Godox TT685II

Contents

Godox TT685II TTL HSS Camera Flash Speedlite User Manual

Model: TT685II

Introduction

Thank you for purchasing the Godox TT685II TTL HSS Camera Flash Speedlite. This flash unit is designed for Canon EOS series cameras and is compatible with E-TTL II autoflash, making your shooting experience simpler and more efficient. It provides correct flash exposure even in complex lighting conditions.

Key Features:

  • Powerful Flash Output: Approximately GN60 (ISO 100, @200mm) with 81 steps of power from 1/1 to 1/256.
  • E-TTL II Compatibility: Supports E-TTL II autoflash, and can function as a transmitter or receiver unit in a wireless flash system for simplified shooting.
  • Dot-Matrix LCD Panel: Provides clear and convenient operation with an intuitive display.
  • Built-in 2.4G Wireless X System: Offers seamless connectivity with compatible flashes or flash triggers for versatile lighting setups up to 100 meters.
  • Comprehensive Functions: Includes HSS (up to 1/8000s), FEC (Flash Exposure Compensation), FEB (Flash Exposure Bracketing), FEL (Flash Exposure Lock), Second-Curtain Sync, and more.
  • Stable Performance: Ensures consistent output and color temperature for even lighting.
  • Firmware Upgradeable: Allows for future updates to maintain compatibility with new camera models.

Safety Warnings

  • Always keep this product dry. Do not use in rain or damp conditions.
  • Do not disassemble. Repairs must be performed by an authorized maintenance center.
  • Keep out of reach of children.
  • Stop using this product if it breaks open due to extrusion, falling, or strong impact. Electric shock may occur if you touch internal electronic parts.
  • Do not fire the flash directly into the eyes (especially those of babies) within short distances, as visual impairment may occur.
  • Do not use the flash unit in the presence of flammable gases, chemicals, or other similar materials. These materials may be sensitive to the strong light emitted from the flash unit, potentially causing fire or electromagnetic interference.
  • Do not leave or store the flash unit if the ambient temperature exceeds 50°C (122°F), as electronic parts may be damaged.
  • Turn off the flash unit immediately in the event of malfunction.

What's in the Box

The standard package includes the following items:

  • Flash Unit x 1
  • Mini Stand x 1
  • Protection Case x 1
  • Instruction Manual x 1
Contents of the Godox TT685II package including flash unit, mini stand, protection case, and instruction manual.
Figure: Contents of the Godox TT685II package.

Parts Names

Flash Body:

  1. Flash Head
  2. Built-in Wide Panel
  3. Wireless Sensor
  4. Focus Assist Beam
  5. Sync Cord Jack
  6. Type-C USB Port
  7. Battery Cover
  8. Hotshoe
  9. LCD Panel
  10. Hotshoe Fixing Buckle
  11. External Charging Port
Diagram showing the parts of the Godox TT685II flash body, including flash head, wide panel, wireless sensor, focus assist beam, sync cord jack, USB port, battery cover, hotshoe, LCD panel, hotshoe fixing buckle, and external charging port.
Figure: Godox TT685II Flash Body Components.

Control Panel:

  1. <MENU> Flash Menu Button
  2. < > Wireless Selection Button
  3. Select Dial
  4. Set Button
  5. ON/OFF Power Switch
  6. < > Test Button / Flash Ready Indicator
  7. <ZOOM> Focus Length Setting
  8. <MODE> Mode Selection Button
  9. < > Lock Setting
  10. <+/-> Power Output
  11. Function Button 1
  12. Function Button 2
  13. Function Button 3
  14. Function Button 4
Diagram showing the control panel of the Godox TT685II flash, detailing the LCD display, function buttons, select dial, power switch, and quick release lock.
Figure: Godox TT685II Control Panel Layout.

LCD Panel in Three Modes:

The LCD panel will only show the settings currently applied. Functions displayed above function buttons 1 to 4 (such as SYNC and A/B/C/D) change according to settings status. The LCD panel will light up when buttons and dials are operated.

  • E-TTL Autoflash Display: Shows zoom, ETTL mode, high-speed sync, second-curtain sync, flash exposure compensation, and effective flash range.
  • Manual Flash Display: Shows manual flash output.
  • Multi Flash Display: Shows number of flashes and flash frequency.
  • Wireless Radio Transmission Display: Shows transmitter unit flash ON/OFF, firing group, and channel.

Setup

1. Loading and Unloading the Battery

The TT685II uses 4 AA batteries (Ni-MH recommended). Ensure correct polarity when inserting.

  1. To unload the battery, hold down the battery and press the compartment, then push the battery downward to take it out.
  2. Insert 4 batteries with the correct polarity after opening the battery compartment, then close and push it to the top.

Tip: When used with the optional Godox Flash Power Box PB960, the TT685II will have more flash times, shorter recycle time, and longer duration.

2. Attaching to a Camera

  1. Rotate the hotshoe fixing buckle to the left and insert the camera flash into the camera's hotshoe.
  2. Rotate the hotshoe fixing buckle to the right until it locks up.
  3. To detach, press the button and rotate the hotshoe fixing buckle to the left until it is loosened.
Diagram showing the quick-release lock mechanism for attaching and detaching the flash from a camera hotshoe.
Figure: Quick-release Lock Mechanism.

3. Power Management

Use the ON/OFF Power Switch to turn the flash unit on or off. Turn it off if it will not be used for an extended period. The flash unit has an auto power off function:

  • Transmitter Mode: Automatically powers off after approximately 90 seconds of idle operation. Half-pressing the camera shutter or pressing any flash button will wake it up.
  • Receiver Mode: Enters sleep mode after a period (adjustable, 60 minutes by default) of idle use. Pressing any flash button will wake it up.

Note: Disabling Auto Power Off function is recommended when the flash is used off camera (C.Fn-STBY, Page 46). Receiver Auto Power Off Timer is set to 60 minutes by default. Another option "30 minutes" is available (C.Fn-RX STBY, Page 46).

4. Firmware Upgrade

The USB port is a Type-C USB socket. Use a Type-C USB connection line. Firmware upgrades require the Godox G3 software. Download and install the "Godox G3 firmware upgrade software" before upgrading, then choose the related firmware file. Refer to the instruction manual of the newest electric version for detailed steps.

Image showing the Type-C USB port on the Godox TT685II flash for firmware updates.
Figure: Type-C USB Port for Firmware Updates.

Operating Modes

1. E-TTL Autoflash Mode

In E-TTL mode, the camera and flash work together to calculate the correct exposure. Multiple TTL functions are available:

  • Flash Exposure Compensation (FEC): Adjusts flash output from -3 to +3 in 1/3rd stop increments. Press the <+/-> button, turn the Select Dial, and press Set Button to confirm.
  • Flash Exposure Bracketing (FEB): Takes three shots with different exposures (normal, over, under) in 1/3rd stop increments from -3 to +3. Press Function Button 3 <FEB>, turn the Select Dial, and press Set Button to confirm.
  • Flash Exposure Lock (FEL): Locks the correct flash exposure setting for any part of the scene. With <ETTL> displayed, press the camera's <FEL> button (or <*> button if FEL is not available).
  • High-Speed Sync (HSS): Enables flash synchronization with all camera shutter speeds (up to 1/8000s). Press Function Button 2 <SYNC> to activate.
  • Second-Curtain Sync: Creates a light trail following the subject with slow shutter speeds. Press Function Button 2 <SYNC> to activate.

2. Manual Flash (M) Mode

The flash output is adjustable from 1/1 full power to 1/256th power in 1/10th stop increments. Use a hand-held flash meter for correct exposure.

  1. Press <MODE> button until <M> is displayed.
  2. Turn the Select Dial to choose a desired flash output amount.
  3. Press Set Button to confirm.

Optic S1/S2 Secondary Unit Setting:

In M manual flash mode, press the <S1/S2> button to enable optic triggering.

  • S1 Mode: The flash functions as an optic S1 secondary flash with an optic sensor. It fires synchronously when the main flash fires.
  • S2 Mode: The flash functions as an optic S2 secondary flash. It ignores a single "preflash" from the main flash and only fires in response to the second, actual flash from the main unit, useful with cameras that have pre-flash function.

3. Multi Flash (Stroboscopic) Mode

With stroboscopic flash, a rapid series of flashes is fired to capture multiple images of a moving subject in a single photograph. You can set the firing frequency (Hz), number of flashes, and flash output.

  1. Press <MODE> button until <MULTI> is displayed.
  2. Set the flash frequency and flash times using Function Buttons 2 (<Times>) and 3 (<Hz>) and the Select Dial.
  3. Turn the Select Dial to choose a desired flash output.
  4. Press Set Button to confirm.

Note: To avoid overheating, do not use stroboscopic flash more than 10 times in succession. Allow at least 15 minutes rest after 10 uses.

Image demonstrating TCM Instant Conversion, showing how exposure can be adjusted in steps from original output.
Figure: TCM Instant Conversion for quick TTL to Manual adjustment.

4. Wireless Flash Shooting: Radio (2.4G) Transmission

The TT685II features a built-in Godox 2.4G wireless X system for seamless connectivity. It can function as a transmitter unit (attached to camera) or a receiver unit (wirelessly controlled).

Image showing the Godox TT685II flash with a Godox XProS wireless flash trigger, highlighting the 2.4G Wireless X System.
Figure: Godox 2.4G Wireless X System in action.

Wireless Settings:

  • Wireless Selection: Press the < > button to switch between normal flash and wireless flash. Set to OFF for normal flash.
  • Setting Communication Channel: To prevent signal interference, change the channel IDs. Transmitter and Receiver units must be set to the same channel (1-32). Press <MENU> to enter C.Fn CH setting, turn Select Dial, and press Set Button.
  • Wireless ID Settings: Change wireless channels and IDs to avoid interference. Transmitter and Receiver units must have the same ID (01-99). Press <MENU> to enter C.Fn ID, choose a figure from 01 to 99.
  • Scan the Spare Channel: Use the SCAN option in C.Fn settings to find spare channels (1% to 100% scan).
  • Transmitter Unit's Flash OFF: When set to OFF, only receiver units will fire. Press <MENU> to enter C.Fn Transmitter setting.

Wireless Flash Shooting Examples:

  • ETTL Fully Automatic Wireless Flash Shooting: Set the transmitter unit to <ETTL>. Receiver units will automatically be set to <ETTL>.
  • Wireless Multiple Flash Shooting: Divide receiver units into two or three groups (A/B/C/D/E) and perform E-TTL II autoflash while changing the flash ratio. Each group can also have a different flash mode.
  • M Wireless Flash Shooting: Set the transmitter unit to <M>. Set different flash outputs for each receiver unit group.
  • Multi Wireless Flash Shooting: Set the transmitter unit to <MULTI>. Set stroboscopic flash parameters for each receiver unit group.
Diagram illustrating the Godox TT685II functioning as both a transmitter and receiver flash, showing its flexibility in co-working with other flashes.
Figure: Transmitter & Receiver Flash Setup.

5. Other Applications

  • Sync Triggering: The 2.5mm sync cord jack allows connection to a trigger plug for synchronous flash with the camera shutter.
  • Auto Focus Assist Beam: In low-light or low-contrast conditions, the built-in AF assist beam automatically lights up to aid autofocus. It turns off once focus is achieved. Can be turned off in C.Fn settings ("AF" to "OFF").
  • Bounce Flash: Point the flash head towards a wall or ceiling to bounce light, softening shadows for a more natural look. The flash head has a broader tilt angle from -7° to 120° and is rotatable in 330°.
  • ZOOM: Setting the Flash Coverage: The flash coverage can be set automatically or manually (20-200mm) to match the lens focal length.
  • Creating a Catchlight: Use the built-in catchlight panel by pointing the flash head upward by 90°, pulling out the wide panel, and then pushing the wide panel back in partially.
Diagram illustrating the broader bounce angle of the Godox TT685II flash head, adjustable from -7 to 120 degrees tilt and 330 degrees rotation.
Figure: Broader Bounce Angle for flexible lighting.

Maintenance

  • Shut down the device immediately if abnormal operation is detected.
  • Avoid sudden impacts and dedust the product regularly.
  • It is normal for the flash tube to be warm when in use. Avoid continuous flashes unnecessarily.
  • Maintenance of the flash must be performed by an authorized maintenance department which can provide original accessories.
  • If the product had failures or was wetted, do not use it until it is repaired by professionals.
  • Changes made to the specifications or designs may not be reflected in this manual.

Troubleshooting

If you encounter problems, refer to this guide for solutions:

The Camera Flash does not fire.

  • Issue: The camera flash is not attached securely to the camera.
  • Solution: Attach the camera's mounting foot securely.
  • Issue: The electrical contacts of the Camera Flash and camera are dirty.
  • Solution: Clean the contacts.
  • Issue: < > or < > is not displayed in the viewfinder.
  • Solution: Wait until the flash is fully recycled and the flash ready indicator lights up. If it still doesn't light up after a long wait, check battery power and replace if low.

The power turns off by itself.

  • Issue: Auto power off took effect (90 seconds idle as Transmitter, 60/30 minutes idle as Receiver).
  • Solution: Press the shutter button halfway or press any flash button to wake up.

Auto zoom does not work.

  • Issue: The camera flash is not attached securely to the camera.
  • Solution: Attach the camera's mounting foot securely.

The flash exposure is underexposed or overexposed.

  • Issue: There was a highly reflective object (e.g., glass window) in the picture.
  • Solution: Use FE lock (FEL).
  • Issue: You used high-speed sync.
  • Solution: With high-speed sync, the effective flash range will be shorter. Ensure the subject is within the effective flash range.
  • Issue: You used Manual Flash mode.
  • Solution: Set the flash mode to ETTL or modify the flash output.

Photos have dark corners or only parts of the target subject are illuminated.

  • Issue: The focal length of the lens exceeds the flash coverage.
  • Solution: Check the flash coverage you set. This flash unit has a flash coverage between 20 and 200mm, which fits medium-format cameras.

Over-Temperature Protection

To prevent overheating, the flash unit has a protection function. If the flash head gets too hot, the unit may temporarily stop firing. Allow it to cool down for at least 10 minutes.

Number of Flashes to Activate Over-Temperature Protection (1/1 Power Output Level)
ZOOM (mm)20242835507080105135200
Flashes40505060607070808080

Specifications

FeatureSpecification
ModelTT685II
Compatible CamerasCanon EOS cameras (E-TTL II autoflash)
Guide No. (1/1 output, 200mm)GN60 (m ISO100)
Flash Coverage20 to 200mm (Auto zoom, Manual zoom)
Flash Duration1/300 to 1/20000 seconds
Exposure Control SystemE-TTL II autoflash and manual flash
Flash Exposure Compensation (FEC)Manual, FEB: ±3 stops in 1/3 stop increments
FE LockWith <FEL> button or <*> button
Sync ModeHigh-speed sync (up to 1/8000s), first-curtain sync, and second-curtain sync
Multi FlashProvided (up to 100 times, 199Hz)
Wireless Flash FunctionTransmitter, Receiver, Off
Transmitter GroupsA, B, C, D
Controllable Receiver GroupsA, B, C, D, E (E group can be controlled by X series flash trigger)
Transmission Range (approx.)100m
Channels32 (1-32)
ID01-99
Modeling FlashFired with camera's depth-of-field preview button
Auto Focus Assist Beam Effective RangeCenter: 0.6-10m, Periphery: 0.6-5m
Power SourceNi-MH battery (recommended) or LR6 alkaline battery*4
Recycle Time0.1-2.6s (Rechargeable Ni-MH Battery)
Full Power FlashesAbout 290 times
Power SavingAuto power off after approx. 90 seconds of idle operation (60 minutes if set as Receiver)
Sync Triggering ModeHotshoe, 2.5mm sync line
Working Temperature-10°C to 50°C
Dimensions (WxHxD)64*76*190 mm
Weight without battery405g
Weight with battery489g
2.4G Frequency Range2413.0MHz-2465.0MHz
Max. Transmitting Power5dbm

Note: This table only lists currently tested camera models. For compatibility with other camera models, a self-test is recommended. Godox retains the right to modify this table.

User Tips & FAQ

User Tips:

  • The TT685II-N (Nikon version) works correctly and has good build quality.
  • The flash performs as expected, and some users received additional gifts from the seller.
  • The flash is compatible with various camera brands like Canon, Nikon, Sony, Fuji, and Olympus.

Frequently Asked Questions:

  • Is it compatible with Canon Rebel T100 without a central pin?
    The TT685II-C is designed for Canon EOS cameras and is compatible with E-TTL II autoflash. Compatibility with specific models like the Rebel T100 without a central pin should be verified with the camera manufacturer's specifications or by performing a self-test.
  • Is it compatible with EOS RP?
    The TT685II-C is compatible with Canon EOS series cameras. For specific mirrorless models like the EOS RP, it is generally compatible, but a self-test is recommended to ensure full functionality.

Warranty & Support

Warranty Period:

The warranty period for products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the purchase date when the product is bought for the first time, and the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get Maintenance Service:

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Non-Warranty Situations:

The warranty and services described in this document will not apply if:

  • The product or component exceeds its warranty period.
  • Malfunction or damage caused by improper use, maintenance, or storage (e.g., improper handling, use not as intended, improper connection of external equipment, drops, external force, contact with improper temperature, solvents, acids, water immersion, or damp environments).
  • Malfunction or damage caused by installation, repair, modification, addition, or disassembly by non-Godox authorized institutions or personnel.
  • Original identification information of the product or component has been altered or removed.
  • No valid warranty card.
  • Malfunction or damage caused by the use of unauthorized, non-standard, or non-publicly released software.
  • Malfunction or damage caused by force majeure or accident.
  • Other malfunctions or damages not caused by the quality of the product itself.

In such cases, you should seek solutions from the relevant responsible party, and Godox will not bear any responsibility. Malfunctions caused by non-warranty parts, accessories, or software are not covered by the warranty. Normal discoloration, wear, and consumption during product use are not covered by the warranty.

Contact Information:

Godox After-sale Service Call: 0755-29609320-8062

For a PDF version of the user manual, please refer to the official document: Godox TT685II User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.