1. Introduction
The ONWA KP-27A is a 7-inch Color LCD GPS Chart Plotter designed for marine navigation. It features a built-in Class B+ AIS Transponder and comes with a GPS antenna. This device combines advanced GPS charting capabilities with Automatic Identification System (AIS) functionality, providing comprehensive navigation and collision avoidance information.
The KP-27A is compatible with various mapping systems including K-Chart, C-Map Max, and Navionics+. It also includes a built-in HD Fish Finder feature (requires transducer, sold separately) for enhanced fishing capabilities.
This image shows the main unit of the KP-27A, highlighting its 7-inch color LCD screen and control buttons.
The package includes the main KP-27A unit, GPS antenna, power/data cables, mounting bracket, and user manual.
2. Setup Instructions
2.1. Package Contents
Before installation, please verify that all items are present in the package:
- KP-27A Main Display Unit
- Mounting Bracket
- GPS Patch Antenna with 4m cable (SMA connector), Ingress Protection IP66
- Power/Data Cable
- Quick Start Manual
- Mounting Hardware (screws)
2.2. Optional Accessories
The following accessories are not included in the standard package and may be required for full functionality:
- AIS Antenna (for KP-25A, KP-25X, KP-27A, KP-27X)
- External GPS Antenna (KA-07 / KA-GC9A)
- Fishfinder Transducer (for KP-25F, KP-25X, KP-27F, KP-27X)
- Heading Sensor E-Compass (KA-GC9A, RS422 Connection)
- Transom Mount Transducer (KTD-520_TM, 600W)
- Bronze Thru-hull Transducer (600W)
- Plastic Thru-hull Transducer (600W)
- Transom Mount Temperature Probe (KTS-10K_TM)
- Thru-Hull Temperature Probe (KTS-10K_TH)
2.3. Interconnection Diagram
Refer to the diagram below for proper wiring and connection of the KP-27A unit with various marine electronics. Ensure all connections are secure and waterproof where necessary.
The diagram illustrates how to connect the AIS Antenna (optional), External GPS Antenna (optional), N2K network, Radar/VDR/ECDIS, and Fishfinder Transducer (optional) to the main KP-27A unit. The power input is 10.5 to 35 VDC.
2.4. Physical Dimensions
Consider the dimensions of the unit for mounting. The KP-27 series units have the following approximate dimensions:
The diagram provides detailed measurements for the KP-27 series, including width, height, and depth, crucial for installation planning.
3. Operating Instructions
3.1. Turning On and Off
To turn on the unit, press the POWER key. The unit will beep and display the "ONWA" logo. Wait for the unit to fully boot up and display the warning page. Press the CHECKMARK key to accept the warning and enter working mode.
To turn off the unit, press and hold the POWER key until the screen goes off.
3.2. Basic Controls
The KP-27A features a set of buttons and a directional pad for navigation and control:
This image shows the main control panel of the KP-27A, including the directional pad, menu, mode, power, and function keys.
- Directional Pad (Up/Down/Left/Right):
- Chartplotter function: Move cursor or change settings.
- Move cursor to the left/right.
- MENU Key:
- Press once to display the menu of the current page.
- Press twice to enter the main menu (for Chartplotter, press three times).
- MODE Key: Exit current operation or display screen display mode selection.
- CHECKMARK Key: Confirm selection or enter data.
- X Key:
- Short Press: Call out AIS detail list.
- Long Press: The MOB mark denotes man overboard position.
- fx Key:
- Chartplotter and AIS Function: Enlarges the scale of maps and charts.
- Chartplotter and AIS Function: Reduces the scale of maps and charts.
- O/∗ Key:
- Long Press: Turn the power ON/OFF.
- Short Press: Adjust screen brightness and control panel dimmer.
3.3. Brightness and Day/Night Mode
To adjust brightness:
- Short press the O/∗ key. The adjusting window will appear.
- Use the UP or DOWN arrow keys to adjust LCD display brightness.
- Use the LEFT or RIGHT arrow keys to adjust keypad backlight.
- Press the CHECKMARK key to confirm and exit.
To switch between day and night display mode, press the fx key while in the brightness adjustment screen.
3.4. Selecting Display Modes
To select a display mode:
- Press the MODE or O/∗ key. An icon selection window will appear.
- Use the arrow keys to choose a desired display mode.
- Press the CHECKMARK key to enter the selected display mode.
- You can also press the X key to quit without changing the display mode.
This screen allows users to quickly switch between different views such as chart plotter, compass, wind data, navigation data, satellite information, highway view, AIS, fish finder, and combined plotter/fish finder views.
Examples of different display modes are shown, such as Plotter, Navigation Data, Compass, Highway, Sounder, Sounder + Plotter, AIS, Wind, and Satellite, each with day and night variations for optimal visibility.
3.5. AIS Features
The KP-27A includes a built-in Class B+ AIS Transponder for enhanced safety and situational awareness.
This diagram explains Class B+ AIS Technology, including SOTDMA, 5W Transmission Power, and Increased Transmission Rate for global tracking. It also highlights exactTrax Tracking for monitoring fishing boats and small commercial vessels.
- AIS Targets Overlay: Targets are overlaid on the plotter screen, showing nearby AIS vessels. Pointing the cursor at a target displays its MMSI number and location. Selecting the target shows detailed ship information.
- AIS Target Tracking: The KP-27A can record tracks of AIS targets. Manually selected AIS targets (up to 10) can be saved. Recorded tracks are useful for reviewing past movements and can be saved as a route.
- CPA and TCPA Alarm: An alarm system warns the user of nearby vessels stating possible Closest Point of Approach (CPA) and Time to Closest Point of Approach (TCPA). The alarm unit remains active until acknowledged.
- Vessel List: Displays nearby vessels, their distance to your vessel, and other relevant information. Selecting a target from the list shows detailed vessel information.
This image demonstrates how AIS targets appear on the chart plotter, allowing users to identify vessels and access their details by selecting them.
The image shows how the KP-27A can record and display tracks of AIS targets, which can then be saved as routes for future reference.
This image illustrates the CPA/TCPA alarm warning and the vessel list, providing critical information for collision avoidance and vessel identification.
3.6. Built-in HD Fish Finder (Optional Transducer Required)
The KP-27A applies advanced Digital Fish Finder Technology with dual frequency (50 and 200kHz, alternately transmitted). It features automatic range and gain adjustment depending on usage (cruising or fishing).
The display shows excellent sea-bed discrimination and the ability to easily identify fish and schools of fish, indicating exact depth for fishing.
3.7. Zoom Modes (Fish Finder)
The fish finder offers various zoom modes for detailed viewing:
- Marker Zoom: The marker area is zoomed and displayed on the left side of the screen.
- Bottom Lock Zoom: Zooms in on the bottom structure.
- Bottom Zoom: Provides a magnified view of the bottom.
This image illustrates the different zoom functionalities available for the fish finder, allowing users to focus on specific areas of interest.
3.8. Alarms
The unit supports various alarms to alert the user to important conditions:
- Fish Alarm: Alarms when fish are detected at a set range.
- Bottom Alarm: Alarms when the set bottom range is reached.
- Temperature Alarm: Used to warn the user when water temperature reaches a set range (requires temperature sensor).
- CPA/TCPA Alarm: Alerts to potential collision risks with other vessels.
This image details the alarm types and lists optional accessories like various transducers and temperature probes.
4. Maintenance
To ensure the longevity and optimal performance of your ONWA KP-27A, follow these general maintenance guidelines:
- Cleaning: Regularly clean the display screen and unit exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the screen or casing.
- Connections: Periodically check all cable connections (power, GPS antenna, AIS antenna, transducers) to ensure they are secure and free from corrosion.
- Software Updates: Keep the unit's software updated using an SD card. Refer to the full manual for detailed instructions on performing software updates.
- Storage: When not in use for extended periods, especially in harsh conditions, consider using the protective cover (if available) and storing the unit in a dry, temperate environment.
5. Troubleshooting
This section provides solutions to common issues you might encounter with your KP-27A unit.
5.1. Common Issues and Solutions
- Display Mode Icons are Greyed Out:
- Problem: Some display mode icons appear greyed out and cannot be selected.
- Solution: This indicates that the specific display mode might be turned off in the SETUP menu. Navigate to the SETUP menu and ensure the desired display mode is enabled.
- Fishfinder Function Not Available:
- Problem: The Fishfinder function or Plotter/Fish mode cannot be selected.
- Solution: The Fishfinder function is not available on KP-27A models unless a compatible transducer is connected and enabled. Ensure you have the correct model (KP-27F or KP-27X) or have installed an optional transducer.
- No GPS Position:
- Problem: The unit is not acquiring a GPS position or showing incorrect coordinates.
- Solution: Ensure the GPS Patch Antenna is properly connected and has a clear, unobstructed view of the sky. Check the antenna cable for damage. Verify GPS settings in the menu.
- AIS Targets Not Displaying:
- Problem: AIS targets are not appearing on the chart plotter.
- Solution: Ensure the AIS antenna is correctly installed and connected. Check AIS settings in the menu. Verify that there are active AIS-equipped vessels within range.
6. Specifications
Below are the key specifications for the ONWA KP-27A GPS Chart Plotter:
| Feature | Specification |
|---|---|
| Model | KP-27A |
| Display Size | 7-inch Color LCD |
| Screen Resolution | 800x480 (WVGA) |
| LCD Brightness | 1000 nit (Sunlight Viewable) |
| GNSS Support | GPS + Beidou + Galileo + Glonass |
| GPS Receiver Channels | 50 parallel channel GNSS receiver |
| GPS Acquisition Time | Cold start: 29 seconds, Hot start: 1 second |
| GPS Update Rate | 1 second |
| GPS Position Accuracy | 3 meters (95%) without S/A |
| Velocity Accuracy | 0.1 meter/sec without S/A |
| Built-in AIS Transponder | Class B+ (SOTDMA Technology, 5W TX Power) |
| Mapping System Compatibility | K-Chart (Free), C-Map Max, Navionics+ |
| NMEA Interface | NMEA0183, NMEA2000 |
| Power Supply | 10.5 to 35VDC, current drain <1.0A at 12V |
| Waterproofing | IP66 (Unit and Antenna) |
| Operating Temperature | Unit: -15°C to +55°C, Antenna: -25°C to +70°C |
| Dimensions (KP-27A) | H 155.1mm x W 241.3mm x D 62.9mm |
| Weight | 1.0 KG |
This table provides a detailed comparison of features across different models in the KP-25 and KP-27 series, including display size, resolution, GNSS, mapping compatibility, NMEA interface, GPS antenna, fish finder, and built-in AIS.
This image provides comprehensive technical details on plotter functions (waypoints, routes, tracks, alarms, drawing, palette, tides, position format, basemap, external map, user data storage, plot interval, plotting scales, AIS, AIS target tracking, perspective view, celestial), AIS interface (data, output baudrate, characteristics), and echo sounder features (color, basic range, display mode, display advance speed).
This image highlights important features such as K-Chart, C-Map MAX, Navionics+ compatibility, SD Card System Update, Class B+ AIS Transponder, Built-in Fish Finder, NMEA0183/NMEA2000 interfaces, Sunlight Viewable LCD, and IP66 Ingress Protection.
7. User Tips
- Language Settings: The device supports multiple languages. If you require a specific language like Portuguese or Russian, check the system's language settings in the main menu.
- Transducer for Fish Finder: Remember that the built-in fish finder functionality requires a separate transducer to be purchased and installed. The KP-27A model does not include a transducer as standard.
- Chart Compatibility: While the device supports K-Chart (free), C-Map Max, and Navionics+, specific regional charts (e.g., Chilean sea charts) may need to be purchased separately or loaded onto the device via an SD card. Always verify chart availability for your operating area.
- Full Manual: For comprehensive details on all features, advanced settings, and detailed installation instructions, it is recommended to download and consult the full user manual available as a PDF.
8. Warranty and Support
For detailed warranty information, service, and technical support, please refer to the official ONWA documentation included with your product or visit the ONWA Marine Electronics website. The full user manual (PDF) contains comprehensive information regarding warranty terms and contact details for support.
A PDF version of the user manual is available for download. You can find it at: ONWA KP-27A User Manual (PDF)