JKGBL LED Ceiling Light

Contents

Modern LED Ceiling Light User Manual

Model: LED Ceiling Light | Brand: JKGBL

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new JKGBL Modern LED Ceiling Light. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

The JKGBL LED Ceiling Light is designed for indoor spaces such as bedrooms, living rooms, studies, corridors, and balconies. It features a durable wrought iron body, a light-diffusing acrylic panel, and an integrated LED light source module. Available in various sizes and color temperatures, including Warm White, Neutral White, and Cool White, with options for remote dimming.

2. Safety Precautions

  • WARNING: Always turn off the main power supply before installation or maintenance. Verify that the circuit is de-energized using a voltage tester to prevent electric shock.
  • Ensure the ceiling's load-bearing capacity can support the weight of the fixture (recommended ≥ 5kg).
  • If you are unfamiliar with electrical wiring, consult a qualified electrician for installation.
  • Do not use the fixture in humid, high-temperature (>45°C), or flammable and explosive environments.
  • Do not disassemble the internal components of the fixture to avoid circuit damage or safety hazards.

3. Package Contents

Please check the package for the following items:

  • LED Ceiling Light body
  • Expansion screws
  • Self-tapping screws
  • Wiring terminals
  • Instruction manual
  • (Optional) Remote control (for 2.4G remote dimming models)

4. Tools Required for Installation

  • Electric drill
  • Screwdriver
  • Tape measure
  • Insulating tape
  • Wire stripper

5. Installation Guide

Before starting, ensure the main power supply is turned off at the circuit breaker.

Step 1: Positioning and Drilling

Measure and mark the installation holes on the ceiling, aligning them with the base mounting holes of the light fixture. Drill holes at the marked positions and insert the expansion screws.

Diagram showing drilling holes and inserting expansion screws into the ceiling.
Figure 1: Marking and drilling installation holes, inserting expansion screws.
Diagram showing the back of the ceiling light base with mounting holes.
Figure 2: View of the light fixture's base with mounting points.

Step 2: Fixing the Base

Thread the room's power cable through the fixture's inlet hole. Align the base with the expansion screws and securely tighten the self-tapping screws, ensuring the base is firmly attached to the ceiling.

Diagram showing the light fixture base being secured to the ceiling with screws.
Figure 3: Securing the light fixture base to the ceiling.

Step 3: Wiring Connection

Connect the room's power cables to the corresponding wires on the light fixture:

  • Live Wire (L): Connect the room's live wire (typically red/brown) to the fixture's live wire terminal.
  • Neutral Wire (N): Connect the room's neutral wire (typically blue/black) to the fixture's neutral wire terminal.
  • Ground Wire (PE): Connect the room's ground wire (typically yellow/green) to the fixture's ground terminal.

Secure all connections with wiring terminals and insulate them with insulating tape if necessary.

Diagram showing electrical wiring connections for Live, Neutral, and Ground wires.
Figure 4: Wiring connections for the ceiling light.

Step 4: Installing the Lampshade

Slightly bend the acrylic lampshade with both hands and carefully insert it into the fixture until it is securely in place.

Diagram showing how to install the acrylic lampshade onto the light fixture.
Figure 5: Installing the lampshade.

Step 5: Power Test

Restore power at the main circuit breaker. Test if the light turns on normally. If the light does not turn on, turn off the power immediately and re-check the wiring connections and power supply.

Diagram showing the fully installed ceiling light.
Figure 6: Fully installed ceiling light.

6. Operating Instructions

Initial Use

It is recommended to keep the light on for 30 minutes during the first use to check for any abnormal heating or flickering.

Switch Control

  • Wall Switch: Use your standard wall switch to turn the light on/off.
  • Remote Control (if equipped): For models with 2.4G remote dimming, use the provided remote control to adjust light color (3000K-6000K) and brightness. The remote control has a memory function, retaining your last settings if the light is off for more than 3 minutes.
  • Mobile App Control (for AC185V-265V 2.4G models): For compatible models, scan the QR code on the remote control to install the mobile app and control the light via your smartphone. Note: AC90V-110V 2.4G models do not support mobile app control.
Image showing different color temperatures: Cold white 6000K, Neutral light 4000K, Warm white 3000K.
Different color temperature options: Cold white (6000K), Neutral light (4000K), Warm white (3000K).
Image highlighting the flicker-free feature of the light, providing soft and non-glaring illumination.
Flicker-free operation for soft and non-glaring light.

7. Cleaning and Maintenance

After turning off the power, wipe the lampshade with a dry, soft cloth. Avoid using chemical cleaners, as they can corrode the diffuser and damage the finish.

Light Source Replacement

When replacing the LED light source module, ensure the power is turned off. Use an LED module of the exact same specifications to maintain performance and safety.

8. Troubleshooting

Problem Possible Cause Solution
Light does not turn on No power supply; incorrect wiring; faulty LED module. Check main power supply and circuit breaker. Verify all wiring connections are secure. If problem persists, contact after-sales service.
Light flickers or has abnormal noise Loose wiring connection; unstable power supply; faulty LED driver. Turn off power, check all wiring connections. Ensure power supply is stable. If problem persists, contact after-sales service.
Remote control not responding Dead batteries; remote not paired; interference. Replace remote control batteries. Ensure the remote is properly paired with the light fixture (refer to remote control instructions, typically paired before shipment). Check for obstructions or interference.

9. Specifications

Feature Detail
Product NameLED Ceiling Light
BrandJKGBL
MaterialWood, Iron, Ironware + Acrylic
Light SourceLED bulbs (Included)
Installation MethodSelf-contained, Surface mounted
Voltage90 - 260 V (AC)
Luminous Flux2000-82000 Lumens
Is DimmableNo (unless 2.4G remote dimming model)
Switch TypeTouch On/Off Switch (or remote for dimmable models)
Application AreaKitchen, Dining Room, Bedroom, Foyer, Study
Lighting Area10-15 square meters (varies by wattage/size)
FinishPolishing
TechnicsForged
CertificationCE, EMC, ROHS
StyleModern Style
OriginMainland China
Package Dimensions40cm (L) x 40cm (W) x 9cm (H)
Package Weight1.3 kg

Available Sizes and Wattages:

Table showing different ceiling light sizes (diameter), corresponding wattages, and recommended lighting areas.
Table of available sizes, wattages, and recommended lighting areas.
  • Diameter 30CM: 27W, for 3-8 m²
  • Diameter 38CM (40CM): 36W, for 10-15 m²
  • Diameter 50CM: 48W, for 15-20 m²
  • Diameter 60CM: 64W, for 15-30 m²

10. User Tips

  • Inspect Upon Arrival: Carefully inspect the product upon receipt for any cosmetic damage like scratches or chips, especially on wooden components.
  • Mounting Screws: When securing the base to the ceiling, ensure the screws are appropriate for your ceiling material and do not cause damage.
  • Remote Control Issues: If your remote control stops working, first try replacing the batteries. If the blue light flashes but the light doesn't respond, it might need re-pairing (though typically pre-paired). Consult after-sales service if issues persist.

11. Warranty and Support

Warranty Period

This product comes with a 2-year warranty, subject to the purchase certificate. Non-man-made damages are eligible for free repair services during this period.

After-Sales Service

For any issues encountered during installation or use, please contact the seller through the platform where the product was purchased. Provide evidence such as photos or videos if the item is damaged.

Return and Exchange Policy: Please inspect the packaging upon receipt and record the unboxing process. If the fixture is damaged, apply for a refund or replacement through the platform with evidence. A 7-day no-questions return is available for uninstalled items with intact packaging, and a 15-day replacement is offered for quality issues.

For the full user manual in PDF format, please refer to the official document: LED Ceiling Light Installation and User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.