1. Product Overview
The E27 Aluminum Vintage Light Socket with Pull Chain is a classic and functional lighting component designed for various indoor settings. It features a durable aluminum construction, an E27 screw base for standard bulbs, and an integrated pull chain for easy operation.

Figure 1: E27 Lamp Holder (Bronze) with pull chain.
2. Safety Information
- Ensure power is disconnected before installation, maintenance, or bulb replacement.
- Do not exceed the maximum wattage of 250W.
- This device is designed for indoor use only.
- Keep the device and its cord out of reach of children under 3 years old.
3. Setup and Installation
- Preparation: Carefully remove all protective packaging materials from the lamp holder.
- Inspection: Inspect the product for any signs of damage. Do not proceed with installation if damage is found.
- Disassembly: Unscrew the outer shell from the base of the lamp holder to expose the internal wiring mechanism.
- Wiring: Connect the live and neutral wires from your power source to the designated terminals on the internal mechanism. Ensure connections are secure. Refer to Figure 3 for terminal locations.
- Assembly: Carefully reassemble the lamp holder, ensuring no wires are pinched. Screw the outer shell back onto the base.
- Mounting: The lamp holder features an M10 thread for easy installation into compatible fixtures. Securely fasten the holder to your desired lamp base or fixture.
- Bulb Installation: Screw an E27 screw-base bulb (not included) into the lamp holder. Do not overtighten.

Figure 2: Exploded view of the lamp holder components.

Figure 3: Internal view of the lamp holder base showing wiring terminals.
4. Operating Instructions
Once installed and a bulb is fitted, the lamp holder can be operated using the integrated pull chain. Pull the chain once to turn the light ON, and pull it again to turn the light OFF.
5. Maintenance
- Ensure the power is off before cleaning.
- Wipe the lamp holder with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Regularly check for any loose connections or signs of wear.
6. Troubleshooting
- Light does not turn on:
- Check if the bulb is properly screwed in and not faulty.
- Ensure the power supply to the fixture is active.
- Verify that the wiring connections are secure.
- Pull chain not working:
- Ensure the chain mechanism is not jammed. Do not force it.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | VGEBY |
| Model Number | E27 Lamp Holder |
| Material | Aluminum |
| Base Material | Aluminum |
| Power Rating | 250W (Max) |
| Voltage Rating | 250V |
| Bulb Base Type | E27 |
| Total Length | Approx. 7cm / 2.76in |
| Weight | Approx. 48g |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 10cm x 10cm x 3cm |
| Package Weight | 0.041 kg |
8. User Tips
- Ensure secure assembly for optimal performance and safety.
- This lamp holder provides a good fitting for standard E27 bulbs.
- Note: This lamp holder may not be ideally suited for lampshades that require a specific mounting mechanism through a central hole, as its design is primarily for bare bulb or top-mounted shade applications.
9. Frequently Asked Questions (FAQ)
- Q: What type of bulb does this holder support?
- A: This lamp holder is designed for E27 screw base bulbs.
- Q: What is the maximum wattage for bulbs used with this holder?
- A: The maximum supported wattage is 250W.
- Q: Is it easy to install?
- A: Yes, it features an M10 thread for straightforward installation into compatible fixtures.
10. Warranty and Support
For warranty information and customer support, please contact your retailer or the manufacturer directly. A detailed user manual is available in PDF format for further reference.
Manufacturer: Zhongshan Jinbao Lighting Factory
EU Authorized Representative: Nenninger GmbH