1. Introduction
Thank you for choosing our product! The Baofeng UV-5RH is a versatile FM handheld transceiver that combines the latest wireless communication technology with a robust mechanical design. Whether you are a professional needing to stay in touch with your team (e.g., in pastoral areas, farms, self-driving tours, hunting, forest patrol, tactical training) or a casual user looking to connect with friends and family, this product will bring convenience to your work, life, and leisure.
To prevent personal injury or property damage due to improper operation, please read all information carefully before using this product. To ensure you get the most out of this product, please read this manual and the "Safety Information Manual" in detail before use.
2. Safety Information
2.1. User Warning
The purchase and use of this device constitute the setup and use of a radio station. In the People's Republic of China, setting up and using a radio station must comply with national and local "Radio Management Regulations" for station approval and obtaining a radio license. During use, the device must operate according to the licensed parameters. Unauthorized setup and use of radio stations, interference with radio services, non-compliance with licensed parameters, and other violations of radio management laws will result in administrative penalties by radio management authorities. Serious violations may also constitute a crime under Article 288 of the "Criminal Law" or Article 28 of the "Public Security Administration Punishment Law," punishable by imprisonment of up to three years or detention for up to fifteen days by public security organs.
2.2. Important Information
Unauthorized changes or modifications to this device may void your right to operate it. Your walkie-talkie is set to transmit modulated signals on specified frequencies. Changing or adjusting the settings within this unit beyond these limits is illegal. Any adjustments to this unit must be performed by qualified technical personnel.
Before using this walkie-talkie, please read the following RF radiation and product safety instructions for safe use.
2.3. RF Radiation Information
This product is limited to occupational use that meets RF energy radiation requirements. Users must clearly understand the hazards of RF radiation and take appropriate measures to meet RF radiation limits.
2.3.1. RF Radiation Common Sense
RF refers to electromagnetic frequencies that can radiate into space. It is a widely used technology in communications, medical, food processing, and other fields, and it generates certain RF radiation during use.
2.3.2. RF Radiation Control and Operating Instructions
To ensure optimal performance and compliance with radiation limits for occupational or controlled environments, transmission time should not exceed 50% of the rated duty cycle (maximum 50% transmission time), and the following instructions must be followed:
- RF energy radiation is generated only during transmission (speaking); it is not generated during reception (listening) or standby.
- Maintain a distance of at least 2.5 cm between the transmitting device and your body.
2.4. Prohibited Use
Do not use this product in the following places or situations to avoid property damage or personal injury:
- Do not use or charge the battery in places where fuel, chemicals, explosive gases, or other flammable and explosive materials are stored. Unless certified explosion-proof and intact, any disassembly or installation is prohibited.
- Do not use this product in or near blasting areas.
- Do not use this product near medical equipment or electronic devices sensitive to RF signals.
- Do not hold this product while driving to make calls.
- Do not use this product in other areas where wireless communication devices are prohibited.
- Turn off the walkie-talkie before boarding an aircraft; any use of the walkie-talkie must comply with airline regulations or crew instructions.
2.5. Usage Notes
During the use of this product, please observe the following precautions to avoid property damage or personal injury:
- Do not use unapproved or damaged accessories.
- When transmitting with the walkie-talkie, hold it vertically and keep the microphone 3 to 4 cm from your lips. When transmitting, the antenna should be at least 2.5 cm from your body.
- Do not receive at high volume for extended periods.
- Do not place this product above airbags or in areas where airbags may deploy.
- Do not place this product and its accessories within reach of children and pets.
- Use this product within the specified operating temperature range.
- Prolonged transmission may cause the device to heat up; allow it to cool down.
- Always press keys gently; avoid excessive force.
- Do not disassemble, modify, or repair this product or its accessories without authorization.
- If you wear the walkie-talkie on your body, ensure the walkie-talkie and its antenna are at least 2.5 cm from your body during transmission.
2.6. Battery Safety Precautions
2.6.1. Prohibited Charging
Do not perform charging operations in the following places or situations to avoid property damage or personal injury:
- Do not charge or replace the battery in places where fuel, chemicals, explosive gases, or other flammable and explosive materials are stored.
- If the battery or device accidentally gets wet, wipe it dry with a clean cloth before charging; otherwise, charging is prohibited.
- Do not charge the battery if it leaks, deforms, or overheats.
- Do not use unapproved chargers for charging.
- Do not charge near strong radiation sources.
- Do not overcharge the battery, as this will affect battery life.
2.6.2. Maintenance Notes
To ensure proper battery function and extend its life, please observe the following precautions:
- Dust accumulation on battery contacts may affect normal charging, so clean them promptly with a clean, dry cloth.
- Recommended charging ambient temperature is between 5℃ and 40℃; charging at excessively high or low temperatures will shorten battery life or even cause leakage.
- If charging a device with the battery installed, it is recommended to turn off the device to ensure proper battery charging.
- Do not plug or unplug the power supply and battery during charging to avoid interfering with normal charging.
- Do not dispose of batteries in fire.
- Do not expose the battery to direct sunlight for extended periods or place it near other heat sources.
- Do not squeeze, puncture, or disassemble the battery casing.
2.7. Transportation Notes
- Do not transport damaged batteries.
- Ensure that batteries in the packaging box do not short-circuit. If there are multiple batteries in the same box, pack each battery separately.
- If the walkie-talkie contains a battery, it must be turned off and measures taken to prevent accidental activation.
Shipping documents should clearly list the items being transported and indicate battery shipping labels on the packaging box. For local laws, regulations, and other information, please consult your carrier.
2.8. Recycling and Disposal Safety Precautions
All our products (including but not limited to walkie-talkies and batteries) have a certain lifespan. After their lifespan, they should not be disposed of as general waste but should be recycled according to local laws and regulations.
3. Package Contents
The package box contains the following items. If any items are missing or damaged, please contact your product dealer.
- 1 x Main Unit
- 1 x Li-ion Battery Pack
- 1 x Intelligent Charger Base
- 1 x Belt Clip
- 1 x High Gain Antenna
- 1 x Lanyard
- 1 x User Manual
Note: For antenna frequency bands, please refer to the color ring label at the bottom of the antenna. If the label does not specify the frequency band, refer to the main unit label for the specific frequency band.
4. Product Overview
4.1. Main Features
- Frequency Range: FM Radio 65-108MHz; 136-174MHz (RX&TX); 220-260MHz (RX&TX); 400-480MHz (RX&TX); 350-390MHz (RX); AM 108-136MHz (RX).
- Full keypad for manual frequency input, 999 channel memory.
- One-key frequency matching, easy pairing (copy channel configuration parameters).
- Frequency hopping and scrambling functions for call privacy.
- Stopwatch function, power-on password management.
- DTMF encoding and decoding, 15 DTMF calls.
- English/Chinese language selection, menu and channel voice prompts.
- Dual watch, dual band single watch, single band single watch modes.
- 8W/4W/2W RF output, high/low power adjustable.
- Supports US/Canada NOAA weather reception.
- FM radio function (reception frequency 65-108MHz).
- Automatic or manual keypad lock, LCD backlight, and key backlight function.
- High, medium, low power adjustment, maximum power up to 8W (8.2V power supply).
- High capacity battery, super long standby, Type-C direct charging, and cradle charging options.
- Special LED flashlight, sound and light alarm function (three alarm settings) for your safety.
- Repeater function settings: frequency difference, frequency difference direction, reverse frequency, repeater activation tone settings (1750HZ, 1450HZ, 2100HZ, 1000HZ).
- 1.77" color large screen, full keypad, fully open menu operation, easy channel storage and deletion, simple operation, free from programming software constraints.
- User customization: power-on image, power-on password, channel display mode, key tone, transmission end tone, English/Chinese menu and language settings.
Note: BF-5RH series products are divided into M version and L version. The M version has air band AM108-136MHz, police band 350-390MHz scanning reception and scrambling function. The L version does not support voice scrambling, air band AM108-136MHz, and police band 350-390MHz scanning reception.
4.2. Familiarizing with the Walkie Talkie
- Power/Volume Switch
- Radio/Emergency Alarm Switch
- PTT Transmit Key
- VFO/MR Mode Key
- RX_TX Indicator Light
- Flashlight/Monitor Key
- A/B Up/Down Frequency Switch Key
- Menu Key
- Numeric Keypad
- Antenna Connector
- LED Flashlight
- Color LCD Screen (1.77 inches)
- Accessory Jack (External Headset/Programming Jack)
- Speaker
- Scan Key
- Exit Key
- Up/Down Navigation Key
- Type-C Charging Port
- Charging Indicator Light
- Battery Lock
4.3. LCD Display Icon Description
| Icon | Description |
|---|---|
| RSSI | Signal strength indicator. |
| H | Current transmit power is high (longest communication distance, highest power consumption). |
| L | Current transmit power is low (most power-saving, closer distance). |
| ♪ | Side tone switch is set to key side tone/keypad + ID code; this symbol appears. |
| DCS | This symbol indicates the current sub-tone is digital sub-tone. |
| CT | This symbol indicates the current sub-tone is analog sub-tone. |
| + | Appears in frequency mode, indicating the transmit frequency is the receive frequency plus a frequency difference, set in menu item 28. |
| - | Appears in frequency mode, indicating the transmit frequency is the receive frequency minus a frequency difference, set in menu item 28. |
| D | Appears when dual-band standby is enabled, indicating it is in dual-standby mode and can monitor two frequency points displayed on the screen simultaneously. |
| Keypad Lock Icon | Appears when the keypad is locked; press and hold the key to unlock, and the symbol disappears. |
| VOX Icon | Indicates VOX transmission function is activated; transmission starts when microphone sound pressure level reaches the set value. |
| R | Receive and transmit frequencies are reversed in frequency mode/channel mode. |
| N | This symbol appears when the channel is operating in narrow band mode. |
| Battery Icon | Displays current battery level; full battery indicator; low battery indicator; battery nearly depleted, the outer frame of this icon flashes, and the walkie-talkie is prohibited from transmitting. |
| Work Frequency | A/B band work frequency. |
| Pointer | A/B band pointer. |
| Numeric Sequence | In channel mode, channel number of A/B band. |
4.4. LED Status Indicator
| LED Indicator Color | Status Description |
|---|---|
| Green (solid) | Receiving signal |
| Red (solid) | Transmitting signal |
5. Setup
5.1. Installing Accessories
5.1.1. Installing the Antenna
Rotate the antenna clockwise until it is tight. To remove the antenna, rotate it counter-clockwise.
Caution: Do not hold the top of the antenna and swing the product, as this will reduce the performance and lifespan of the antenna.
5.1.2. Installing the Belt Clip
Use the included screws (two) to attach the belt clip to the back of the walkie-talkie.
5.1.3. Installing the Battery Pack
Before installing or removing the battery, ensure the walkie-talkie is completely turned off by rotating the power/volume knob counter-clockwise.
To install the battery pack:
- With the back of the walkie-talkie facing you, align the protrusions on the top of the Li-ion battery pack with the slots on the back of the walkie-talkie.
- Press the bottom of the battery down and tighten the fixing screws.
To remove the battery pack:
- With the back of the walkie-talkie facing you, loosen the fixing screws until the screws are disengaged from the body.
- Lift the bottom of the battery and pull it backward until the battery pack is completely separated from the walkie-talkie.
5.1.4. Installing Audio Accessories
- Flip open the accessory jack cover.
- Align the accessory plug with the accessory jack and push it in firmly.
Caution: Ensure accessories are installed correctly, otherwise, the external headset or walkie-talkie programming may be affected.
6. Battery Charging
Important: Always ensure the product is turned off when charging.
Use the designated charger cradle to charge the battery. The indicator light on the charger cradle shows the charging status (see table below).
- Insert the power adapter plug into a power outlet.
- Insert the other end of the power adapter into the jack on the back of the charger cradle.
- Place the battery or the product with the battery correctly into the charger cradle.
The indicator light on the charger cradle shows the charging status. When the indicator light is red, charging has started. When the indicator light turns green, charging is complete.
6.1. Current Charging Status Indicator
| LED Color | Status |
|---|---|
| Green (slow flash) | Standby (no load) |
| Red (solid) | Charging |
| Green (solid) | Battery fully charged |
Notes:
- For optimal battery performance, charge for at least 4 hours during the first charge.
- Refer to the "Safety Information Manual" for necessary battery safety information.
6.2. Battery Level Indication
You can check the remaining battery level via the battery symbol on the screen.
| Battery Icon | Battery Level |
|---|---|
| Full bars | High |
| Two bars | Medium |
| One bar | Low |
| Empty bar | Insufficient |
7. Basic Operation
7.1. Power On/Off
To power on, rotate the [Power/Volume Control] knob clockwise until you hear a "click" sound and a short prompt tone. To power off, rotate the knob counter-clockwise until you hear a "click" sound.
7.2. Adjusting Volume
After powering on, rotate the [Power/Volume Control] knob clockwise to increase the voice reception volume, and counter-clockwise to decrease it.
7.3. Channel and Frequency Mode Selection
In standby mode, press the [VFO/MR] key to switch between channel mode and frequency mode.
- In channel mode, the channel number will be displayed on the right.
- In frequency mode, VFO will be displayed on the right.
7.4. Frequency Input
In VFO mode, there are two ways to input frequencies:
Method 1: Press the ▲ or ▼ keys to input the desired frequency using the preset step frequency.
Method 2: Use the numeric keypad to manually input a precise frequency.
Example: To set the operating frequency to 144.97500, sequentially input [1][4][4][9][7][5]. The screen will display 144.97500 VFO.
Step Frequency Setting Path: Press MENU + 1 Step Frequency >> Set step frequency 2.5/5.0/6.25/10.0/12.5/20.0/25.0/50.0/100KHz.
8. Advanced Features
8.1. Channel Selection
In channel mode, directly press the ▲ or ▼ keys to select channels. Press and hold ▲ or ▼ keys to quickly switch channels up or down. When the voice prompt function is enabled, the corresponding channel will be broadcast.
8.2. Initiating a Call
To ensure optimal reception volume, keep the microphone 2.5 cm to 5 cm from your mouth during transmission.
To make a call: After selecting a channel, press and hold the [PTT] key. The walkie-talkie will be in transmit mode, and the red indicator light will be solid. Then speak into the microphone in a normal tone.
To receive a call: Release the [PTT] key. A transmission end tone will sound. The walkie-talkie will be in receive mode. When receiving a call, the green indicator light will be solid.
Note: In frequency mode, input the allowed operating frequency using the numeric keypad, then press and hold the [PTT] key. The walkie-talkie will be in transmit mode, and the red indicator light will be solid. Then speak into the microphone in a normal tone.
8.3. Monitor Function
In standby mode, press and hold the [SK2] key to activate the monitor function. Release the [SK2] key to exit the monitor function.
8.4. Keypad Lock
When the numeric keypad is unlocked, press and hold # for 2 seconds to lock the keypad. The keypad lock icon will appear on the top line of the screen. To unlock, press and hold # again for 2 seconds.
8.5. FM Radio Function
Turn on the walkie-talkie, short press the [SK1] key to enter FM radio mode.
Press ▲ or ▼ to search for radio stations at preset step frequencies, or press SCAN to automatically search for radio stations. Press the [SK1] key to exit radio mode.
8.6. Sound and Light Alarm Function
Turn on the walkie-talkie, long press the [SK1] key to activate the alarm function, and the speaker will emit an alarm sound.
Note: Alarm mode can be set via menu 32. You can choose from three modes: local alarm, transmit alarm tone, and transmit alarm code.
8.7. LED Flashlight Function
Turn on the walkie-talkie, short press the [SK2] key once to turn on the bottom flashlight; short press the [SK2] key twice to make the flashlight flash; short press the [SK2] key again to turn off the flashlight.
8.8. Repeater Activation Tone
When the walkie-talkie is operating in repeater mode, even if the channel is locked, you can still activate the repeater by transmitting a repeater activation tone. To do this, press and hold the [PTT] key, then press the [SK2] key to transmit a 1750Hz tone.
Note: The repeater activation tone can be set via menu 37. You can choose from 4 audio tones: 1000Hz, 1450Hz, 1750Hz, 2100Hz.
8.9. Reverse Frequency Function
In standby mode, short press the R key to reverse the receive and transmit frequencies. "R" will appear on the top of the screen. This function is commonly used for repeater channels.
8.10. Stopwatch Function
A. Press MENU to enter the function menu settings.
B. Input numeric [4][4] to enter menu 44 (Stopwatch).
C. Press MENU to activate the stopwatch function. Stopwatch timing operations are as follows:
- Press MENU to start timing.
- Press MENU again to stop timing.
- Press EXIT to exit the stopwatch function.
8.11. One-Key Scan (Wireless Copy Frequency)
This unit acts as a receiver, allowing it to scan radio frequencies from the air and store the scanned frequencies and sub-tones into channels. Operation is as follows:
A. Long press the SCAN key to enter scan mode. The screen displays "SCAN SEARCH...".
B. The transmitting unit continuously transmits. This unit will receive valid frequencies (strongest and most stable signal) and display the received frequency.
- If there is a sub-tone, the sub-tone value will be displayed.
- If there is no sub-tone, NONE will be displayed.
C. You can press the MENU key to save the scanned frequency and sub-tone to a channel.
Note: During scanning, press the VFO/MR key to switch between UHF or VHF bands. During scanning, the distance between the transmitting unit and the receiving unit should be kept between 0.5-1 meter.
8.12. Channel Scan
In channel mode, long press the SCAN key to enter channel scan mode. The walkie-talkie will scan between added channels. When an active channel is found, it will automatically stop on that active channel until the channel becomes idle. If the channel is idle for 5 seconds, scanning resumes.
When stopped on an active channel, you can initiate a call by pressing the [PTT] key.
Press the EXIT key to exit scanning.
Note: Scan resume methods can be set via menu 21. There are three resume methods: Time, Carrier, and Search.
8.13. Sub-tone Scan
In frequency mode, disable the dual-band standby function by operating menu 07 (Dual-band standby). Set the receive frequency before performing sub-tone scanning to ensure that signals can be received at that frequency.
8.13.1. Scanning Analog Sub-tones
A. In frequency mode, input the correct receive frequency using the numeric keypad (known receive frequency).
B. Press MENU to enter the function menu settings.
C. Input numeric [1][4] to enter menu 14 (Scan Analog Sub-tone).
- Or press ▲ or ▼ to select menu 14.
D. Press MENU to start analog sub-tone scanning.
- When the analog sub-tone numbers change, it indicates that the machine has entered analog sub-tone scanning mode. The analog sub-tone numbers will change rapidly according to the standard sub-tone sequence. When the machine detects a sub-tone in the received signal that matches one of the standard analog sub-tones, the machine will stop scanning and receive the voice.
F. Press EXIT to exit analog sub-tone scanning.
8.13.2. Scanning Digital Sub-tones
A. In frequency mode, input the correct receive frequency using the numeric keypad (known receive frequency).
B. Press MENU to enter the function menu settings.
C. Input numeric [1][5] to enter menu 15 (Scan Digital Sub-tone).
- Or press ▲ or ▼ to select menu 15.
D. Press MENU to start digital sub-tone scanning.
- When the digital sub-tone numbers change, it indicates that the machine has entered digital sub-tone scanning mode. The digital sub-tone numbers will change rapidly according to the standard sub-tone sequence. When the machine detects a sub-tone in the received signal that matches one of the standard digital sub-tones, the machine will stop scanning and receive the voice.
F. Press EXIT to exit digital sub-tone scanning.
8.14. VOX Transmission (Voice Operated Exchange)
When VOX function is enabled, you do not need to press the PTT key to transmit. You can automatically transmit by speaking into the microphone, and transmission will stop automatically when you stop speaking, then it will wait for reception. In some work situations where users cannot free their hands to press the [PTT] key, this function can be enabled. Operation method:
A. Press MENU to enter the function menu settings.
B. Input numeric [4] to enter menu 4 (VOX Level).
- Or press ▲ or ▼ to select menu 4.
C. Press MENU to enter VOX level settings. The voice prompt will say "VOX transmission". Press ▲ or ▼ to select 1~9 (higher value means higher sensitivity; e.g., select 3).
When VOX is enabled, the VOX icon will be displayed on the top of the screen.
D. Press MENU to save and return to the previous menu.
- Repeat the above operation, select OFF to disable the VOX transmission function. The VOX icon will disappear. OFF is the default.
Note: After enabling the VOX transmission function, you can transmit by speaking into the microphone; transmission will stop when you stop speaking. You can select the VOX sensitivity level according to the ambient noise level. If the ambient noise is too high, enabling the VOX function may result in continuous transmission.
8.15. Automatic Keypad Lock
The keypad lock function disables numeric keys to prevent accidental activation of functions. This unit can be set to automatic keypad lock function as follows:
A. Press MENU to enter the function menu settings.
B. Input numeric [2][7] to enter menu 27 (Automatic Keypad Lock).
- Or press ▲ or ▼ to select menu 27.
C. Press MENU to enter automatic keypad lock settings. Press ▲ or ▼ to select ON to enable automatic keypad lock.
D. Press MENU to save and return to the previous menu. The automatic keypad lock function is activated.
- Repeat the above operation, select OFF to disable the automatic keypad lock function.
8.16. Dual-Band Standby
When in dual-band standby mode, the walkie-talkie can receive frequencies set for channel A or B. Operation is as follows:
A. Press MENU to enter the function menu settings.
B. Input numeric [7] to enter menu 7 (Dual-band Standby).
- Or press ▲ or ▼ to select menu 7.
C. Press MENU to enter dual-band standby settings. The voice prompt will say "Dual-band standby". Press ▲ or ▼ to select ON.
D. Press MENU to save and return to the previous menu. The dual-band standby function is activated, and the icon D is displayed on the top line of the screen.
- Repeat the above operation, select OFF to disable the dual-band standby function. The icon D on the top line of the screen will disappear.
8.17. Voice Scramble
The scrambling function is a voice inversion function that achieves private communication by scrambling voice signals. This prevents users without a descrambler device or compatible unit from understanding the conversation. Only when both the transmitting and receiving units have the same scrambling frequency enabled can calls be received normally and clearly on the current channel, thus achieving confidential communication. Operation is as follows:
A. Press MENU to enter the function menu settings.
B. Input numeric [4][5] to enter menu 45 (Voice Scramble).
- Or press ▲ or ▼ to select menu 45.
C. Press MENU to enter voice scramble settings. You can choose from the following:
- OFF: Do not enable scrambling function.
- MODE1/MODE2/MODE3.
D. Press MENU to save settings and return to the previous menu.
Important: Ensure that other radios you are communicating with use the same scrambling mode. When scrambling is enabled, the SCR icon will be displayed. Note: The voice scrambling function is an optional feature. The L version does not have this function, and this option is not available in the menu.
8.18. Channel Delete
You may want to delete a stored channel due to incorrect settings or other changes. Operation is as follows:
A. Press MENU to enter the function menu settings.
B. Input numeric [3][1] to enter menu 31 (Channel Delete).
- Or press ▲ or ▼ to select menu 31.
C. Press MENU to enter channel delete operation. Press ▲ or ▼ to select the channel to delete.
- If the numeric prefix displays "CH-", it means the channel number originally had channel parameters and can be deleted.
- If the numeric prefix does not display "CH-", it means the channel number is empty and does not need to be deleted; you can directly store to it.
D. Press MENU to confirm the deletion of existing channel parameters, save, and return to the previous menu.
- If it is an empty channel, press MENU to directly return to the previous menu (no "Confirm" voice prompt).
8.19. Manual Programming
A complete channel includes parameters such as receive frequency, transmit frequency, receive sub-tone, transmit sub-tone, transmit power, channel bandwidth, PTT-ID, busy lock, signaling code, scan add, channel name, etc. Except for scan add and channel name, which need to be edited via programming software, other parameters can be set in frequency mode and then stored into the specified channel number via menu 30.
8.19.1. Frequency Mode and Channel Mode
Frequency mode is also called VFO mode; channel mode is also called MR mode.
In standby mode, press the [VFO/MR] key to switch between frequency mode and channel mode. Frequency mode is the basic mode for frequency editing.
8.19.2. Example 1: Editing a Repeater Channel with Analog Sub-tone (CTCSS)
Example: Create a new stored channel in channel 10.
Receive frequency: 432.55000, Transmit frequency: 437.55000 (frequency difference +5.0MHz), Transmit sub-tone: 123.0
Operation steps are as follows:
- Press EXIT to exit the menu, press [VFO/MR] to switch to frequency mode, VFO is displayed on the right.
- Sequentially press the keypad: [3][1] MENU [1][0] MENU (Deletes existing data in channel 10, if any).
- Press [1][2] MENU [1][2][3] MENU (Selects transmit analog sub-tone, e.g., CTCSS:123.0).
- Input receive frequency (e.g., 43255000).
- Press [3][0] MENU [1][0] MENU (Enters channel storage, e.g., channel 10).
- Press EXIT to return.
- Input transmit frequency (e.g., 43755000).
- Press [3][0] MENU [1][0] MENU (Enters the same channel storage, e.g., channel 10).
- Press EXIT to return.
- Press [VFO/MR] to switch to channel mode, the channel number will reappear on the right.
8.19.3. Example 2: Editing a Simplex Channel with Analog Sub-tone (Same Receive/Transmit Frequency)
Example: Create a new stored channel in channel 10.
Receive and transmit frequency: 432.66250 (TX_RX same frequency), Transmit sub-tone: 123.0
Operation steps are as follows:
- Press EXIT to exit the menu, press [VFO/MR] to switch to frequency mode, VFO is displayed on the right.
- Sequentially press the keypad: [3][1] MENU [1][0] MENU (Deletes existing data in channel 10, if any).
- Press [1][3] MENU [1][2][3] MENU (Selects transmit analog sub-tone, e.g., CTCSS:123.0).
- Press A/B key to select the A segment pointer.
- Input receive frequency (e.g., 43266250).
- Press [3][0] MENU [1][0] MENU (Enters channel storage, e.g., channel 10).
- Press EXIT to return.
- Press [VFO/MR] to switch to channel mode, the channel number will reappear on the right.
8.19.4. Repeater Programming
The following instructions assume you know the transmit and receive frequencies used by the repeater and have the right to use them.
- Press EXIT to exit the menu, press [VFO/MR] to switch to frequency mode, VFO is displayed on the right.
- Use the numeric keypad to input the repeater's transmit (receive) frequency.
- Press MENU to enter the menu.
- Input [2][9] on the numeric keypad to enter frequency difference frequency. Use the numeric keypad to input the specified frequency difference frequency.
- Press MENU to confirm and save.
- Input [2][8] on the numeric keypad to go to frequency difference direction. Use ▲ or ▼ to select positive (+) or negative (-) frequency difference.
- Press MENU to confirm and save.
- Press EXIT to exit the menu. If all goes well, you should be able to make a test call through the repeater.
10. Specifications
| Category | Parameter |
|---|---|
| General Specifications | |
| Number of Channels | 999 groups |
| Channel Spacing | ≤16KHz |
| Operating Voltage | DC 7.4V (rechargeable Li-ion battery) |
| Frequency Stability | ±2.5ppm |
| Antenna Impedance | 50Ω |
| Transmitter Section | |
| Transmit Current | ≤1.6A |
| Modulation Mode (Wide/Narrow) | 16KΦF3E / 11KΦF3E |
| Max Frequency Deviation (Wide/Narrow) | ≤5KHz / ≤2.5KHz |
| Signal-to-Noise Ratio (Wide/Narrow) | ≥45dB / ≥40dB |
| Receiver Section | |
| Receive Sensitivity | ≤0.25uV (12dB SINAD) |
| Max Audio Power | 1W@10% |
| Signal-to-Noise Ratio | ≥45dB |
| Receive Current | ≤380mA |
| Max Audio Power | 1W@10% |
*All specifications are subject to change without notice or liability.
11. Troubleshooting Guide
| Problem | Solution |
|---|---|
| No power, cannot turn on | The battery may be depleted. Please replace the battery or recharge it. The battery may not be installed correctly. Please remove the battery and reinstall it once. |
| Battery power does not last long after charging | The battery has reached the end of its life (approximately 300 charge/discharge cycles). Please replace the battery. |
| Cannot communicate with other members in the group | Confirm that the frequency and sub-tone signals you are using are the same as those of other members in the group. Other members in the group may be too far away. Confirm that you are within the effective range of other walkie-talkies. |
| Short communication distance | Confirm that the antenna is properly connected. Confirm that it is the original antenna. The battery voltage is normal. Adjust the squelch level. |
| Other (non-group) sounds appear on the channel | Please change the sub-tone signal. At this time, all walkie-talkies in the group must change their signal tone. |
| Loud noise | 1. If the communication distance with other members is too far, move closer to the effective communication range, then turn off and turn on the walkie-talkie again. 2. If the location is not ideal, such as being blocked by tall buildings, or in a basement, move to an open and flat area, then turn off and turn on the walkie-talkie again. 3. Avoid external environmental or electromagnetic interference that may cause frequency interference. |
If the above methods do not resolve your issue, or if you encounter other malfunctions, please contact your local dealer for further technical support.
12. Maintenance and Cleaning
To ensure the good performance of this product and extend its lifespan, please familiarize yourself with the following content for daily maintenance and cleaning of this product.
12.1. Maintenance
- Do not puncture or scratch this product with hard objects.
- Do not store this product in an environment containing corrosive electronic circuit substances.
- When carrying or using this product, do not pull the antenna or headset cable.
- When not using accessories, cover the accessory jack.
12.2. Cleaning
Caution: Before cleaning, turn off the power and remove the battery.
- Regularly use a clean, dry, lint-free cloth or brush to wipe away dust from the surface of this product and the charging contacts.
- The keys, control knobs, and casing of this product are prone to getting dirty. Use a neutral detergent and a non-woven cloth for cleaning. Do not use detergents, alcohol, sprays, or petroleum-based chemicals for cleaning to avoid damaging the surface and casing of the product.
- After cleaning, ensure the product is completely dry before use.
13. Environmental Compliance
13.1. Restricted Substances or Elements Identification Table
"Management Measures for the Restriction of Hazardous Substances in Electrical and Electronic Products" Restricted Substances or Elements Identification Table.
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (CrVI) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Metal Components | X | O | O | O | O | O |
| Plastic Components | O | O | O | O | O | O |
| Glass Components | X | O | O | O | O | O |
| Circuit Board | X | O | O | O | O | O |
| Power Supply (if any) | X | O | O | O | O | O |
| Accessories | X | O | O | O | O | O |
This table is compiled in accordance with the provisions of SJ/T 11364-2014.
O: Indicates that the content of this hazardous substance in all homogeneous materials of this component is below the limit requirements specified in GB/T 26572-2011.
X: Indicates that the content of this hazardous substance in at least one homogeneous material of this component exceeds the limit requirements specified in GB/T 26572-2011, and there is currently no mature alternative solution in the industry, complying with the EU RoHS directive environmental requirements.
Note: After this product exceeds its service life or cannot function normally after repair, it should not be discarded at will. Please hand it over to an enterprise qualified to handle waste electrical and electronic products. For correct methods, please consult national or local regulations on waste electrical and electronic product disposal.
14. User Tips
- Antenna Upgrade: For improved reception, consider purchasing a better antenna.
- Battery Life: The battery typically lasts about 2-3 days in standby mode.
- Long-Term Storage: If not using the radio for an extended period, it is recommended to disconnect the battery as it draws a small current even when powered off, which can drain a charged battery over 6-12 months.
- Originality Check: Verify that both the radio and battery are original and properly branded.
- Programming Software: Programming software is available for advanced customization.
- Airband Transmission: The M version supports airband reception and scrambling, but transmission capabilities on airband may be restricted or require specific licensing.
15. Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your authorized dealer. Technical support and service are available through your point of purchase or the manufacturer's official channels.
For further assistance, please refer to the official user manual PDF: Baofeng UV-5RH User Manual (PDF).