Dynoracing BX102723

Contents

Rear Bumper Spike Guard Protector User Manual

Model: BX102723 | Brand: Dynoracing

1. Product Overview

1.1 Product Description

This product is designed for car modification, repairing, and upgrading the performance of your car. It is engineered with high-quality material to ensure durability and compliance with EU regulations. It serves as an anti-collision device for the rear bumper.

Red rear bumper spike protector with an inset image of it installed on a blue car bumper.
Dynoracing Rear Bumper Spike Guard Protector (Red variant shown)

1.2 Package Contents

  • 1 x Main component (Rear Bumper Spike Guard Protector)

Note: Auxiliary installation accessories need to be purchased separately. This product is sold individually.

2. Specifications

Attribute Value
Brand Name Dynoracing
Model Name BX102723
OEM NO. BX102723
Item Type Styling Mouldings
Special Features Rear Bumper Spike Guard Protector
Material Aluminum
External Testing Certification iso9001
Item Length 85 mm
Item Width 37.6 mm
Item Height 8.5 mm (This value seems inconsistent with length/width, likely refers to thread height or similar. Refer to diagram for overall height.)
Item Weight 0.09 kg
Model Year Compatibility 2009-2014 (for Benz SMART Fortwo ED 451 W451)
High-concerned chemical None
Diagram showing the dimensions of the red bumper spike: 85mm total length, 37.6mm maximum width, and 15mm thread diameter.
Product Dimensions
Five bumper spikes in different colors: black, blue, red, gold, and silver.
Available Colors

3. Important Safety Warnings & Compliance

  • EU Regulatory Compliance: This product complies with EU regulations. Do not use or modify this component beyond the scope specified in this manual, as non-compliance may invalidate vehicle type approval and lead to legal liability.
  • Professional Installation Required: Installation must be performed by a qualified automotive technician with relevant EU automotive repair certifications (e.g., ASE, IMI). Improper installation may cause component failure, vehicle damage, or personal injury.
  • Safety Precautions:
    • Disconnect the vehicle battery before installation to avoid electrical short circuits.
    • Wear protective gear (safety goggles, gloves, anti-slip shoes) during installation.
    • Do not install or operate the product while the vehicle is in motion or the engine is running (except for post-installation testing as specified).
  • Compatibility Check: Verify that the product is compatible with your vehicle's make, model, and year before installation. Using incompatible components may result in mechanical malfunction or safety hazards.

4. Setup (Installation Instructions)

4.1 Pre-Installation Preparation

  1. Park the vehicle on a flat, level surface and engage the parking brake. Turn off the engine and allow it to cool completely (minimum 30 minutes).
  2. Clean the installation area (e.g., engine bay, suspension mount) with a non-corrosive cleaner to remove dirt, oil, or debris. Dry thoroughly with a clean cloth.

4.2 Step-by-Step Installation

  1. Locate the original component to be replaced or the desired mounting point on the rear bumper.
  2. It is highly recommended to find professional repair personnel for installation. If you choose to install it yourself, please ensure that you have rich experience and hands-on ability in this area.
  3. Attach the spike guard protector to the designated area. Ensure it is securely fastened.
Disassembled view of the red bumper spike and a black washer.
Components of the Bumper Spike
Three examples of the bumper spike installed on different car bumpers: red, white, and dark grey vehicles.
Installation Examples on Various Vehicles

4.3 Post-Installation Testing

  1. Test whether the installed product can be used normally (e.g., ensure it does not trigger a car malfunction alarm and does not affect driving).
  2. If any issues are detected, stop using the vehicle immediately and contact the manufacturer or a qualified technician for inspection.
  3. Complete all steps and clean the vehicle.

5. Operating

The Dynoracing Rear Bumper Spike Guard Protector is a passive anti-collision accessory. It does not require active operation. Once installed, it functions as a protective barrier for your vehicle's rear bumper.

6. Maintenance & Care

  • Regular Inspection: Inspect the component every 5,000 km or 6 months (whichever comes first). Check for loose bolts, cracks, corrosion, or wear. Tighten loose hardware and replace damaged parts promptly.
  • Cleaning: Clean the component with a soft brush. Avoid using abrasive cleaners, solvents, or high-pressure water (which may damage the surface or seals).
  • Replacement Interval: Replace the component if it shows signs of permanent damage.
  • Storage: If removing the component for long-term storage, clean it thoroughly, dry completely, and store in a cool, dry place away from direct sunlight and corrosive substances.

7. Troubleshooting

This product is a simple mechanical accessory, and major troubleshooting is generally not required. However, if you encounter any of the following issues:

  • The spike becomes loose after installation.
  • Visible damage or deformation to the spike.
  • The spike interferes with other vehicle components or sensors.

Immediately stop using the vehicle and contact the manufacturer or a qualified automotive technician for inspection and resolution.

8. User Tips

  • Users have reported that this product offers a good fit and enhances the aesthetic appeal of the rear bumper, particularly for Smart Fortwo 451/2008 models.
  • Consider purchasing a pair if you intend to install protectors on both sides of your rear bumper, as the product is sold individually.

9. Warranty & Support

9.1 Warranty Coverage

The manufacturer provides a 1-year limited warranty from the date of purchase, covering defects in materials and workmanship under normal use and proper installation. This warranty applies only to the original purchaser and is non-transferable.

9.2 Warranty Exclusions

This warranty does not cover:

  • Damage caused by improper installation, misuse, abuse, or modification of the product.
  • Wear and tear due to normal use (e.g., surface scratches, minor corrosion).
  • Damage from accidents, natural disasters, or exposure to extreme temperatures/chemicals.
  • Failure to follow maintenance instructions outlined in this manual.

9.3 Manufacturer Contact Information

Manufacturer: Ruian Biaoxin Electronic Commerce Inc.

Address: No. 190, Youdian South Road, Tingtian Street, Ruian city, Wenzhou, Zhejiang, China, 325200

Contact: jimix-racing@hotmail.com / +86-13967716933

9.4 EU Authorized Representative

Company Name: ORIENT CONSULTING SL

Address: Av.de la Industria, 2, Nave 16, 28947 Fuenlabrada Madrid, Spain

Contact: rae@orientconsulting.es / +34-912918327

10. Important Safety Information

  1. Warning: Keep the device and its cord (if applicable) out of reach of children under 3 years old.
  2. Keep away from children unless supervised by an adult.
  3. Do not use this product for purposes other than its intended use.
  4. Inspect the product before each use; do not use if damaged.
  5. Please dispose of this discarded product in a reasonable manner according to local regulations, without polluting the environment and protecting the health of others.

11. Additional Resources

A detailed user manual in PDF format is available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.