ZTree Solar Stainless Steel Garden Lights

Contents

ZTree Solar Stainless Steel Garden Lights User Manual

Model: Solar Stainless Steel Garden Lights

1. Introduction

Thank you for choosing ZTree Solar Stainless Steel Garden Lights. These lights are designed to provide efficient and aesthetically pleasing illumination for your outdoor spaces, utilizing solar power for automatic operation. Please read this manual carefully before installation and use to ensure optimal performance and safety.

For more detailed information and specific documents, you may refer to the official user manual PDF: View User Manual (PDF).

2. Safety Information

▲ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

  • It is prohibited to soak the lamp body in water (such as ponds or water accumulation pits). Although it has waterproof function, prolonged deep water immersion may cause internal water ingress and short circuit.
  • During installation and maintenance, avoid touching the surface of the LED light source due to high temperatures during operation to prevent burns.
  • It is prohibited to disassemble the lamp body, solar panel, or lithium battery by yourself to avoid damaging the internal circuit or causing safety hazards.
  • Children should install or approach under adult supervision to avoid scratching the tip of the ground insertion rod.
  • Not suitable for indoor use; only suitable for outdoor environments.
  • Avoid installation in high temperature environments (such as near heating or stoves) or flammable and explosive areas.
  • In case of extreme weather such as rainstorm and typhoon, it is recommended to temporarily remove the lamp body and reinstall it after the weather improves to avoid equipment damage.

3. Product Features

  • Light Sensing Automatic Control: The lights automatically charge during the day, turn on at dusk, and turn off at dawn, requiring no manual operation.
  • Strong Waterproof Rating: With an IP65 protection level, these lights can withstand rain, splashes, and adapt to complex outdoor weather conditions.
  • Efficient and Energy-Saving: The solar panels have a conversion rate of ≥18%, providing continuous illumination for 8-12 hours on a single full charge, depending on lighting conditions and brightness mode.
  • Durable Construction: Made from stainless steel for longevity and resistance to outdoor elements.
  • Integrated LED Bulbs: Comes with included LED bulbs that are dimmable.
IP65 Strong Waterproof Rating
Figure 1: Demonstrates the IP65 strong waterproof rating, suitable for various weather conditions including rain, thunderbolt, and snow.
Smart Light Control Day and Night
Figure 2: Illustration of smart light control, showing automatic charging during the day and automatic illumination at night.

4. Installation

4.1. Pre-Installation Check

  1. Open the packaging and check if all components are complete and undamaged.
  2. Ensure connections between the lamp body, solar panel, and ground rod are secure.

4.2. Choosing an Installation Location

  • Ensure the solar panel can fully receive direct sunlight for at least 6 hours per day.
  • Avoid locations where the solar panel might be blocked by trees, buildings, sunshades, etc.
  • Stay away from strong light sources (such as street lights, courtyard lights) to prevent interference with the light sensing sensor's operation.

4.3. Fixed Installation Steps

  1. For Soft Ground (Lawn or Soil): Insert the ground pole vertically into the lawn or soil with a depth of at least 20cm to ensure the lamp body is stable and not shaking.
  2. For Hard Ground (Stone Pavement or Cement): First, drill a hole with a diameter matching the ground rod. Insert an expansion pipe, then insert and fix the ground rod to avoid tipping.
  3. Align the ground plug rod with the installation interface at the bottom of the lamp body. Rotate it clockwise and tighten it (or press it into place according to the buckle design), ensuring a firm connection without looseness.

4.4. Initial Setup

  1. Locate the power switch on the side or bottom of the lamp body and turn it to the "ON" position (some models may have an "Auto" mode, which means automatic operation).
  2. Tear off the protective film on the surface of the solar panel to ensure it can receive sunlight normally.
Installation Instructions Diagram with Dimensions
Figure 3: Installation instructions showing components and assembly steps. Dimensions: Solar panel diameter 40.5mm, lamp diameter 61mm, total height 430mm.

5. Operating Instructions

The ZTree Solar Garden Lights are designed for automatic operation. Once installed and the power switch is set to "ON" or "Auto", the lights will function as follows:

  • Daytime: The integrated solar panel will automatically charge the internal battery using sunlight.
  • Dusk: As ambient light levels decrease, the light sensing sensor will detect darkness, and the lights will automatically turn on.
  • Dawn: As ambient light levels increase with the rising sun, the lights will automatically turn off and begin charging again.

Ensure the solar panel is clean and free from obstructions to maintain optimal charging efficiency.

6. Maintenance

  • Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures maximum charging efficiency.
  • Inspection: Periodically check the physical condition of the lights, including the lamp body, solar panel, and ground rod, for any signs of damage or looseness.
  • Weather Precautions: As mentioned in the safety information, during extreme weather conditions like heavy rainstorms or typhoons, it is advisable to temporarily remove the lights to prevent damage. Reinstall them once the weather improves.
  • Battery Care: The integrated lithium-ion battery is designed for long-term use. Avoid disassembling the unit, as this can damage the battery and internal circuits.

7. Troubleshooting

  • Light Does Not Turn On at Night:
    • Ensure the power switch is in the "ON" or "Auto" position.
    • Verify the solar panel is receiving at least 6 hours of direct sunlight daily. Relocate if necessary.
    • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
    • Ensure there are no strong light sources nearby that might interfere with the light sensor.
  • Light Illuminates for a Short Period:
    • The battery may not be fully charged. Ensure the solar panel receives adequate direct sunlight for a full day.
    • Ambient temperature can affect battery performance. In colder weather, illumination time might be reduced.
    • Clean the solar panel to maximize charging efficiency.

8. Specifications

Attribute Value
Brand Name ZTree
Item Type Lawn Lamps
Power Source Solar
Light Source LED bulbs
Is Bulbs Included Yes
Is Dimmable Yes
Body Material Stainless steel
Protection Level IP65
Luminous Flux 249-2000
Voltage 0-5V
Installation Method Self-contained (ground stake)
Usage HOLIDAY (suitable for various outdoor decorations)
Style Modern Style
Certification UL, CE
Origin Mainland China
High-concerned chemical None
Package Length 7 cm
Package Width 7 cm
Package Height 31 cm
Package Weight 1.92 kg
Product Diameter 61 mm
Product Height 430 mm

9. User Tips

  • Check Package Contents: When receiving your order, carefully check the number of lights included in your package against your order details, especially if you purchased a multi-pack (e.g., 1PCS, 2PCS, 4PCS, 6PCS, 8PCS).
  • Optimal Sun Exposure: For best performance, ensure the solar panels are placed in an area that receives maximum direct sunlight throughout the day. Even partial shade can significantly reduce charging efficiency and illumination time.
  • Regular Cleaning: Keep the solar panels clean from dust, leaves, and snow. A clean panel absorbs more sunlight, leading to longer and brighter illumination.
  • Environmental Friendliness: These solar-powered lights are an environmentally friendly choice, reducing electricity consumption and carbon footprint.
  • Stylish Enhancement: The modern design and various light options (Silver Warm, Black Warm, Silver White, Black White) can add a stylish and elegant touch to your garden, pathway, patio, or lawn.

10. Certifications

  • CE Certification: This product bears the CE mark, signifying that it meets the safety requirements stipulated by EU directives and is suitable for markets in the European Union and European Free Trade Area countries.
  • UKCA Mark: The UKCA mark indicates product conformity assessment for goods placed on the market in the UK (England, Wales, and Scotland) after Brexit.
  • UL Certification: This product is also UL certified, indicating compliance with safety standards.

11. Warranty and Support

For any issues, questions, or support needs regarding your ZTree Solar Stainless Steel Garden Lights, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.

Additional support and detailed instructions can be found in the comprehensive user manual PDF: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.