SUMRY MPS VIII ECO

Contents

SUMRY MPS-VIII ECO Series Hybrid Solar Inverter

User Manual

1. Product Overview

The SUMRY MPS-VIII ECO Series is a versatile hybrid solar inverter designed for both on-grid and off-grid applications. It features a pure sine wave output, dual output functionality, and a built-in MPPT solar charger. This inverter is capable of operating with or without a battery, offering flexibility for various solar power system configurations.

SUMRY MPS-VIII ECO Series Hybrid Solar Inverter with key specifications

Figure 1: SUMRY MPS-VIII ECO Series Hybrid Solar Inverter highlighting 4.2KW/6.2KW, 230VAC, 120A Max Solar Charge Current, 24V/48V Battery Voltage, 500VDC Max PV Input, and 50/60Hz Frequency Range.

SUMRY On/Off Grid Solar Inverter MPS-VIII ECO 4.2KW/6.2KW, emphasizing 'Work without battery' feature.

Figure 2: The inverter highlighting its ability to work without a battery.

2. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your SUMRY Hybrid Solar Inverter. Please follow these steps carefully.

2.1 Unboxing

Carefully open the packaging and remove the inverter and all accessories. Inspect for any damage during transit. Keep the packaging for future transport or storage.

Video 1: Unboxing and initial setup demonstration of the SUMRY Hybrid Solar Inverter, including connection of various cables.

2.2 System Diagram

The inverter integrates solar charging, battery management, and AC output. Below is a typical system diagram illustrating the connections.

System diagram showing connections for Solar Panels, Inverter, Battery, Utility/Generator, and Home Appliances.

Figure 3: System diagram for the On/Off Grid Solar Inverter. Solar panels (360VDC/500VDC nominal/max voltage, 60VDC-450VDC max DC voltage, 6500W max PV power) connect to the inverter. The inverter connects to a 24V/48V battery (Lithium, Lead-acid, LiFePO4). AC input (max 40A) can come from Utility or a Generator. AC output (200/230/240VAC) powers home appliances.

2.3 Physical Installation

The inverter should be mounted in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Ensure adequate clearance around the unit for proper airflow. The dimensions of the inverter are approximately 420mm (D) x 310mm (W) x 110mm (H).

Dimensions of the SUMRY inverter (420x310x110mm) and location of communication ports.

Figure 4: Inverter dimensions and dual communication ports for Battery (BMS RS485) and WiFi (RS232) communication.

2.4 Wiring Connections

All wiring should be performed by a qualified electrician. Ensure all power sources are disconnected before making any connections.

  1. PV Input (PV1+, PV1-, PV2+, PV2-): Connect your solar panel strings to the designated PV input terminals. Ensure correct polarity and that the total PV input voltage and current are within the inverter's specifications (Max PV Input 500VDC).
  2. Battery Connection (BATTERY +,-): Connect the battery bank to the battery terminals. Observe correct polarity. The inverter supports 24V/48V battery systems, including LiFePO4, Lithium, and Lead-acid batteries.
  3. AC Input (AC IN L, N): Connect the utility grid or generator AC input to the AC IN terminals.
  4. Main AC Output (MAIN OUT L, N): Connect your primary loads to the MAIN OUT terminals.
  5. Second AC Output (SECOND OUT L, N): Connect secondary or non-essential loads to the SECOND OUT terminals. This output can be configured for specific usage.
  6. Grounding: Ensure the inverter is properly grounded according to local electrical codes.

2.5 Communication Ports

The inverter features dual communication ports for enhanced system monitoring and control.

  • BMS (RS485): For communication with compatible Battery Management Systems.
  • WiFi (RS232): For wireless monitoring and control via a dedicated app or software.

3. Operating Instructions

Once all connections are securely made and verified, you can proceed with operating the inverter.

3.1 Powering On

  1. Ensure all external circuit breakers are in the OFF position.
  2. Turn on the battery breaker (if a battery is connected).
  3. Turn on the PV array breaker.
  4. Turn on the AC input breaker (if connected to utility/generator).
  5. Turn on the inverter's main power switch.
  6. The inverter's LCD display will light up, and it will initiate its self-test sequence.

3.2 LCD Display and Control

The inverter features a touch button with a 4.3-inch colored LCD for user-friendly operation. The display provides real-time information on system status, power flow, battery charge, and error codes. Use the touch buttons to navigate through menus and configure settings.

3.3 Operating Modes

The SUMRY MPS-VIII ECO Series supports various operating modes, including:

  • Grid-Tie with Battery Backup: Prioritizes solar power, uses battery for backup, and feeds excess power to the grid.
  • Off-Grid Mode: Operates independently from the grid, relying on solar and battery power.
  • Hybrid Mode: Combines grid power with solar and battery, optimizing energy usage.
  • Work Without Battery: The inverter can function directly from solar panels and/or AC input to power loads, even without a connected battery.

You can configure AC/PV output usage timers and charger source priority via the LCD or communication interface.

Key features of the inverter including running without battery, high PV input, 120A MPPT solar charge, dual communication, and dual output.

Figure 5: Inverter features: running without battery, high PV input voltage range (60-500VDC), built-in 120A MPPT Solar charge (max 6200W for 3.6KW/4.2KW, max 6500W for 6.2KW), dual communication ports, and dual output.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Periodically clean the inverter's exterior and ventilation openings to prevent dust accumulation. The inverter includes a built-in anti-dust kit.
  • Connections: Annually check all electrical connections for tightness and signs of corrosion.
  • Battery Health: If using batteries, monitor their health and perform maintenance as recommended by the battery manufacturer. The inverter has a battery equalization function to extend battery life.
  • Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure optimal performance and new features.

5. Troubleshooting

This section provides basic troubleshooting steps for common issues. For complex problems, contact technical support.

  • No Power Output: Check all circuit breakers (AC input, AC output, battery, PV) and ensure they are ON. Verify battery voltage and PV input voltage.
  • Inverter Overload: If an overload alarm occurs, reduce the connected load. The inverter has overload protection.
  • Over Temperature: Ensure the inverter is in a well-ventilated area and its cooling fins are not obstructed.
  • Short Circuit: The inverter features short circuit protection. Identify and resolve any short circuits in the wiring or connected loads.
  • AC Recovering: The inverter has an auto-restart function when AC power is restored.
  • Error Codes: Refer to the specific error code displayed on the LCD for detailed information and solutions in the full manual.

6. Specifications

FeatureSpecification
Model NumberMPS VIII ECO
Output Power1 - 200 KW (Specific models: 4.2KW, 6.2KW)
Output TypeSINGLE (Dual Output)
Size55*43*22CM (Packaging) / 420*310*110mm (Unit)
Weight11KG - 13KG (Unit) / 14.0KG (Packaging)
Brand NameSUMRY
Output Frequency50/60HZ
OriginMainland China
CertificationCE, FCC, RoHS
MPPT Solar Charger120A / 140A (Output current)
Support Battery TypesLifepo4 Batteries, Lithium Battery, Lead-acid battery
Work without batteryYes
Max PV Input Voltage500VDC
Battery Voltage24V / 48V
AC Output Voltage230VAC (200/230/240VAC configurable)
CommunicationUSB, RS232, RS485, Bluetooth, Dry-contact, Built-in WIFI (optional)
Parallel FunctionUp to 6 units
DisplayTouch button with 4.3 inch colored LCD
Output Power Factor1.0

7. User Tips

  • Battery-Free Operation: This inverter is designed to work without batteries, making it a flexible option for direct solar power utilization.
  • Versatile Application: Suitable for various settings, from residential to commercial, due to its hybrid capabilities and dual output.
  • Monitoring Options: Utilize the built-in Wi-Fi (if equipped) and other communication ports (USB, RS232, RS485, Bluetooth) for comprehensive system monitoring and data logging.
  • Scalability: For increased power needs, multiple units can be connected in parallel, up to 6 units.

8. Warranty and Support

The SUMRY MPS-VIII ECO Series Hybrid Solar Inverter comes with a 1-year warranty. For technical assistance, warranty claims, or further information, please contact your authorized SUMRY dealer or customer support.

© 2024 SUMRY. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.