1. Safety Information & Warnings
WARNING: BE CAREFUL OF HIGH TEMPERATURE!
- Always turn off the power supply before installation, maintenance, or bulb replacement.
- Ensure the power supply voltage is AC 12V. Using an incorrect voltage will cause the light to be dim or fail.
- Do not touch the halogen light bulb when it is working or immediately after it has been switched off, as it will be extremely hot. Allow sufficient time for cooling.
- This product is designed for indoor use in dry locations.
2. Product Overview
The LIDESENS LDS-CL-68S is a 20W G4 Halogen Puck Light designed for various accent and task lighting applications. It provides warm white illumination, ideal for enhancing the ambiance and visibility in cabinets, shelves, showcases, and other enclosed spaces.
3. Specifications
| Feature | Detail |
|---|---|
| Product Name | Cabinet Light |
| Model | LDS-CL-68S |
| Light Type | Halogen bulb (G4) |
| Power | 20W |
| Voltage | AC 12V |
| Color Temperature | Warm White (2700-3500K) |
| Overall Size | Φ68mm x 25mm (2.68in x 0.98in) |
| Cutout Hole Diameter | Φ60-65mm (2.36-2.56in) |
| Bulbs Included | Yes |
| Power Source | AC |
| Origin | Mainland China |
| Certification | SAA, PSE, CE |
4. Installation
- Prepare the Installation Area: Ensure the power supply to the installation area is completely turned off at the circuit breaker.
- Check Voltage: Verify that your power supply is AC 12V. Incorrect voltage will damage the light or cause it to operate improperly.
- Create Cutout: Drill a hole with a diameter of 60-65mm (approximately 2.36-2.56 inches) in the desired mounting surface. A 65mm (2.50in) hole is recommended for a snug fit.
- Connect Wiring: Connect the puck light's wiring to your AC 12V power source. Ensure connections are secure and insulated.
- Insert Light: Gently push the puck light into the cutout hole. The spring clips on the sides of the light will secure it in place.
- Restore Power: Once the light is securely installed and wired, restore power to the circuit.
5. Operation
Once installed and powered, the LIDESENS G4 Halogen Puck Light will illuminate, providing a warm white light. Operation is typically controlled by the switch connected to your 12V AC power supply.
6. Maintenance
- Cleaning: To clean the light fixture, ensure the power is off and the light has cooled completely. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement:
- Turn off the power supply to the fixture.
- Allow the bulb to cool down completely.
- Carefully remove the retaining ring (if present) and then the old G4 halogen bulb.
- Insert a new 20W G4 12V AC halogen bulb. Avoid touching the new bulb directly with bare hands, as oils can reduce bulb life. Use a cloth or glove.
- Reattach the retaining ring and restore power.
- General Care: Regularly check wiring for any signs of wear or damage.
7. Troubleshooting & FAQ
Troubleshooting:
- Light is dim or does not turn on:
- Ensure the power supply is AC 12V. Incorrect voltage is a common cause for dimness or failure.
- Check all wiring connections for looseness or damage.
- Verify the bulb is correctly seated and not burnt out.
Frequently Asked Questions (FAQ):
- What is the required hole diameter for installation?
The recommended cutout hole diameter is between 60-65mm (2.36-2.56 inches). A 65mm (2.50in) hole provides a good fit.
8. User Tips
- These lights are known for their durability and heat-resistant glass, making them suitable for demanding environments like ovens and campers.
- Installation is generally straightforward and easy.
- The product often includes short extension cables (approx. 11 cm) which can be useful for flexible placement during installation.
- Many users prefer these halogen lights over LEDs for specific applications due to their light spectrum, which includes infrared rays.
- They can serve as excellent replacements for worn-out recessed spotlights in various fixtures, such as range hoods.
9. Warranty and Support
For any questions or support regarding your LIDESENS G4 Halogen Puck Light, please contact our customer service:
- Email: sales@lidesens.com
- Whatsapp: +0086-18033449799
A digital version of this user manual is available in PDF format for your convenience. You can access it via the following link: User Manual (PDF)