Product Overview
The KEMIMOTO 2ft UTV ATV Spiral LED Whip Lights are designed to enhance visibility and aesthetics for off-road vehicles. Featuring 360° spiral luminescence with vibrant LED lights, these whips offer a wide range of lighting modes and are built for durability in challenging environments. They are controlled via an RF remote and are compatible with various UTV and ATV models.
Video: KEMIMOTO LED Whip Lights in action on a UTV.
Package Contents
Please ensure all items are present before installation:
Image: Components of the KEMIMOTO LED whip light kit, including the whip lights, quick release bases, waterproof connectors, RF remote, and American flags.
- 2x KEMIMOTO 2ft Spiral LED Whip Lights
- 2x Quick Release Bases
- 1x RF Remote Control
- 2x American Flags
- Mounting Hardware (adjustable clamps, M12 bolts, washers, nuts)
- Wiring Harness with 12V DC power adapter
- Instruction Manual (PDF available online)
Setup and Installation
Follow these steps to properly install your KEMIMOTO LED Whip Lights:
- Choose Mounting Location: Select a suitable location on your UTV/ATV that has a flagpole bracket. The aluminum base has a 12mm diameter, designed to fit most whip mounts.
- Install Quick Release Base: Secure the quick-release base to your vehicle's mount using the provided M12 bolts and other mounting hardware. Ensure it is firmly attached to prevent movement during operation.
- Attach Whip Light: Insert the KEMIMOTO LED Whip Light into the quick-release base. The quick-release mechanism allows for easy attachment and removal.
- Connect Wiring: Connect the whip light's wiring to the provided wiring harness. Ensure all connections are secure and waterproof. The wiring harness includes a 12V DC power adapter. The lamp cable length is 20cm, control box input cable length is 60cm, and output cable length is 1 meter.
Image: Wiring diagram for KEMIMOTO LED whip lights, showing connections to the 12V DC power source.
- Mount Flags (Optional): If using the American flags, attach them to the whip lights using the adjustable mounting clamps. These clamps are designed to prevent the flag from tangling around the whip.
- Secure Cables: Route and secure all cables away from moving parts and heat sources using cable ties or clips to prevent damage.
Image: Adjustable flag mounting clamps to prevent tangling, ensuring the flag waves freely.
Image: Close-up of the quick release base and waterproof wiring connections.
Operating Instructions
Your KEMIMOTO LED Whip Lights can be controlled using the provided RF remote control.
Image: Diagram of the wireless remote control functions, showing buttons for automatic mode, brightness/speed/modes adjustment, and static color modes.
Remote Control Functions:
- On/Off: Power the whip lights on or off.
- AUTO: Activates automatic mode, cycling through various lighting patterns.
- S+/S-: Adjusts the speed of dynamic lighting modes.
- M+/M-: Cycles through different lighting modes (366+ modes available).
- Brightness Adjustment: Adjusts the brightness level (7 levels for Clear, 5 for Black, 100 levels with APP).
- Static Color Modes: Select from 12 solid colors directly using the color buttons.
Remote Matching:
- Cancel Matching: Press any color button for 5 seconds to cancel the current remote matching. All remote controls can then control the lights.
- One-to-One Matching: Press any color button for 5 seconds to establish a one-to-one matching between that remote and the lights.
Image: Whip lights demonstrating turn signal (left/right), reverse light, and braking light functions.
Maintenance
- Cleaning: Regularly clean the whip lights with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners or solvents.
- Dust Cap: When the whip lights are removed, use the provided dust caps on the quick-release bases to prevent mud or sand from accumulating.
- Connection Check: Periodically inspect all wiring connections for tightness and signs of wear or corrosion. Ensure waterproof connectors are properly sealed.
- Storage: If storing the vehicle for an extended period, consider removing the whip lights and storing them in a dry, protected area.
Image: IP67 Waterproof rating shown with water splashing on the whip light, indicating resistance to water and dust.
Troubleshooting
- Lights Not Turning On:
- Check all power connections to ensure they are secure and receiving 12V DC.
- Verify the remote control battery is functional.
- Try re-matching the remote control as described in the Operating Instructions.
- Inconsistent Lighting or Flickering:
- Inspect wiring for any loose connections or damage.
- Ensure the power source is stable and providing consistent voltage.
- Remote Not Responding:
- Replace the remote control battery.
- Ensure there are no obstructions between the remote and the whip light receiver.
- Perform the remote control matching procedure.
- Fitment Issues: If the product does not fit your specific motorcycle or vehicle, please refer to the product specifications for compatible vehicle types and base diameter.
Specifications
| Feature | Detail |
|---|---|
| Model Name | B0804-034 |
| Brand Name | KEMIMOTO |
| Item Length | 23.62 inch (2ft / 60.96cm) |
| Item Width | 2 inch |
| Item Height | 3.94 inch |
| Item Weight | 1.3 kg |
| Material | EVA transparent heat-shrinkable tube and 6063 aviation aluminum Quick Release Base |
| Voltages | DC 12V |
| Waterproof Grade | IP67 |
| Remote Control Distance | 10m |
| Number of LEDs (Clear) | 180 pcs leds per whip light (2ft) |
| Number of LEDs (Black) | 72 pcs leds per whip light (2ft) |
| Lighting Modes | 366 modes with remote control; 212 modes setting with APP |
| Control By | RF Remote control |
| LED Life Span | Over 50,000 hours of durability testing |
| Speed Adjustment | 10 (with remote), 100 (with APP) |
| Brightness Adjustment | 7 (Clear), 5 (Black), 100 (with APP) |
| Operating Temperature | -30°C ~ 50°C |
| LED Chips Model | 5050 SMD |
| Cable Length | Lamp cable 20cm, control box input 60cm, output 1m |
| Luminous Angle | 360° spiral luminescence |
| Diameter of Base | 12mm (fits most whip mounts) |
| For ATV Brand/Model | Polaris (Compatible with Polaris RZR 800/ 900/ 1000/ xp / pro, Can-Am Maverick X3 Commander, Talon 1000, YXZ 1000, Teryx, Sportsman, Outlander, etc.) |
| Special Features | Remote Control |
Image: High performance features of KEMIMOTO LED whip lights, highlighting static and dynamic modes, brightness, and speed levels, powered by 5050 SMD chips.
User Tips
- Check Compatibility: Before purchasing or installing, verify the 12mm base diameter fits your existing whip mounts.
- Flag Management: Utilize the adjustable mounting clamps for the American flags to prevent them from tangling around the whip light, ensuring they wave freely.
- Length Options: While this manual covers the 2ft model, KEMIMOTO may offer other lengths. Check product listings for alternative sizes if a different length is desired.
- App Control: For advanced control over lighting modes, speed, and brightness (up to 100 levels), consider using the compatible mobile application if available.
Warranty and Support
KEMIMOTO products are designed for quality and durability. For detailed warranty information or technical support, please refer to the official KEMIMOTO website or contact their customer service. A comprehensive user manual in PDF format is also available for download from the product page for more in-depth instructions and diagrams.
If you encounter any issues, please document them with photos or videos and contact customer support for assistance. This will help in diagnosing and resolving any problems efficiently.
PDF User Manual: For a detailed guide, please refer to the KEMIMOTO LED Whip Lights User Manual (PDF).