1. Product Overview
This series of DC power supplies is a high-efficiency power supply device designed specifically for low-voltage equipment. It provides a stable output voltage of 12V DC and is available in three models with different rated output currents: 1A, 2A, and 3A. It is suitable for scenarios such as routers, surveillance cameras, LED light strips, small household appliances, and electronic equipment testing. The product adopts a triple protection design against overcurrent, overvoltage, and short circuit, and features a compact size, good heat dissipation, and a long service life, meeting the light power consumption needs of households, offices, and industrial environments.
2. Technical Specifications
| Parameter Category | PS-1201 (12V 1A) | PS-1202 (12V 2A) | PS-1203 (12V 3A) |
|---|---|---|---|
| Input Voltage | AC 100-240V 50/60Hz | ||
| Output Voltage | DC 12V ±0.2V (Note: Some models may support 24V output, refer to product label) | ||
| Rated Output Current | 1A | 2A | 3A |
| Output Power | 12W | 24W | 36W |
| Efficiency | ≥85% | ≥88% | ≥90% |
| Protection Functions | Overcurrent Protection (OCP), Overvoltage Protection (OVP), Short Circuit Protection (SCP) | ||
| Operating Temperature | 0°C-60°C | ||
| Storage Temperature | -20°C-60°C | ||
| Output Adaptor Jack size | 5.5mm×2.1mm (Compatible with 5.25mm x 2.5mm) | ||
| Shell Material | Plastic | ||
| Safety Compliance | FCC / CE / RoHS | ||
| Ambient Humidity | 0~95% Non-Condensation | ||
Key Features
- Built-in over voltage, over current, and short circuit protection.
- PWM design ensures stability and high efficiency of power supply.
- Anti-jamming, passed EMC test, with wave less than 20MV.
- Constant voltage output provides stable power for LED lightings to reach long lifetime.
3. Installation and Usage Steps
3.1. Model Matching Confirmation
Before use, confirm the equipment requirements:
- The rated voltage of the equipment must be 12V DC. Do not use this power supply if the equipment voltage is of other specifications (e.g., 5V, 24V).
- The rated current of the equipment must be ≤ the rated current of the power supply (e.g., a 1A device can use 1A/2A/3A power supplies, while a 3A device can only use a 3A power supply) to avoid damage caused by power supply overload.
3.2. Connection Process
- Connect the Output End: Insert the DC plug of the power supply into the power interface of the equipment, ensuring the plug is fully inserted without looseness.
- Connect the Input End: Insert the AC plug of the power supply into a standard household/office socket (100-240V). At this point, the power indicator (if available) will light up, and the equipment will start receiving power.
- Usage Monitoring: During use, if the power supply case becomes abnormally hot (exceeding 60°C), emits an unusual odor, or the equipment suddenly powers off, immediately disconnect the power supply and troubleshoot the fault.
3.3. Power-off Steps
- First, unplug the DC plug from the equipment end, then unplug the AC plug of the power supply from the socket to avoid damage to the equipment due to instantaneous current impact.
4. Safety Precautions
4.1. Prohibited Improper Operations
- Do not disassemble or modify the power supply (there are high-voltage components inside, and disassembly may cause electric shock).
- Do not operate the power plug with wet hands, and avoid liquid splashing into the power supply.
- Do not place the power supply on soft objects such as quilts or sofas during use (ventilation must be maintained to prevent poor heat dissipation).
4.2. Taboos in Special Scenarios
- Do not use the power supply in high-temperature, humid, dusty, or corrosive gas environments.
- Do not use the power supply for high-power equipment (e.g., motors, heating equipment) to avoid exceeding the rated power.
- Children must use the power supply under adult supervision to prevent accidental contact or ingestion of small parts.
5. Troubleshooting (Fault Handling)
- If the power supply triggers a protection function (e.g., no output after a short circuit), first disconnect all connections, let it stand for 5 minutes, and then try again. If there is still no output, contact after-sales service for repair; do not attempt to repair it yourself.
- The general service life of the power supply is 3-5 years. It is recommended to replace it after exceeding the service life to avoid safety hazards.
6. Maintenance and Care
- Regularly wipe the power supply case with a dry, soft cloth to remove dust and keep the heat dissipation holes unobstructed.
- When not in use for a long time, disconnect the connections between the power supply, the socket, and the equipment, and store the power supply in a dry and ventilated environment.
- Avoid impact or extrusion on the power supply to prevent damage to the case or internal components.
7. User Tips
No specific user tips were available from reviews or Q&A. Always ensure the power supply's output voltage and current match or exceed your device's requirements to prevent damage.
8. Warranty and Support
Warranty Period
From the date of purchase, the product enjoys a 1-year free warranty (damage caused by human factors or improper use is not covered by the warranty).
For further assistance, please refer to the official user manual PDF: User Manual (PDF).