Introduction
Thank you for choosing the UGREEN Bluetooth Transmitter 5.4. This device allows you to wirelessly transmit audio from your TV, PC, or other optical audio devices to Bluetooth-enabled headphones or speakers. Featuring aptX HD Adaptive technology, it ensures high-quality, low-latency audio for an immersive listening experience. This manual provides detailed instructions for setup, operation, and troubleshooting.
Figure 1: UGREEN Bluetooth Transmitter with SPDIF and Optical Audio Ports. The device features a microUSB port for 5V power input.
Key Features
- Bluetooth 5.4 Technology: Ensures stable and efficient wireless audio transmission.
- aptX HD Adaptive Support: Delivers high-definition audio with dynamic low latency, adapting to your environment.
- Dual Link Support: Connects to two Bluetooth headphones or speakers simultaneously for shared listening.
- Optical Audio (SPDIF) Input: Compatible with a wide range of devices including TVs, PCs, and gaming consoles (e.g., Xbox One X/S) with optical audio output.
- Compact and Portable Design: Easy to integrate into any home entertainment setup.
Figure 2: The transmitter supports Dual Link, allowing simultaneous pairing with two Bluetooth headphones or speakers.
Figure 3: Latency comparison for various audio codecs supported by the transmitter, including SBC (220ms), aptX HD (>100ms), aptX (60-80ms), and aptX Adaptive (40-80ms).
Setup Instructions
- Power On: Connect the transmitter to a 5V power source using the provided USB cable. The transmitter will automatically turn on. The power input port is a microUSB.
- Connect to Audio Source:
- For devices with an optical audio output (e.g., TV, PC, Xbox), connect the optical cable from your audio source to the optical input port on the UGREEN transmitter.
Figure 4: The transmitter is compatible with optical audio devices such as TVs, Xbox One X, and Xbox One S, transmitting audio up to 10 meters without obstructions.
Figure 5: Enjoy gaming with wireless audio by connecting the transmitter to your Xbox One, Xbox One S, or Xbox One X.
- Bluetooth Pairing:
- Ensure your Bluetooth headphones or speakers are in pairing mode.
- The transmitter will automatically enter pairing mode when powered on and searching for devices. The indicator light will typically flash to show it's in pairing mode.
- Once connected, the indicator light will usually turn solid.
Figure 6: Easy Operation: 1. Power on by connecting the power cable. 2. Bluetooth Pairing by turning on the receiver. 3. Power off by pressing the button for 3 seconds.
Operating Instructions
Single Device Connection
After successful pairing, audio from your connected source (TV, PC, etc.) will be transmitted to your Bluetooth headphones or speakers. Adjust the volume directly on your receiving device.
Dual Device Connection (Pairing Two Headphones/Speakers)
The UGREEN Bluetooth Transmitter supports connecting to two Bluetooth audio devices simultaneously. To do this:
- First, pair and connect your primary Bluetooth device (e.g., headphones) as described in the "Bluetooth Pairing" step above.
- Once the first device is connected, put your second Bluetooth device into pairing mode.
- Press the pairing button on the UGREEN transmitter (usually the main button) to initiate pairing with the second device.
- Both devices should now be connected, and audio will be transmitted to both simultaneously.
Power Off
To power off the transmitter, press and hold the main button for approximately 3 seconds. The indicator light will turn off.
Maintenance and Care
- Keep the device dry. Avoid exposure to moisture or liquids.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place when not in use.
- Avoid dropping or subjecting the device to strong impacts.
Troubleshooting
- No Sound Output:
-
- Ensure the transmitter is properly powered on and the indicator light is active.
- Verify that the optical cable is securely connected to both the audio source and the transmitter.
- Check that your audio source (TV, PC) is configured to output audio via its optical port.
- Confirm that your Bluetooth headphones/speakers are paired and connected to the transmitter.
- Adjust the volume on your receiving Bluetooth device.
- Interference with other Bluetooth devices:
-
- If other Bluetooth devices (e.g., a TV set-top box with Bluetooth) are causing interference, try disabling their Bluetooth function when using the transmitter.
- Ensure the TV's optical output is enabled and not blocking other audio outputs if you intend to use both simultaneously.
- Audio Delay/Latency:
-
- The transmitter supports aptX HD Adaptive for low latency. Ensure your receiving Bluetooth device also supports aptX Adaptive or aptX HD for the best performance.
- Environmental factors or distance can affect latency. Try reducing the distance between the transmitter and receiving device.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | UGREEN |
| Model Number | 50213 |
| Product Name | Bluetooth Transmitter 5.4 |
| Wireless Type | Bluetooth |
| Bluetooth Version | 5.4 |
| Supported Codecs | SBC, aptX, aptX HD, aptX Adaptive |
| Interface | USB (for power), SPDIF Optical Audio (input) |
| Sound Track | Double |
| High Definition Support | None |
| Content | AUDIO |
| Origin | Mainland China |
| Certification | CE, FCC |
| Package Dimensions (L x W x H) | 18 cm x 12 cm x 3 cm |
| Package Weight | 0.097 kg |
User Tips
- Volume Adjustment: Always adjust the volume directly on your Bluetooth headphones or speakers. It's recommended to connect your headphones first, then insert them into your ears to avoid sudden loud sounds.
- Sound Quality: Users report clear and high-quality sound with stable connections. The slight delay, if any, is generally not critical for most users.
- Automatic Connection: The device often connects immediately and automatically to previously paired devices, providing a hassle-free experience.
- Reliability: Many users find the device reliable and effective for its intended use, especially for connecting non-Bluetooth TVs to wireless speakers or headphones.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official UGREEN website or contact their customer service directly.
A detailed user manual in PDF format is also available for download: Download User Manual (PDF)