VILCORN M8-JOY

Contents

VILCORN Arcade Video Game Console M8-JOY User Manual

Model: M8-JOY

1. Introduction

Thank you for purchasing the VILCORN M8-JOY Arcade Video Game Console. This device transforms your TV into a retro gaming hub, offering thousands of classic games across various emulators. Please read this manual carefully to ensure proper setup, operation, and maintenance of your console.

Package Contents

  • 1 x Game Stick (M8-JOY Console)
  • 1 x USB Power Cable
  • 1 x HD Extension Cable
  • 1 x Gamepad Receiver
  • 2 x Gamepads
  • 1 x User Manual

Package Contents of VILCORN M8-JOY Console
Figure 1: Package Contents including Game Stick, cables, receiver, and two gamepads.

2. Setup Guide

Console Overview

Familiarize yourself with the ports and buttons on your Game Stick:

  • HDMI Interface: For connecting to your TV or display.
  • Upgrade Button: Used for firmware updates (typically not user-accessible).
  • TF Card Slot: For the pre-loaded game card (supports up to 128GB expansion).
  • Micro USB Port: For power input (5V/1A).
  • USB Port: For connecting the gamepad receiver.

Connecting to a TV or Monitor

  1. Insert the Game Stick directly into an available HDMI port on your TV or monitor. If space is limited, use the provided HD Extension Cable.
  2. Connect the USB Power Cable to the Micro USB port on the Game Stick. Plug the other end of the USB Power Cable into a 5V/1A USB power adapter (not included) or a USB port on your TV that provides sufficient power.
  3. Insert the Gamepad Receiver into the USB port on the Game Stick.
  4. Turn on your TV/monitor and select the corresponding HDMI input channel.
  5. The blue indicator light on the Game Stick will illuminate when power is connected.

Connecting VILCORN M8-JOY to TV
Figure 2: Game Stick connected to a TV for HD output.

Connecting to a Computer or Projector

The console supports TV Mode, Projector Mode, and Computer Mode. For Computer Mode, you will need a video capture device and OBS software.

  1. Connect the USB Power Cable to the Micro USB port at the bottom of the Game Stick.
  2. Insert the Game Stick's HDMI output into the HDMI input of your video capture device.
  3. Connect the video capture device to your computer via its USB output.
  4. Connect the Gamepad Receiver to the USB port on the Game Stick.
  5. Use OBS software (or similar) on your computer to display the video feed from the capture device.

VILCORN M8-JOY suitable for multiple devices
Figure 3: Console compatibility with TV, Projector, and Computer modes.

Video 1: Product demonstration including how to connect to a computer (0:43 - 0:55).

Controller Setup

  1. Each gamepad requires batteries (not included). Open the battery compartment on the back of each gamepad and insert the required batteries (typically AAA).
  2. Ensure the Gamepad Receiver is plugged into the Game Stick's USB port.
  3. Turn on the gamepads. They should automatically connect to the console via the receiver.

3. Operating Instructions

Main Menu Navigation

Once powered on, the console will display the main menu:

  • List: Displays all games available on the TF card. Use the direction keys to navigate up/down and left/right to turn pages. The current emulator for each game will be indicated on the screen.
  • History: Shows a list of recently played games.
  • Collection: Allows you to add your favorite games for quick access.
  • Search: Filter games by name. The search function is case-insensitive.
  • Settings: Access console settings such as language, key tones, local file search, restore default settings, system information, and exit settings.

Playing Games

  1. From the main menu, use the direction keys on your gamepad to select a game.
  2. Press the START or A button to launch the selected game.
  3. To return to the main menu from a game list, press the B button.

In-Game Menu and Functions

While in a game, you can access the in-game menu by holding down the SELECT and START buttons simultaneously on your gamepad.


Video 2: Accessing the in-game menu and saving a game (0:36 - 0:42).

The in-game menu provides the following options:

  • Resume: Return to the game.
  • Exit: Quit the current game and return to the main menu.
  • Save State: Save your current game progress. Select an empty slot and press A to confirm.
  • Load State: Load a previously saved game progress. Select a saved slot and press A to confirm.
  • Screen Setting: Adjust display options.
  • Controls: Potentially allows for button remapping (refer to on-screen instructions if available).

4. Maintenance

  • Keep the Game Stick, gamepads, and all accessories clean and dry. Use a soft, dry cloth for cleaning.
  • Avoid exposing the console to extreme temperatures, direct sunlight, or high humidity.
  • Handle the Game Stick and gamepads with care to prevent physical damage.
  • When gamepad batteries are low, replace them with fresh ones to ensure optimal performance.
  • Do not attempt to disassemble or modify the console, as this will void the warranty and may cause damage.

5. Troubleshooting

No Signal on TV/Monitor

  • Ensure the Game Stick is securely plugged into the HDMI port.
  • Verify that the USB Power Cable is properly connected to the Game Stick and a working 5V/1A power source.
  • Check that your TV/monitor is set to the correct HDMI input channel.
  • Try connecting the Game Stick to a different HDMI port or a different TV/monitor to rule out display issues.

Gamepads Not Responding

  • Check if the gamepads have fresh batteries and are turned on.
  • Ensure the Gamepad Receiver is firmly inserted into the USB port of the Game Stick.
  • If the gamepads do not connect automatically, try restarting the console.

Game Performance Issues (Lag, Input Delay)

  • Ensure the console is receiving stable power from a 5V/1A adapter.
  • Some older games or emulators might have slight variations in performance.
  • If experiencing significant lag, try restarting the console and the game.

Cannot Configure Buttons

  • Access the in-game menu (SELECT + START) and navigate to the 'Controls' option. Follow any on-screen instructions for remapping buttons if the feature is available.
  • Note that not all emulators or games may support custom button configurations.

6. Specifications

BrandVILCORN
ModelM8-JOY
CategoryVideo Game Console
Games Included20,000 (64GB TF Card) / 41,000 (128GB TF Card)
Supported LanguagesJapanese, Spanish, English, Brazilian Portuguese, Simplified Chinese (and 23 others)
Supported EmulatorsCPS, FC, GBC, GBA, MD, SFC, PS1, Atari, MAME, GB
Video Output4K HDMI
Power Input5V/1A (Micro USB)
TF Card SupportMax 128GB
WeightApprox. 1.2 kg
Package Dimensions32cm (L) x 19cm (W) x 12cm (H)
Battery IncludedNo (for gamepads)
Removable/Replaceable BatteryYes (for gamepads)
Bluetooth-compatibleNo
Wi-FiNo

VILCORN M8-JOY supporting 9 emulators
Figure 4: Console supports 9 different emulators.

7. User Tips

  • System Integrity: To prevent system corruption, avoid deleting files directly from the console's storage unless you are certain of their function.
  • Controller Connection: Ensure your gamepads have fresh batteries and the gamepad receiver is securely plugged into the Game Stick for automatic connection.
  • Game Downloads: If adding new games, ensure they are in the format supported by the console's emulators and placed in the corresponding folders on the TF card.

8. Warranty and Support

Warranty Information

  • The product is covered by a one (1) year warranty from the date of sale.
  • Lifelong maintenance services are provided; however, accessories are not covered under warranty.
  • The warranty is valid only under normal use. Any artificial damage, including self-disassembly, improper use, or physical damage, will void the warranty.
  • A valid warranty card (if provided) or proof of purchase is required for warranty services.

Safety Warning

WARNING: CHOKING HAZARD

All packaging materials (such as adhesive tape, plastic bags, plastic film, binding wires, labels) and small accessories inside the machine should not be exposed to children under 3 years of age to avoid suffocation hazards. This product should be used under adult supervision.

Customer Support

For any questions, technical support, or warranty claims, please contact your retailer or the manufacturer's customer service. (Contact details not provided in product data).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.