Feyree 7KW 32A 1-Phase GBT Portable EV Charger User Manual

1. Important Safety Information

1.1. WARNING!

Avoid immersing the AC charging connection device in water.
Do not step on, pull, bend, or knot the charging cable.
Do not insert foreign objects into any part of the Charging vehicle connector.
Refrain from dropping the control box or placing heavy objects on its surface.
Do not install or use the charger near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
Ensure the operating ambient temperature of the equipment remains within the range of -30°C to +55°C.
Don't use the charger when you, the vehicle, or the charger is exposed to severe rain.
Do not use the charger if it is defective, appears cracked, frayed, broken, otherwise damaged, or fails to operate.
Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage.
Do not attempt to open, disassemble, repair, tamper with, or modify the charger.
This product is exclusively designed for electric vehicle charging purposes.
Avoid using external wires or adapters.
This product must be well-grounded when used.
Never insert your fingers into the charging plug.
The EV charger is not user serviceable. Contact us at tina@feyree.com for any repairs.
If the device fails to charge normally as per the operation manual, please contact the seller or consider a replacement.
Never allow children to play with the charger cable.
To avoid the risk of fire or electric shock, do not use this device with an extension cord.
Using a worn or damaged AC outlet may cause burns or start a fire.
Risk of explosion. This equipment has an arc or sparking parts that should not be exposed to flammable vapors.
Risk of electric shock. Do not remove the cover or attempt to open the enclosure of the charger unit. No user-serviceable parts inside. Refer servicing to qualified service personnel.

1.2. CAUTION! Please Note Before Start Charging

Precautions 1:

It is recommended that electrical outlets for your charger should be installed by a licensed and qualified electrician. To avoid serious injury or death; installation must comply with local codes.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to help reduce the risk of electric shock.

Precautions 2:

Ensure the power plug and socket are compatible before initiating the charging process.
Do not charge if the socket is damaged, rusty, cracked, or has a loose connection. In case the socket is dirty or wet, please disconnect the power supply first. Wipe the charging plug with a dry and clean cloth to ensure it is dry and free from any debris.
Verify that the charging connector, cable, control box, and plug surface are in good condition without any scratches, rust, breaks, or damages.

2. Product Overview

The Feyree 7KW 32A 1-Phase GBT Portable EV Charger is designed for efficient and safe electric vehicle charging. It features a robust control box with an LCD display, a 5-meter cable, and a CEE plug for connection to the power source.

Figure 2.1: Feyree 7KW EV Charger with car, showing main unit, cable, and included accessories (holder, bag).

2.1. Key Features

Power Output: 7KW
Current: 32A
Phase: 1-Phase
Connector Type: GBT (GB/T20234)
Cable Length: 5 meters
Plug Type: CEE Plug
IP Rating: IP66 (Waterproof, Dustproof, Breathable)
Operating Temperature: -30°C to +55°C
Control Box: Integrated with LCD display for real-time information and settings.

Figure 2.2: Industrial charging station features: IP66 rating, waterproof, dustproof, breathable. Shows inlet and outlet arrows.

2.2. Control Box Dimensions

The control box has the following approximate dimensions:

Length: 260 mm
Width: 113 mm
Depth: 66 mm

Figure 2.3: Detailed view of the 7KW 1-Phase 32A GB/T20234 IP66 charger with a CEE male plug, highlighting the free EV charger box holder and bag.

3. Specifications

3.1. GB/T Charger Specifications

Parameter	7kW	11kW	22kW
APP	/	/	/
Leakage protection	TypeB AC 30mA+DC 6mA
Power supply system	Single Phase	Three Phase	Three Phase
Rated voltage	85V-264V	380V±20%	380V±20%
Rated current	8-10-13-16-20-25-32A	8-10-13-16A	8-10-13-16-20-25-32A
Input Frequency	50/60Hz	50/60Hz	50/60Hz
Charger Plug	IP66	IP66	IP66
Charger Box	IP66	IP66	IP66
Working temperature	-30°C ~ +55°C	-30°C ~ +55°C	-30°C ~ +55°C
Storage Temperature	-40°C ~ +80°C	-40°C ~ +80°C	-40°C ~ +80°C
Standby power	<3W	<3W	<3W
Operation Humidity	5%~95% non-condensation	5%~95% non-condensation	5%~95% non-condensation
Cable Specification	3G 6mm²+1*0.5mm²	5G 2.5mm²+1*0.5mm²	5G 6mm²+1*0.5mm²

3.2. TYPE2 Charger Specifications (for reference)

Parameter	7kW	11kW	22kW
APP	/	/	/
Leakage protection	TypeB AC 30mA+DC 6mA
Power supply system	Single Phase	Three Phase	Three Phase
Rated voltage	85V-264V	380V±20%	380V±20%
Rated current	8-10-13-16-20-25-32A	8-10-13-16A	8-10-13-16-20-25-32A
Input Frequency	50/60Hz	50/60Hz	50/60Hz
Charger Plug	IP66	IP66	IP66
Charger Box	IP66	IP66	IP66
Working temperature	-30°C ~ +55°C	-30°C ~ +55°C	-30°C ~ +55°C
Storage Temperature	-40°C ~ +80°C	-40°C ~ +80°C	-40°C ~ +80°C
Standby power	<3W	<3W	<3W
Operation Humidity	5%~95% non-condensation	5%~95% non-condensation	5%~95% non-condensation
Cable Specification	3G 6mm²+1*0.5mm²	5G 2.5mm²+1*0.5mm²	5G 6mm²+1*0.5mm²

4. Setup and Installation

4.1. Mounting the EV Charger Box Holder

The charger comes with an EV Charger Box Holder for convenient storage and mounting. It is recommended to install this holder near your charging location.

Figure 4.1: Installation of the EV Charger Box Holder, indicating where the charger unit attaches.

4.2. Initial Connection

Ensure the power outlet (CEE socket) is properly installed by a qualified electrician and meets local electrical codes.
Verify that the power outlet is clean, dry, and free from damage.
Plug the CEE plug of the charger into the compatible power outlet.
The charger is now ready for use.

Figure 4.2: Feyree 7KW EV Charger mounted on a wall next to an electric car, with the cable neatly coiled.

5. Operating Instructions

5.1. Control Box Interface (NO APP Version)

The control box features three buttons for operation:

(A) Adjust Current: Click to decrease the charging current.
(D) Set Delay Time: Click to enter the delay time setting.
(T) Set Charging Time: Click to enter the charging duration setting. Long press for 10 seconds to enter the settings page.

Note: The device cannot adjust the current during charging.

5.2. Control Box Interface (WIFI APP Version)

For WIFI APP versions, the physical buttons function similarly, but additional controls are available via the mobile application.

(A) Adjust Current: Click to decrease the charging current.
(D) Set Delay Time: Click to enter the delay time setting.
(T) Set Charging Time: Click to enter the charging duration setting. Long press for 10 seconds to enter the settings page.

Note: The device cannot adjust the current during charging.

5.3. LCD Display Overview

The LCD display provides real-time charging status and information. The display may vary slightly based on the power output (7kW/9.6kW/12kW or 11kW/22kW) and single-phase/three-phase configurations.

Common Display Elements:

Wifi State: Connection waiting, Connect, Not connected.
Charging Status: Indicates if charging is active.
Current: Displays the set charging current (e.g., 32A, 16A).
Real-time Temperature: Current operating temperature.
Voltage: L1, L2, L3 voltages.
Real-time Power: Current power consumption (kW).
Energy Consumed: Total energy consumed (kWh).
Charging Duration / Delay Charging Countdown: D:00h (Delay hours), T:00h (Total hours).

Charge Plan: Set current, delay start, charge time.
Charge Log: View historical charging records (e.g., 01.-C3-E4-01-01-C1).
Settings: Leakage check (On/Off), Ground check (On/Off), Min-Voltage (085V), Max-Voltage (265V), Reset Wifi, Clear Data.
About Device: View device information (Type, RCD, Leakage status, CP, Sum, Times, Duration, HV, SV).

5.4. Charging Steps

Adjust Current: Tap button