1. Product Overview
The COOSPO HW9 is an armband heart rate monitor designed to track your heart rate during various fitness activities. It utilizes both Bluetooth 5.0 and ANT+ technology for broad compatibility with fitness equipment, bike computers, smartphones, and GPS smartwatches.
Image: COOSPO HW9 Armband Heart Rate Monitor, showing the device with its black and orange patterned strap.
Package Contents
- Heart Rate Monitor with Armband x1
- Charging Cable x1
- User Manual x1
Image: The COOSPO HW9 packaging and accessories, including the monitor, armband, charging cable, and user manual.
2. Setup and Wearing
Device Components
Familiarize yourself with the main components of your HW9 monitor:
- LED Indicator (1): Displays device status and heart rate zone.
- Power On/Off Button (2): Controls device power.
- Optical Sensor (5): Located on the back, measures heart rate.
- Charging Terminals: Located on the back, for connecting the charging cable.
Image: Diagram showing the LED indicator, power button, optical sensor, and charging terminals of the COOSPO HW9.
Wearing Instructions
- Remove the transparent cover from the back of the HW9 monitor.
- Wear the armband on your upper forearm or on the inner or outer side of your upper arm.
- Adjust the armband to a comfortable length so it stays close to the skin. This prevents sliding or loosening during intense exercise and ensures accurate heart rate monitoring.
Note: Do not wear the HW9 on your wrist.
Image: Diagram illustrating the correct placement of the HW9 armband on the upper forearm/arm (green checkmark) and incorrect placement on the wrist (red cross).
3. Operation
Power On/Off
- Power On: Short press the power button. The light blue LED will fast blink and the device will vibrate.
- Power Off: Long press the power button for 2 seconds. The LED light will flash red and the device will vibrate.
Heart Rate Zone Indication
After powering on, if the light blue LED fast blinks, it indicates that the device has not yet detected your heart rate. Once your heart rate is detected, the LED light will display your current heart rate zone:
| Heart Rate Zone* | Intensity | Breathing Light Color |
|---|---|---|
| Zone 1 (<60% MHR) | Very Light | Blue |
| Zone 2 (60%-70% MHR) | Light | Cyan |
| Zone 3 (70%-80% MHR) | Moderate | Green |
| Zone 4 (80%-90% MHR) | Hard | Yellow |
| Zone 5 (90%-100% MHR) | Maximum | Red |
Note: The heart rate zone is calculated based on your Maximum Heart Rate (MHR). A recommended MHR calculation is 220 minus your age. The default MHR value is 200 bpm and can be customized in the CoospoRide/Heartool app.
Image: A cyclist wearing the HW9 armband, with an overlay showing the different heart rate zones and their corresponding LED colors.
Connecting to Devices
The HW9 supports both Bluetooth 5.0 and ANT+ for versatile connectivity.
Image: Diagram illustrating the dual Bluetooth 5.0 and ANT+ connectivity of the HW9, allowing connection to fitness equipment, bike computers, smartphones, and GPS smartwatches.
Connecting to Sports and Fitness Apps (Bluetooth)
- Ensure Bluetooth is enabled on your smartphone.
- Open your preferred Sports & Fitness app (e.g., CoospoRide, Heartool).
- Navigate to the Sensor Settings Menu within the app. For CoospoRide, go to "More" > "Sensors" > "Heart Rate". For Heartool, go to "Settings" > "Device" > "Add Device".
- Find the HW9 Bluetooth ID in the app's list and select it to connect.
Note: Do not pair the sensor directly in your phone's Bluetooth settings. Always connect through the fitness app.
Image: Screenshots of the CoospoRide and Heartool apps, demonstrating exercise analysis and heart rate data display.
Connecting to Smart Devices (Bluetooth and ANT+)
This includes fitness equipment, bike computers, and GPS smartwatches.
- From your smart device's settings menu, select "Add HR sensor" or a similar option.
- Find the HW9's Bluetooth or ANT+ ID and select it to connect.
While the device is working, you can short press the power button to check its Bluetooth connection status:
- Bluetooth not connected: LED light flashes green.
- Bluetooth connected: LED light flashes blue.
For detailed information on sensor compatibility and connection instructions, please refer to: www.coospo.com/faq/hw9
Product Demonstration Video
Video: A demonstration of the COOSPO HW9 Armband Heart Rate Monitor in use, showing how different LED colors indicate various heart rate zones during exercise.
4. Maintenance
Charging
The HW9 has a rechargeable lithium battery with approximately 35 hours of battery life.
- Connect the USB magnetic power cable to the device's charging terminals and a DC 5V power adapter or a computer USB port.
- During charging, the green LED will flash.
- When charging is complete, the green LED will be solid.
- Charging time is approximately 1.5 hours.
Note: To extend battery life, always use a DC 5V power adapter or a computer USB port for charging.
Image: Illustration of the HW9's 35-hour battery life and charging method using a USB cable.
Waterproof Rating
The HW9 is IP67 waterproof, meaning it is protected from dust and can withstand immersion in water up to 1 meter for up to 30 minutes.
Important: Do NOT use the HW9 for swimming.
Image: Visual representation of the HW9's IP67 waterproof rating, with a clear warning not to use it for swimming.
Cleaning
After each use, gently wipe the sensor and armband with a soft, damp cloth. Ensure the device is completely dry before storing or charging.
5. Troubleshooting
Low Battery Alert
- Power <10%: The red LED will slowly blink for 10 seconds and remind the user every 5 minutes.
- Power <1%: The red LED will flash, the device will vibrate, and then turn off automatically.
Connection Issues
- Device not connecting: Ensure Bluetooth is enabled on your phone/smart device. Remember to pair the HW9 through your fitness app's sensor settings, not directly through your phone's Bluetooth settings.
- Checking connection status: Short press the power button while the device is working. A flashing green LED means Bluetooth is not connected; a flashing blue LED means Bluetooth is connected.
- Compatibility: The HW9 is broadly compatible with devices supporting Bluetooth 5.0 and ANT+. If you experience issues, check your device's specifications for HR sensor compatibility.
Battery Draining Quickly
If your monitor is turning off after a short period (e.g., 1.5 hours) despite being fully charged, this is not typical. The expected battery life is approximately 35 hours. Ensure you are using a DC 5V power adapter or a computer USB port for charging. If the issue persists, contact COOSPO support.
6. Specifications
| Feature | Specification |
|---|---|
| Weight | 10.6 g (sensor only) |
| Battery Life | 35 Hours |
| Wireless Transmission | Bluetooth 5.0 & ANT+ |
| Battery Type | Rechargeable Lithium Battery |
| Working Temperature Range | 0°C~40°C (32°~104°F) |
| Charging Temperature Range | 0°C~40°C (32°~104°F) |
| Size | 41.3 x 33.8 x 11 mm |
| Waterproof | IP67 |
7. User Tips
- Comfort and Accuracy: Many users find the armband heart rate monitor more comfortable than traditional chest straps, offering comparable accuracy for most activities.
- High-Intensity Training: For very high-intensity interval training where immediate heart rate changes are critical, some users note a slight latency (around 5 seconds) compared to chest straps. For steady-state or Zone 2 training, the armband is an excellent option.
- Device Compatibility: The HW9 is widely compatible with popular fitness devices and apps, including Garmin (Edge, Fenix, Forerunner series), Coros Pace, Apple Watch, Amazfit (Balance, GTR4), Suunto Race, iGPSPORT, Zwift, and Wahoo.
- No Standalone Display: The HW9 does not have a built-in screen or memory. It must be connected to a compatible phone, smartwatch, or bike computer to display or record heart rate data.
- Distance Tracking: The HW9 measures heart rate only. Distance tracking depends on the GPS capabilities of your paired device (e.g., smartphone or bike computer), not the armband itself.
- Not for Swimming: Despite its IP67 waterproof rating, the HW9 is not designed for use in swimming.
- Proper Placement: For optimal accuracy, wear the armband on your upper forearm or upper arm, ensuring a snug fit. Avoid wearing it on your wrist.
8. Warranty and Support
Contact Information
For support or inquiries, please contact COOSPO:
- Website: www.coospo.com
- E-mail: support@coospo.com
A PDF version of this user manual is available for download. Please refer to the product page or COOSPO's official website for the link.
Disclaimer
The information contained in this manual is for reference only. The product described may be subject to alteration due to the manufacturer's ongoing research and development plans, without prior announcement. We shall not bear any legal responsibility for any direct or indirect, accidental, or special damages, losses, and expenses arising from or in connection with this manual or the contained product.
Important Safety Information
- This product is for sports purposes only and is not intended to replace any medical device.
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, contact COOSPO support.
- Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L' exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.