Introduction
Thank you for purchasing the SinoTrack GPS tracker. This manual provides detailed instructions on how to operate the device smoothly. Please read this manual carefully before using the device. Any updates to this manual will be released with the latest product sales without prior notice. The manufacturer assumes no legal responsibility for any errors or omissions made in this manual.
The SinoTrack ST-903 operates using existing GSM/GPRS networks and GPS satellites. It is designed to locate and monitor remote targets via SMS, mobile application, and the internet. This device utilizes advanced GPS and AGPS dual positioning technology for accurate tracking.
Specifications
| Feature | Specification |
|---|---|
| Dimensions (L x W x H) | 48mm x 28mm x 20mm |
| Weight | 50g |
| Network | GSM/GPRS |
| Band | 850/900/1800/1900Mhz |
| GPS Sensitivity | -159dBm |
| GPS Accuracy | 5m |
| Battery | 3.7V 1050mAh Li-ion battery |
| Standby Time | 7-15 days |
| Storage Temperature | -40°C to +85°C |
| Operation Temperature | -20°C to +55°C |
| Humidity | 5%--95% non-condensing |
| Car Charger Input/Output | 12-24V input; 5V-1A output |
| Wall Charger Input/Output | 110-220V input; 5V-1A output |
Hardware Description
Indicator Light Status
| Indicator Light | Meaning |
|---|---|
| Yellow light - On | GPRS connection |
| Yellow light - Flash | No GPRS signal |
| Blue light - On | GPS connection |
| Blue light - Flash | No GPS signal |
| Red light - On | Tracker is Charging |
| Red light - Off | Tracker is not Charging |
GSM SIM Card Installation Guide
The ST-903 model works exclusively with GSM SIM cards. If you are using the ST-903L model, please ensure you use a 4G SIM Card. It is crucial to confirm that the SIM card does not have a PIN Code enabled, as this will prevent the tracker from functioning correctly.
The device supports various SIM card sizes: Normal SIM, Micro SIM, and Nano SIM. Ensure your SIM card is correctly inserted into the tracker's SIM slot.
Quick Setup Guide
-
Activate SIM Card
Install a new SIM card (2G GSM or 4G network function for ST-903L) into your mobile phone. Activate the SIM card by making a call, sending a text, and ensuring it has an active internet connection. Once confirmed, insert the activated SIM card into your tracker.
-
Turn On the Tracker
Charge the tracker for approximately 1 hour initially. The yellow and blue indicator lights will flash as the device searches for network and GPS signals. Allow about 5 minutes in an area with good reception (e.g., near a window or outdoors) for both lights to become solid (ON). If the yellow light continues to flash, it indicates no network connection; try moving to a different location. Note that if a GPS signal is unavailable, the device will use LBS (Location Based Service) for positioning.
-
Setting APN for the Tracker
The tracker requires the correct APN (Access Point Name) settings for its SIM card to connect to the internet. APN content varies by SIM card carrier. You can find your SIM card's APN by:
- Checking your SIM card carrier's website.
- Inserting the SIM card into a mobile phone to find the APN settings.
- Contacting your SIM card provider.
Once you have the APN, send an SMS command from another phone to the tracker's SIM card number to set the APN. The yellow space in the command represents a blank space.
Example: If APN is 'everywhere', username 'eesecure', password 'secure'.
- If APN without username and password: Send command
8030000 everywhere. The tracker will reply "SET OK". - If APN with username and password: Send command
8030000 everywhere eesecure secure.
Note: Different SIM cards have different APN settings. Adjust the command according to your actual APN.
-
Setting GPRS Mode
Send the text command
7100000to the device to set GPRS mode. After approximately 30 seconds, both the blue and yellow/orange lights should remain ON, indicating the tracker is active and ready for online tracking. You can then log in to the SinoTrackPro web platform or app. The default username is your tracker's ID number (found on the product), and the default password is123456.If the tracker shows a 'China location' online, take it to an outdoor area with good signal reception to acquire a proper GPRS signal and update its location.
Operating Instructions
Online Tracking (PC Version)
Access the online tracking platform via your web browser at Pro.SinoTrack.com. Use your tracker's ID number as the username and 123456 as the password to log in.
Applications for Android/iOS
Download the SinoTrack PRO app from the APP Store (iOS) or Google Play (Android). You can also scan the QR code provided in the product documentation for direct download. The app uses the same login credentials as the web platform: Server: Pro.SinoTrack, Username: Tracker ID, Password: 123456.
If you manage multiple SinoTrack GPS trackers and wish to monitor them all under one account, please contact SinoTrack support to arrange for a consolidated account.
SMS Tracking
To get the tracker's location via SMS, either call the SIM card phone number in the tracker or send the message 6690000 to the tracker's SIM card number. You will receive a Google Maps link with the position details.
Example SMS Reply:http://maps.google.com/maps?q=+22.64212, +114.18814 Date: 2017-12-6 Time:1:45 ID: 6170999999 Fix:V Speed:0.0KM/H Bat:80%
Admin Number Setting
After setting an admin number, all SMS operations to the device will only be accepted from this number. This number should be your personal mobile phone number, not the tracker's SIM card number.
- Set Admin Number: Command:
phone number+password 1(e.g.,132657901800000 1where13265790180is your mobile number,0000is the password, and1is the serial number). Reply: "SET OK!" - You can also use the admin number to call the tracker for monitoring.
- The tracker will send alerts (over-speed, shake sensor, low battery) to the admin number.
- Cancel Admin Number: Command:
D101#. Reply: "SET OK!"
Over-speed Alarm Setting
Set an alarm to be notified if the tracker exceeds a specified speed.
- Set Over-speed Alarm: Command:
1220000070(for 70km/h). Reply: "SET OK!" - If the unit speed is over 70km/h, it will send "speed alarm!" to the admin number every 5 minutes.
- Cancel Over-speed Alarm: Command:
12200000. Reply: "SET OK!"
Shake Alarm Setting
Receive an alert if the tracker detects shaking after being stationary for 5 minutes.
- Set Shake Alarm: Command:
1810000T10. Reply: "SET OK!" - The tracker will send "Shock alarm!" to the admin number when it is shocked.
- Cancel Shake Alarm: Command:
1800000. Reply: "SET OK!"
Device Working Mode Setting
The battery life of the tracker depends on the selected working mode.
-
WORK - Keep Working Mode: (ST-903/ST-903L works 18 to 24 hours)
- Command:
WORK0000. Reply: "SET OK!" - The tracker will continuously work and send data at regular time intervals.
- Command:
-
MOVE - Work When Moving Mode: (ST-903/ST-903L works 3 to 10 days)
- Command:
MOVE0000. Reply: "SET OK!" (Factory setting is "MOVE" mode) - The tracker only works when it is moving. When stationary, it enters sleep mode, GPS shuts off, and GSM operates in low consumption mode. Vibration, SMS commands, or calling the tracker can wake it up for 5 minutes.
- Attention: If the device is in MOVE mode but the tracked object (e.g., car) is running all day, the tracker will not save battery and will function similarly to WORK mode, lasting only 18-24 hours.
- Command:
-
STANDBY - SMS or Call to Tracker Mode: (ST-903/ST-903L can standby 15 days)
- Command:
STANDBY0000. Reply: "SET OK!" - In standby mode, GPS is shut off, and GSM operates in low consumption. SMS or calling the tracker will wake it up for 5 minutes.
- Command:
The ST-903 has a 1,050mAh battery. For longer standby times, consider models with larger batteries:
- ST-905: 5,000mAh
- ST-915: 10,400mAh
- ST-925: 20,800mAh
Terminal (Local) Time Setting
The factory setting for GMT is 0.
- Set Time Zone: Command:
8960000E00(for GMT+0). Reply: "SET OK!" - Example:
8960000E01(GMT+1),8960000W01(GMT-1).
Reset Hardware
- Reset Device: Command:
RESET. Reply: "SET OK!"
Read Configuration Data
- Read Config: Command:
RCONF. Reply: The tracker will send back its ID, work mode, IP and Port, and APN settings.
Explanation of Parameters/Codes in SMS Message (RCONF Example)
An example RCONF reply might look like this:
ST-903/ ST-905A, ID:7028313929, UP:0000, U1:,U2:,U3:, MODE:GPRS-MOVE, DAILY:OFF,GEO FENCE:OFF,OVER SPEED:OFF,VOICE:ON, SHAKE ALARM:OFF,SLEEP:ON,APN :internet,,,IP:45.112.204.242:8090,GPRS UPLOAD TIME:30,TIME ZONE:E3.0
Breakdown of parameters:
- ST-903/ST-903L: Model of the tracker.
- ID:7028313929: The unique ID of the GPS Tracker.
- UP:0000: The password for SMS commands.
- U1:,U2:,U3:: Control numbers (if set).
- MODE: GPRS-MOVE: Current GPS work mode.
- DAILY:OFF, GEO FENCE:OFF, OVER SPEED:OFF, VOICE:ON, SHAKE ALARM:OFF, SLEEP:ON: Status of various tracker features.
- APN: internet: The APN of the SIM Card.
- IP:45.112.204.246:8090: The IP address and Port of the tracking server.
- GPRS UPLOAD TIME:30: The GPS data upload interval in seconds.
- TIME ZONE:E3.0: The time zone of the tracker (e.g., GMT+3).
Maintenance and Important Notices
- GPS tracking functions optimally outdoors.
- Ensure your GSM SIM card supports making calls, sending messages, and has an active GPRS network.
- Verify that the GSM SIM card has sufficient balance for continuous operation.
- Confirm that call divert is turned OFF on the GSM SIM card.
- Always insert the GSM phone card correctly into the device.
- Do not attempt to assemble or disassemble the device yourself.
Troubleshooting
| Issue (FAQ) | Instructions/Solutions |
|---|---|
| Fail to turn it on |
|
| No GSM signal |
|
| No GPS signal | A more open view of the sky is recommended to ensure the device can receive the GPS signal normally. |
| No reply to SMS commands | Check if the password is wrong or the command format is incorrect. |
| No reply to calling & no alarm message | Verify that the authorized/admin phone number is correct and properly set up. |
| SMS position OK, but cannot use the APP and web platform | Check if the APN is correctly set. Refer to the 'Setting APN' section (Step 3 in Quick Setup) for correct APN content. |
| Platform position differs from actual position | If there is no upload position time or GPS signal, call the device phone number to receive a position message. If there's no GPS signal, the platform will show the last known GPS positioning location. If it has a GPS signal, it means the device has not yet reached its scheduled upload time. |
User Tips
- Battery Life Management: The battery life of your ST-903 tracker varies significantly with the chosen working mode. For maximum duration (up to 15 days), utilize the STANDBY mode.
- Continuous Online Tracking: If your tracker frequently goes offline, ensure your SIM card has a stable GPRS network connection and sufficient balance. Double-check that the APN settings are correctly configured for your SIM card carrier to maintain continuous online tracking.
- Managing Multiple Trackers: If you own multiple SinoTrack GPS trackers and wish to monitor them all from a single account, contact SinoTrack support. They can assist you in setting up a consolidated account on their platform.
Support
For further assistance or inquiries, please contact SinoTrack support:
- Amazon Support: support@sinotrack.com
- AliExpress Support: sino@sinotrack.com
A detailed user manual in PDF format is also available for download. Please refer to the official product page or contact support for the link to the PDF document: SinoTrack ST-903 User Manual PDF