KALADA 18 in 1 car symphony ambient lights

Contents

KALADA 18-in-1 64-Color RGB Symphony Car Ambient Light System

Model: 18 in 1 car symphony ambient lights

Brand: KALADA

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KALADA 18-in-1 64-Color RGB Symphony Car Ambient Light System. This system is designed to enhance your car's interior with customizable, synchronized ambient lighting controlled via a Bluetooth APP.

Product components and installed view of the ambient lighting system

Figure 1: Overview of the ambient lighting system components and an installed view.

2. Safety Information

  • Ensure the vehicle's power is off before beginning installation to prevent electrical shock.
  • Always connect to a 12V power source.
  • Do not modify the product in ways not described in this manual. Unauthorized modifications may void the warranty and pose safety risks.
  • Handle wiring carefully to avoid short circuits or damage to vehicle components.
  • If you are unsure about any installation step, consult a professional auto electrician.
  • All products are not guaranteed by wire cutting, unless specified.

3. Package Contents

Your package should include the following components:

  • Main Controller (with QR Code)
  • Sub Controllers (multiple, depending on the kit version, e.g., 4 for a 6-in-1 kit)
  • LED Acrylic Light Strips (various lengths)
  • Wiring Harnesses
  • Installation Tool (e.g., plastic pry tool)
  • Horn Lights (if included in your specific kit, e.g., 4pcs horn light)
Box contents including wires, controllers, and installation tool

Figure 2: Example of package contents.

4. Specifications

FeatureSpecification
Brand NameKALADA
Model Name18 in 1 car symphony ambient lights
Item TypeAtmosphere lamp
Special FeaturesBluetooth APP Control
Voltage12 V
MaterialLED Acrylic Strips
Item Weight0.7 kg
CertificationCE
OriginMainland China

5. Setup and Installation

Before permanent installation, it is recommended to test the product functionality.

5.1. Preparations Before Installation

  1. **Distinguish Main Module and Sub Modules**: The module with a QR Code is the main control unit. It projects signals and synchronously controls all sub modules. The remaining modules are sub modules, which receive instructions from the main module for synchronous color change.
  2. **Power On**: The main module must be powered on for the sub modules to light up.
  3. **APP Connection**: Scan the QR code on the main module to download the control APP (e.g., Magic Lantern). Turn on Bluetooth on your device; the APP should connect automatically. (Note: Android systems may require position function to be enabled).
  4. **Test the Product**: After receiving the product, connect it to a 12V car battery (do not use an external power supply). If it functions correctly, proceed with installation. If not, troubleshoot before installation.

5.2. Power Connection Mode

Determine if your car's power is Constant Power or ACC Power. This is crucial for correct wiring.

  • **Constant Power (e.g., German cars)**: Power is available even when the car is off (e.g., window lifter functions without ignition).
  • **ACC Power (e.g., Japanese & Korean cars)**: Power is only available when the car is ignited (e.g., window lifter functions only with ignition).

5.3. Central Console & Footlight Main Module Installation

Diagram of car interior lighting zones

Figure 3: Car interior lighting zones.

Diagram showing luminous position display in a car

Figure 4: Luminous position display in a car.

  1. **Positive Pole Connection**: Connect the ACC 10-15A Fuse (recommended to add 5A from the original fuse current). Avoid sensor interfaces.
  2. **Negative Pole Connection**: Connect to the car body cast iron/negative pole.
  3. **Note**: Automatic headlights, Console GPS, DVD wiring are not available for direct connection. (INPUT: 6-18V, OUTPUT: 3V/5V)

5.4. Door Panel Sub Module Installation

Four sub modules are typically installed on each of the four doors.

  1. **Remove Door Panel**: Carefully remove the car door panel.
  2. **Remove Trim Panel**: Remove screws of the door trim panel and detach the trim panel.
  3. **Route Light Strip**: Thread the acrylic light strip wires from the back of the door panel through the hole in the trim panel to the front.
  4. **Secure Light Strip**: Fasten the light strip to the decorative board using 3M tape. Excess strip can be cut.
  5. **Install Trim Panel**: Install the trim panel along with the light strip back onto the door panel.
  6. **Connect Wires**: Connect the light strip wires on the back of the door panel to the sub module.
  7. **Install Door Panel**: Reinstall the door panel.

5.4.1. Testing Door Panel Power Supply

This step is crucial to identify the correct power source for door sub-modules.

  • **For ACC Power (Japanese/Korean cars)**:
    1. **MUST** ignite the car before testing positive & negative poles.
    2. Find the positive pole (6-18V available, thick wire).
    3. Find the negative pole (avoid door iron or screws).
    4. Connect sub-control module with the found power supply, operate the window lifter, and check if the ambient light works normally. Keep testing for 5 minutes.
    5. If the light goes off or flashes when the window is lifted, the power supply is unstable. Find workable positive wires again.
  • **For Constant Power (German cars)**:
    1. Ignite the car before testing positive & negative poles.
    2. Find the positive pole (6-18V available, thick wire).
    3. Find the negative pole (avoid door iron or screws).
    4. Connect sub-control module with the found power supply, operate the window lifter, and check if the ambient light works normally. Keep testing for 5 minutes.
    5. If the light flashes when the window is lifted, the power supply is unstable. If the light goes off, determine the positive or negative pole problem and find workable positive wires again.

5.5. Post-Installation Test

  1. After the whole vehicle is installed, turn all lights to white color mode and keep testing for 5-10 minutes.
  2. Move the window lifters up and down to observe if the ambient light goes off or flashes.
  3. If no problems are observed, load the door back.

Video 1: Demonstration of the ambient lighting system in a car interior, showing color changes and effects.

6. Operation

The ambient lighting system is controlled via a Bluetooth-enabled mobile application.

6.1. APP Control

  1. **Download APP**: Scan the QR code on the main controller or search for "Magic Lantern" (or similar, as indicated by the seller) in your device's app store.
  2. **Connect via Bluetooth**: Ensure your phone's Bluetooth is enabled. The app should automatically detect and connect to the main control module. (Android users may need to enable location services).
  3. **Customize Lighting**: Use the app to:
    • Change colors (64 colors available).
    • Adjust brightness.
    • Select various lighting effects (e.g., symphony, music sync, gradient, strobe).
    • The app typically remembers your last settings when the car is turned off and on again.
Image showing mobile app control for ambient lighting

Figure 5: Mobile app interface for controlling ambient lighting.

6.2. Touch Button Control

Some versions of the system may also include physical touch buttons for basic control, such as changing colors or modes. Refer to your specific kit for details.

7. Maintenance

  • **Cleaning**: Use a soft, dry cloth to gently wipe the LED strips and controllers. Avoid using harsh chemicals or abrasive materials that could damage the product.
  • **Inspection**: Periodically check all wiring connections to ensure they are secure and free from damage.
  • **Environmental Conditions**: The product is designed for automotive interior use. Avoid exposing it to extreme temperatures, direct water, or excessive humidity.

8. Troubleshooting

  • **Lights not working or flashing**: If the ambient light does not work normally or flashes, first remove the kit and connect it directly to the car battery for testing. If it works, the issue is likely an installation error (e.g., unstable power supply, incorrect wiring). If it still doesn't work, it may indicate a product fault.
  • **APP connection issues**: Ensure Bluetooth is enabled on your phone and the app has necessary permissions (e.g., location for Android). Try restarting the app and the car's ignition.
  • **No synchronization between main and sub units**: The blocks should synchronize automatically upon power-up. Ensure all sub-controllers are properly connected to the main control box.
  • **Welcome light cannot be turned off/customized**: Some users report that the welcome light effect (rainbow animation on startup) cannot be individually turned off or customized, as the app controls all lights uniformly. However, some users have found success by downloading 'MagicCarLight' and turning off 'Start Light' in the settings.
  • **Loud noises during installation**: This is not a common issue. Double-check all connections and ensure no wires are pinched or rubbing against moving parts.

9. User Tips

  • For less experienced users, consider powering the system via the cigarette lighter socket to avoid complex vehicle door dismantling.
  • The control app (e.g., Magic Lantern) typically remembers your last brightness and color settings, so you don't need to reconfigure them every time you start your car.
  • LED strips can be trimmed to fit specific vehicle areas. Ensure you cut them at designated points if applicable, or carefully trim the acrylic guide to the desired length.
  • The system is compatible with various car models, including BMW F20 and F30, and can significantly enhance the interior ambiance.

10. Frequently Asked Questions

Q: Which mobile application should I use to control the lights?
A: Many users successfully use the "Magic Lantern" app. Scan the QR code on the main controller for the recommended app.
Q: Can I make the foot lamp stay fixed on one color while others follow programming?
A: Individual control of foot lights or other zones is generally limited. Brightness and color settings typically apply uniformly across all lights through the app.
Q: How do I turn off the rainbow welcome start light?
A: Some users report that the welcome light cannot be turned off or customized separately. However, some have found success by downloading the 'MagicCarLight' app and disabling 'Start Light' in its settings.
Q: How do I synchronize the door units with the main control unit?
A: The blocks should synchronize automatically upon power-up. Ensure correct wiring and use the app to confirm linkage.
Q: Can the LED strips be cut?
A: Yes, the LED strips can be trimmed to fit specific vehicle areas. Cutting them does not affect functionality as long as it's done properly.
Q: Does the system have a gradual turn-on effect when the car starts?
A: Users note that the lights turn on immediately with ignition and lack a gradual fade-in effect.
Q: Can I power the system via a cigarette lighter connector?
A: Yes, some buyers successfully power the system through the cigarette lighter socket, which can simplify installation.
Q: Are there different lighting modes available in the app?
A: Yes, the app typically offers multiple lighting modes including music sync, gradient, and strobe effects, with intuitive controls and good customization.

11. Warranty and Support

For warranty information, returns, or technical support, please refer to the seller or the official product documentation. A detailed user manual in PDF format may be available for download from the seller's product page or via the following link: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.