond imagination
Figure 1.1: Xiaomi Router BE3600 2.5G, highlighting WiFi 7 capabilities.
Key features of WiFi 7 router
Figure 1.2: Overview of key WiFi 7 features including 3600Mbps wireless rate, Qualcomm 4-core chip, MLO dual-frequency aggregation, OFDMA, 2.5G port, and independent signal amplifiers.

2. Package Contents

Please check the package contents upon unboxing to ensure all items are present:

Packing list for Xiaomi Router BE3600
Figure 2.1: Diagram of the Xiaomi Router BE3600 2.5G Version packing list.
  • Xiaomi Router BE3600 2.5G Version
  • Specification Document (User Manual)
  • Net Cable
  • Power Adapter

3. Product Overview

Familiarize yourself with the router's ports and buttons:

Xiaomi Router BE3600 front and rear view with port labels
Figure 3.1: Front and rear views of the Xiaomi Router BE3600 2.5G Version, indicating port locations.
Table 3.1: Router Ports and Buttons Description
Serial Number Name Use
1 Power port For connecting the power adapter
2 RESET button Restore router factory Settings
3 1G network port A network port with a maximum rate of 1Gbps, which can be used as a WAN or LAN port (automatic identification)
4 2.5G network port A network port with a maximum rate of 2.5Gbps, available as a WAN port or LAN port (automatic identification)
5 MESH button Networking with a router that supports Xiaomi Mesh functionality

4. Indicator Light Status

The indicator light on the router provides information about its current status:

Table 4.1: Indicator Light Status Description
Status Description
Extinguish Unconnected power
Steady orange The system is starting up or the network is abnormal
Orange Breathing Boot complete, system to be configured
Blinking orange The Mesh is being connected to the main route or the system is being upgraded
Steady blue Normal operation
Blue Breath When a configurable Mi Mesh node device is found, blink for 2 minutes without networking operation, it will automatically return to steady on
Blinking blue A lower-level node is being connected

5. Setup

5.1 Initial Connection

Before configuring internet access, connect the necessary cables:

  1. Power on the router.
  2. Connect any of the router's network ports to the wall socket or the LAN port of your Optical Network Terminal (ONT) / broadband modem. The ONT/modem is typically provided by your broadband operator. If not provided, connect the incoming network cable directly to any of the LAN ports on the back of the router.
Diagram for connecting power and network cables to the router
Figure 5.1: Connecting the power adapter and network cable to the router.

5.2 Internet Access Configuration

Follow these steps to set up your internet connection:

  1. Connect your mobile phone or computer to the router's Wi-Fi network. The default Wi-Fi name (no password required) is usually found on a label at the bottom of the router.
  2. Wait until the router's indicator light turns orange and starts to breathe, then search for and connect to its Wi-Fi.
  3. Open a web browser. The page should automatically jump to the internet access guide page. If it doesn't, manually enter miwifi.com in your browser's address bar.
  4. Enter the account and password provided by your broadband operator and click 'Next'. (This step may be skipped depending on your internet access method.)
  5. Set a new Wi-Fi password and a management password. You can choose to use the same password for both.
Wi-Fi setup process showing WLAN enabling and Mi Router welcome screen
Figure 5.2: Initial Wi-Fi setup steps.
Internet guide and network created successfully screen
Figure 5.3: Broadband account entry and successful network creation.

Note: If the Wi-Fi configuration has been modified, the Wi-Fi module will restart after this step. There may be a brief period when Wi-Fi cannot be detected. Please try searching for Wi-Fi again later.

5.3 IPv6 Setting

To configure IPv6 settings:

  1. Open a browser, enter miwifi.com, and input the password to access the router management page.
  2. Click on "Common Settings" > "Internet Settings", and follow the page instructions to modify the IPv6 function and IPv6 firewall configuration. The IPv6 function of this product is enabled by default.

6. Operating Instructions

6.1 Mi Home APP Management

For a better management experience, it is recommended to use the Mi Home APP:

  1. Connect your mobile phone to the router's Wi-Fi.
  2. Open the Mi Home app and log in with your Xiaomi account.
  3. Scan the QR code below with your mobile phone or search for and download the Mi Home APP in your app store.
  4. Follow the prompt box that pops up automatically to complete the binding.
QR code for Mi Home APP
Figure 6.1: QR code to download the Mi Home APP.

6.2 Xiaomi Mesh Networking

To extend your network coverage, you can set up a Mesh network with multiple Xiaomi routers that support this function. Product models and versions supporting Mesh are subject to the official Xiaomi Mall website.

Mesh networking diagram for home coverage
Figure 6.2: Mesh networking providing seamless coverage throughout a home.

Method 1: Networking via Mi Home APP (using Xiaomi Router BE3600 2.5G as main router)

  1. Open the Mi Home APP.
  2. Enter the "Mesh Network Devices" page of the main router.
  3. Click on [Add Node].
  4. Complete the network setup according to the prompts provided.

Method 2: MeshKey Networking

  1. Place the sub-router near the main router and connect it to power. Ensure the distance between the main router and sub-router is greater than 1 meter to avoid interference.
  2. After the sub-router is fully started, the main router will automatically detect it, and its indicator light will start to breathe in blue.
  3. If the sub-router has been previously configured, press and hold the RESET button for 5 seconds to restore it to factory settings first.
  4. Briefly press the MESH button on the main router. The main router's indicator light will start to flash blue, indicating the networking process has begun.
  5. Wait for the sub-router's indicator light (for single-light products) or the Internet indicator light (for dual-light products) to turn solid white or blue, indicating successful setup.
  6. Once configured, place the sub-router at the desired location for Wi-Fi coverage and power it on.
MeshKey networking diagram with main and sub-router
Figure 6.3: MeshKey networking setup showing WAN port or free mouth connection.

Wired Mesh Backhaul

For wired mesh backhaul, follow these steps:

  1. Place the sub-router at the location where Wi-Fi coverage is needed and plug it in.
  2. Connect the WAN port of the sub-router (or any port if there is no WAN port) to a LAN port of the main router (or any port if there is no LAN port) with an Ethernet cable. The indicator light of the main router will start to flash blue, and the networking process will begin.
  3. If the sub-router has been previously configured, press and hold the RESET button for 5 seconds to restore it to factory settings first.
  4. Wait for the indicator light of the sub-router (for single-light products) or the Internet light (for dual-light products) to turn white or blue and stay on constantly, which indicates that the networking is successful.
Wired Mesh networking diagram with primary and secondary routers
Figure 6.4: Wired Mesh networking setup with primary and secondary routers.

7. Maintenance

  • Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features.
  • Regular Reboots: Periodically reboot your router (e.g., once a month) to clear its memory and resolve minor performance issues.
  • Physical Cleaning: Keep the router free from dust and obstructions to ensure proper ventilation and prevent overheating.
  • Secure Passwords: Use strong, unique passwords for your Wi-Fi network and router management interface.

8. Troubleshooting

8.1 Common Questions & Answers

Q: Why can't I get online even though I have completed the Internet settings?
  1. Confirm whether you can search for the router's Wi-Fi network with your mobile phone. If not, ensure the router is powered on and has completed its startup.
  2. Use your mobile phone to find and connect to the router.
  3. Visit miwifi.com.
  4. Try to fix it according to the network diagnosis results.
Q: How can I restore the router to its factory settings?
  1. Make sure the router has completed its startup.
  2. Press and hold the RESET button on the router for more than 5 seconds. Release the RESET key when the indicator light turns orange.
  3. After the router restarts successfully, the reset operation is completed. Note: After resetting, the router will revert to factory settings and you will need to reconfigure it.
Q: What should I do if I forget the router's administrative password?

If no special settings were made, the management password will be the same as the Wi-Fi password. Try logging in with your Wi-Fi password. If the problem persists, it is recommended to restore the router to factory settings and set up the internet connection again.

8.2 Router Performance Failure Table

Table 8.1: Common Performance Glitches and Solutions
Issue Performance Glitches
Wireless router
  • After the product is started, the indicator shows orange steady on for more than two minutes without breathing.
  • After the product is powered on, it cannot be started or the indicator light is not bright.
  • Function keys of the product do not work properly.
  • The Internet cannot be set after the product is started.
  • The product cannot connect to Wi-Fi after startup.

9. Specifications

Table 9.1: Xiaomi Router BE3600 Specifications
Attribute Value
Brand Name XIAOMI
Product Model BE3600 (RD15)
Wireless Transmission Rate 3600M (3570Mbps)
Wireless Communication Standard 802.11.be (WiFi 7), Wi-Fi 802.11g
Frequency Band Class Dual-Band (2.4 GHz)
Support Mesh Yes
With Modem Function No
Type Wired
Recommended Uses Home
Package Yes
Hign-concerned Chemical None
Origin Mainland China
Ports 1x 2.5G network port, 3x 1G network ports
Package Weight 0.619 kg
Package Dimensions (L x W x H) 23 cm x 22 cm x 5 cm

10. User Tips

  • App Setup: When using the Xiaomi Home app for setup, ensure your region is set to 'Mainland China' for proper connection and functionality.
  • Flexible WAN/LAN Ports: The router intelligently detects the internet source, allowing you to connect the modem cable to any of the available network ports.
  • Wired Mesh Backhaul: For optimal performance in a Mesh network, utilize wired connections between routers where possible.
  • Latency Improvement: Users have reported significant improvements in internet latency and signal strength across devices.
  • Community Resources: For advanced troubleshooting or custom firmware discussions, community forums like 4pda may offer additional insights.

11. Warranty and Support

For product support, warranty information, or service inquiries, please contact the manufacturer:

  • Manufacturer: Beijing Xiaomi Electronics Product Co., Ltd.
  • Address: Room 802, 8th Floor, Building 5, No. 15, Chuangke 10th Street, Beijing Economic-Technological Development Area, Beijing
  • Service Hotline: 400-100-5678
  • Service Website: www.mi.com/service

A detailed user manual in PDF format is also available for download: Xiaomi Router BE3600 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.