Reilyn P625

Contents

Reilyn P625 23Ga Pneumatic Pin Nailer User Manual

Model: P625

1. Introduction

Thank you for choosing the Reilyn P625 23Ga Pneumatic Pin Nailer. This tool is designed for precision fastening in commercial manufacturing applications, such as baseboards, wardrobe decoration, nail wood frames, sofa making, and shoe making. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pin nailer. Please read this manual thoroughly before use and keep it for future reference.

2. Safety Information

WARNING: Failure to follow these safety instructions could result in DEATH or SERIOUS INJURY.

  • Read and understand all tool labels and this manual before operation.
  • Always wear safety glasses with side shields when operating the tool and when in the work area.
  • NEVER point the tool at yourself or others in the work area.
  • Ensure the air supply is disconnected before performing any maintenance, clearing jams, or loading/unloading fasteners.
  • Keep hands and body parts clear of the discharge area of the tool.
Warning label on Reilyn P625 Pin Nailer
Warning label on the tool, emphasizing the importance of reading the manual and wearing safety glasses.

3. Product Overview

The Reilyn P625 is a lightweight and powerful pneumatic pin nailer designed for delicate and precise fastening tasks. It features a durable construction and an ergonomic design for comfortable use.

3.1. Components

  • Main Body: Durable housing for internal mechanisms.
  • Magazine: Holds pin nails.
  • Trigger: Activates the nailing mechanism.
  • Air Inlet: Connection point for the air hose (available in US, EU, JP variants).
  • Magazine Release Latch: Used to open and close the magazine for loading.
  • Spring Buffer: Designed to prevent accidental firing.
Reilyn P625 Pneumatic Pin Nailer with nails
The Reilyn P625 Pneumatic Pin Nailer, showing the main body, magazine, and included nails.
Side view of Reilyn P625 Pin Nailer
Side view of the Reilyn P625, highlighting the ergonomic grip and air inlet.

3.2. Product Video

Watch this video for a visual demonstration of the Reilyn P625 Pin Nailer's features and operation.

Official product video demonstrating the Reilyn P625 Headless Pin Nailer, including nail loading and firing.

4. Specifications

FeatureSpecification
Brand NameReilyn
Model NumberP625
TypeOther (Pneumatic Pin Nailer)
UseCommercial Manufacture
OriginMainland China
CertificationCE
Wire Size23Ga (0.63mm)
Nail TypePin Nails (Headless)
Nail Length10-25mm (2/5-1 inch)
Magazine Capacity100 pcs (as per product description) / 130 pcs (as per video)
Operating Pressure60-100 PSI (4-7 bar)
Air Inlet1/4" N.P.T.
Fitting Tube6mm
Dimensions (L x H)218mm x 160mm (approx.)
Weight0.85kg - 0.88kg (1.87 - 1.94 lbs)
Detailed specifications of Reilyn P625 Pin Nailer
Detailed specifications including capacity, staple length, fastener size, operation pressure, air inlet, fitting tube, and weight.
Dimensions of Reilyn P625 Pin Nailer
Diagram showing the dimensions of the Reilyn P625 Pin Nailer: 160mm height and 218mm length.

5. Setup

5.1. Connecting to Air Supply

  1. Ensure the air compressor is off and depressurized.
  2. Attach a 6mm fitting tube to the 1/4" N.P.T. air inlet on the nailer.
  3. Connect the other end of the fitting tube to your air compressor.
  4. Set the air compressor pressure between 60-100 PSI (4-7 bar). Do not exceed the maximum operating pressure.
Reilyn P625 Pin Nailer with air inlet connector
The Reilyn P625 Pin Nailer with an AP Male air inlet connector, ready for air hose attachment.

5.2. Loading Nails

  1. Disconnect the air supply from the nailer for safety.
  2. Hold down the magazine release latch.
  3. Pull out the magazine.
  4. Insert the 23Ga pin nails (10-25mm length) into the magazine. Ensure the nails are headless for proper operation.
  5. Close the magazine by pushing it back until the magazine release latch clicks into place.
Nailing procedure for Reilyn P625 Pin Nailer
Diagram illustrating the nailing procedure: holding down the magazine release latch to pull out the magazine, inserting nails, and then closing the magazine.

6. Operation

  1. Ensure the air supply is connected and the pressure is set correctly (60-100 PSI).
  2. Hold the nailer firmly against the workpiece.
  3. Press the trigger to drive a pin nail. The tool features strong penetration and smooth nail delivery.
  4. Release the trigger after each nail.
Reilyn P625 Pin Nailer in use
The Reilyn P625 Pin Nailer being used to fasten a wooden piece, demonstrating its strong, stable, and smooth working action.

6.1. Application Occasions

The Reilyn P625 Pin Nailer is suitable for various applications:

  • Wardrobe decoration
  • Nail wood frames
  • Making sofas
  • Making shoes
Application occasions for Reilyn P625 Pin Nailer
Visual examples of the Reilyn P625 Pin Nailer's applications, including wardrobe decoration, nail wood frames, sofa making, and shoe making.

7. Maintenance

  • Regularly check the air inlet and connections for leaks.
  • Keep the tool clean and free from dust and debris.
  • Apply a few drops of pneumatic tool oil to the air inlet before each use to lubricate internal components.
  • Store the tool in a dry, clean environment when not in use.

8. Troubleshooting

8.1. Common Issues and Solutions

ProblemPossible CauseSolution
Nailer not firing or weak firingLow air pressure; Air leak; No nails in magazine; Incorrect nail size/type.Check air compressor pressure (60-100 PSI); Inspect air connections; Load more nails; Ensure 23Ga headless pin nails are used.
Nails jammingIncorrect nail size/type; Damaged nails; Debris in magazine.Use correct 23Ga headless pin nails; Replace bent or damaged nails; Disconnect air, clear debris from magazine.
Air leaking from toolLoose fittings; Damaged O-rings/seals.Tighten all air fittings; Inspect and replace worn O-rings/seals if necessary.

9. User Tips

  • This nailer is excellent for small pieces of wood and delicate work where minimal nail visibility is desired.
  • For optimal performance, ensure you are using headless pin nails. Nails with heads can cause the tool to jam.
  • The tool is high-quality and works perfectly when used with the correct fasteners and air pressure.

10. Warranty and Support

10.1. Warranty and Compensation

  • If the product received is broken or defective, please notify us within 3 days of receipt. We will discuss a refund or replacement of goods.
  • If the product is returned used or artificially damaged, we bear no responsibility to replace or refund.

10.2. Feedback

We value your feedback. If you have any positive feedback, we would be very glad to hear it. If you encounter any problems during the use of the product, please let us know as soon as possible, and we will endeavor to resolve it at our earliest convenience.

For further assistance, you may refer to the official user manual PDF: View User Manual (PDF)

11. Frequently Asked Questions (FAQ)

Q: What is the usage of this product?
A: It is primarily used for commercial manufacturing applications, such as finishing work on baseboards, decorative elements, and furniture assembly.
Q: Where can I buy 0.63mm nails for this tool?
A: 0.63mm (23Ga) pin nails can typically be purchased from specialized hardware stores or various online retailers that stock pneumatic tool supplies.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.