1. Introduction
This manual provides instructions for the Reilyn Power Tool Accessories Spring Set, designed for use with pneumatic nailers in woodworking applications. This set includes 9 pieces of high-quality springs, offering replacements for various functions within your power tools. The springs are crafted for strong toughness, anti-fouling properties, and durability.
2. Components Overview
The Reilyn Spring Set includes a variety of springs, typically comprising compression springs, extension springs, and torsion springs, suitable for different pneumatic nailer models. The set contains 9 pieces.


The springs are categorized by their intended use or size, such as CN55, CN70, and CN80, which correspond to specific tool requirements.


3. Setup and Installation
This spring set is intended for replacing worn or broken springs in compatible pneumatic nailers. Proper installation is crucial for the safe and effective operation of your power tool. Always refer to your specific pneumatic nailer's service manual for detailed disassembly and reassembly instructions.
- Safety First: Before beginning any work on your power tool, ensure it is disconnected from its power source (air compressor, battery, or electrical outlet) to prevent accidental activation.
- Identify the Correct Spring: Carefully compare the damaged spring with the springs in the Reilyn set. Use the provided video and images as a guide to match the type, size, and tension. The video demonstrates how to measure and identify different spring types (CN55, CN70, CN80).
- Disassembly: Follow your tool's manufacturer instructions to safely disassemble the relevant section of the pneumatic nailer to access the spring. Be mindful of small parts and their orientation.
- Spring Replacement: Remove the old spring and install the new Reilyn spring in its place, ensuring it is seated correctly and oriented as the original.
- Reassembly: Reassemble the power tool according to the manufacturer's instructions. Double-check all connections and fasteners.
- Functionality Test: After reassembly, perform a thorough functionality test in a safe environment, away from people or objects, to ensure the tool operates correctly and safely.
Video 1: Demonstration of various spring types and their measurements (CN55, CN70, CN80).
4. Usage
Once installed, the springs function as integral components of your pneumatic nailer, contributing to its firing mechanism, return action, or other mechanical operations. The high-quality materials and craftsmanship ensure strong toughness and reliable performance, which are essential for woodworking tasks.

5. Maintenance
To ensure the longevity and optimal performance of your Reilyn springs and the power tool they are installed in, consider the following maintenance tips:
- Regular Inspection: Periodically inspect springs for signs of wear, corrosion, deformation, or breakage. Replace any damaged springs promptly.
- Cleaning: Keep the area around the springs clean and free from debris, sawdust, or grime. The springs are designed to be anti-fouling and easy to clean.
- Lubrication: Apply a light coat of appropriate lubricant to moving parts and springs as recommended by your power tool's manufacturer to reduce friction and prevent rust.
- Storage: Store your power tool and any spare springs in a dry, clean environment to prevent corrosion.

6. Troubleshooting
If your pneumatic nailer experiences issues after spring replacement, consider these common troubleshooting steps:
- Incorrect Spring: Double-check that the correct spring type and size were used for the specific application. Refer to your tool's manual and the spring set's identification.
- Improper Installation: Ensure the spring is seated correctly and not binding or misaligned. Re-check all connections and reassembly steps.
- Other Component Failure: If the spring replacement does not resolve the issue, the problem might lie with another component of the pneumatic nailer. Consult a professional or the tool's service manual.
- Tool-Specific Issues: Some pneumatic nailers, like the Bostitch NB9CB-1 mentioned in product images, may have specific spring requirements or common issues. Always consult tool-specific resources.

7. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | Reilyn |
| Product Name | Power Tool Accessories Spring Set |
| Model Number | Various (e.g., CN55, CN70, CN80) |
| Number of Pieces | 1 set (9 pcs) |
| DIY Supplies | Woodworking |
| Certification | CE |
| Origin | Mainland China |
| Features | High quality, strong toughness, anti-fouling, easy to clean |
| Package Dimensions (approx.) | Length: 10cm, Width: 8cm, Height: 5cm |
| Package Weight (approx.) | 0.02 kg |
For detailed dimensions of individual springs, please refer to the product video demonstration.
8. User Tips
- Many users have found these springs to be compatible with a wide range of pneumatic nailer models. Always verify compatibility with your specific tool before installation.
9. Warranty and Support
Warranty and Compensation:
- If the product you received is broken or defective, please notify us within 3 days of receipt to discuss a refund or replacement of goods.
- If the product you return is used or artificially damaged, we bear no responsibility to replace or refund.
Feedback:
We value your feedback. If you have any problems during the use of this product, please contact us as soon as possible, and we will endeavor to resolve it at our earliest convenience.
For additional item guides and documents, you may refer to the official PDF manual available at: User manual (PDF).