Diymore TIP-2303

Contents

User Manual: DC5-24V 5.8G Microwave Radar Sensor Switch

Model: TIP-2303

Brand: Diymore

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Diymore TIP-2303 DC5-24V 5.8G Microwave Radar Sensor Switch. This device is designed to automatically control single-color LED strip lights based on human presence detection using microwave radar technology.

Diymore TIP-2303 Microwave Radar Sensor Switch

Figure 1: Diymore TIP-2303 Microwave Radar Sensor Switch

2. Product Features

  • Sensitive Sensing: Accurately identifies the movement of living organisms, minimizing inaccurate activations.
  • Strong Anti-Interference: Operates at 5.8GHz, making it less susceptible to external natural factors, ensuring stable and reliable performance.
  • Automatic Light Measurement: Automatically detects ambient light strength to meet lighting requirements. The switch activates only when light is needed and motion is detected.
  • Full-Automatic Sensing: Automatically turns on lights upon detecting human presence and turns them off after a delay when no presence is detected. It is safe, energy-saving, and unaffected by sound or other objects.
  • Wide Range of Use: Ideal for various applications including stairs, corridors, cabinets, courtyards, and parking lots.

3. Specifications

ParameterValue
Product ModelTIP-2303
Working VoltageDC 5-24V
Working CurrentMaximum 5A
Standby Power Consumption0.02W
Transmit Power< 10mA
Operating Frequency5.8GHz
Sensing Distance5-8 meters
Operating Delay30 seconds
DimmingNo
Connection TypeDC 5521 (5.5*2.1mm)
Load Power (Max)60W (≤25W at 5V; ≤60W at 12V; ≤120W at 24V)
MaterialPolymer
Output TypeSwitching Transducer
OriginMainland China

4. Setup and Installation

  1. Safety First: Always disconnect the power supply before beginning any installation to prevent electric shock or damage to the device.
  2. Connection:
    • Connect your DC 5-24V power supply (with a 5.5*2.1mm DC plug) to the input side of the sensor switch.
    • Connect your single-color LED lights to the output side of the sensor switch.
    Connection diagram for radar sensor switch

    Figure 2: Connection Diagram

  3. Placement Considerations:
    • The microwave induction angle is 360 degrees. Consider this when choosing the mounting location to ensure optimal detection coverage.
    • Microwave radar can penetrate non-metallic materials such as plastic, acrylic, wood, glass, and thin walls. However, metal materials cannot be penetrated. This affects sensing distance and placement.
    Microwave radar penetration ability diagram

    Figure 3: Microwave Radar Penetration Ability

  4. Power On: Once all connections are secure, reconnect the main power supply.

5. Operating Instructions

The Diymore TIP-2303 sensor switch operates automatically:

  1. When a person walks into the sensor's detection area (5-8 meters range, 360-degree coverage) and the ambient light conditions require illumination, the microwave switch will automatically turn on the connected LED lights.
  2. The device initiates a 30-second delay system. As long as human presence is detected within the induction area, the LED lights will remain on.
  3. Once the human body leaves the sensor area, the sensor begins to count down the delay time. After the 30-second delay ends, the sensor switch automatically turns off the LED lights.

This intelligent operation ensures safety, convenience, and energy efficiency.

Applications of radar sensor switch

Figure 4: Common Applications

6. Maintenance

  • Water Resistance: This product is NOT waterproof. Ensure it is installed in a dry environment and protected from moisture and water exposure.
  • Cleaning: Gently wipe the sensor's surface with a dry, soft cloth if it becomes dusty. Do not use abrasive cleaners or solvents.
  • Disassembly: The product contains high voltage components. For your safety, non-professionals should NOT attempt to disassemble or repair the device.

7. Troubleshooting

  • Lights Not Turning On:
    • Check if the power supply is connected correctly and providing the correct voltage (DC 5-24V).
    • Verify that the LED lights are properly connected and functional.
    • Ensure the sensor's detection area is clear of obstructions, especially metal objects.
    • Check ambient light conditions; the sensor may not activate if the area is already well-lit.
  • Lights Not Turning Off:
    • Ensure no continuous motion is present within the sensor's detection range.
    • Verify that the 30-second delay period has elapsed after motion ceases.
  • Inconsistent Sensing:
    • Review the installation method to ensure the 360-degree induction angle is utilized effectively for the desired coverage.
    • Consider materials between the sensor and the detection area (e.g., thick wood or multiple layers can reduce sensing distance).

8. User Tips

  • For optimal performance, avoid placing the sensor directly behind thick metallic objects, as microwave signals cannot penetrate metal.
  • When installing in areas with varying ambient light, ensure the sensor is not obstructed from detecting natural light levels for its automatic light measurement function to work correctly.
  • While specific on/off cycle durability is not provided, the device is designed for reliable and long-term operation in typical usage scenarios.

9. Warranty and Support

For any issues, technical support, or warranty inquiries, please contact the seller or manufacturer directly through your purchase platform. Please provide your order details and a description of the issue for prompt assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.