Introduction
This manual provides detailed instructions for the safe and efficient operation of your SUGON 3010PM Programmable DC Power Supply. Please read this manual thoroughly before using the device and keep it for future reference.
The SUGON 3010PM is a high-performance programmable DC power supply designed for professionals, offering precise voltage and current regulation up to 30V and 10A, with a maximum power output of 310W. It features multiple protection mechanisms and convenient memory channels for storing settings.
Safety Guidelines
Always observe the following safety precautions to prevent injury or damage to the device:
- The cooling fan operates automatically when the internal temperature reaches a certain threshold. Ensure that the air intake and fan vents are not blocked or isolated to allow proper airflow.
- Avoid severe collisions or incorrect usage that could lead to machine damage.
- Keep the device away from static electricity.
- Do not attempt to disassemble the machine if you are not a qualified professional.
- The AC input voltage is 220V/110V, 50Hz/60Hz. Ensure the correct voltage is supplied.
- Always connect the protective ground wire to earth to prevent electric shock.
- Fuse Replacement:
- The corresponding fuse models are 220V/5A and 110V/10A.
- Before starting up, ensure the correct type of fuse is installed.
- To prevent fire, replace blown fuses only with the correct type and rating.
- Always disconnect the power cord before replacing the fuse to avoid electric shock.
- Determine the cause of the blown fuse before replacing it to prevent recurrence.
Product Overview and Package Contents
The SUGON 3010PM DC Power Supply comes with the following items:
- SUGON 3010PM Main Unit
- Instruction Manual (this document, also available as PDF)
- Power Cord
Key Features:
- Digital displays for Voltage, Current, and Power.
- Voltage and Current adjustment knobs for precise control.
- 4 Memory Channels (M1-M4) for storing and recalling settings.
- Adjustable USB outputs (0-30V) and fixed 5V/2A USB outputs.
- Multiple protection features: Overvoltage Protection, Overcurrent Protection (Single-time and Continuous), Short-Circuit Protection.
- Constant Current (CC) and Constant Voltage (CV) modes.
- 8.4V Limited Features (on some models) to prevent operational errors.
- Extra-Large Toroidal Transformer for stable performance.
Specifications
| Feature | Specification |
|---|---|
| Model Number | SUGON 3010PM |
| Type | Programmable DC Power Supply |
| Output Voltage | 0-30V |
| Output Current | 0-10A |
| Max Power (W) | Up to 1 kW (310W typical for 30V/10A) |
| Input Voltage | 110V/220V AC |
| Output Frequency | 50/60Hz |
| Current Type | DC |
| Phase | Three Phase |
| Number of Sockets | 3 or more (6 adjustable USB, 2 fixed 5V2A USB) |
| Certifications | CE, FCC |
| Net Weight | 6.9 kg |
| Gross Weight | 7.7 kg |
| Dimensions (L x W x H) | 240mm x 145mm x 185mm (9.44in x 5.70in x 7.28in) |
Setup
- Unpacking: Carefully remove the power supply and all accessories from the packaging. Inspect for any signs of damage.
- Placement: Place the power supply on a stable, level surface. Ensure there is adequate ventilation around the unit, especially for the fan vents at the rear. Do not block the air intake or fan outlets.
- Power Connection:
- Verify that the power supply's input voltage setting matches your local mains voltage (110V or 220V).
- Connect the provided power cord to the AC input socket on the rear of the unit.
- Plug the other end of the power cord into a grounded AC outlet. Ensure the protective ground wire is properly connected to earth.
- Initial Power On: Flip the power switch located on the front panel to the 'ON' position. The display should illuminate, showing the default voltage, current, and power readings.
Operating Instructions
Basic Operations
- Voltage Regulation:
- Directly twist the 'V' knob to adjust the voltage output.
- Press the 'V' knob to select the voltage digit you wish to adjust (the corresponding indicator light will flash).
- Rotate the 'V' knob to set the desired voltage value.
- Current Regulation:
- Directly twist the 'A' knob to adjust the current output.
- Press the 'A' knob to select the current digit you wish to adjust (the corresponding indicator light will flash).
- Rotate the 'A' knob to set the desired current value.
- Output Switch: Press the 'OUTPUT ON/OFF' button to enable or disable the voltage and current output from the main terminals and adjustable USB ports. When output is off, the display will show "OFF".
Advanced Features
- Lock/Unlock Function:
- To lock the controls, press and hold the 'V' knob until the lock indicator light illuminates. In this state, all buttons and knobs (except Power Switch, Output Switch, Factory Reset, and Buzzer settings) will be inactive.
- To unlock, press and hold the 'V' knob again until the lock indicator light turns off. All controls will return to normal function.
Instructions for Voltage Calibration/Fine Tuning and the Lock/Unlock Function. - Memory Storage (M1-M4):
- To store settings: Long press any of the M1, M2, M3, or M4 memory keys (until two beeps are heard) to save the current voltage, current, and overcurrent/constant current protection settings.
- To recall settings: Short press any of the M1, M2, M3, or M4 memory keys (one beep) to load the previously stored settings.
The 4 memory channels allow for quick storage and recall of frequently used settings. - Adjustable USB Output (0-30V):
- The 6 adjustable USB ports provide output from 0-30V.
- Before connecting a device, set a safe voltage and current using the main controls.
- These outputs mirror the main positive and negative output ports. You can monitor charging voltage, current, and power on the main display.
- Fixed USB Output (5V/2A):
- The two fixed USB ports provide a constant 5V/2A output.
- These ports are suitable for charging mobile phones and other 5V devices.
The adjustable USB outputs (0-30V) and fixed 5V/2A USB outputs for various devices. - Continuous Overcurrent Protection (CONT.OCP):
- Press the 'CONT.OCP' button once (less than 1 second) to activate continuous overcurrent protection. The indicator light will remain on.
- This is the most commonly used protection mode. The power supply will automatically restore output after an overcurrent event.
- Single Overcurrent Protection (ONCE OCP):
- Press the 'ONCE OCP' button once (less than 1 second) to activate single overcurrent protection. The indicator light will stay on for a prolonged period.
- This mode is suitable for faulty circuits that cannot withstand multiple current surges. After activation, the indicator light flashes, and the power supply will have no output until the 'ONCE OCP' button is pressed again to restart.
- Constant Current (CC) and Constant Voltage (CV) Mode:
- Press the 'C.C C.V' button once (less than 1 second) to switch to CC/CV mode. Both the continuous and single overcurrent protection indicators will turn off.
- In this mode, the power supply continuously outputs voltage and current without overcurrent protection, maintaining either constant current or constant voltage depending on the load.
- 8.4V Limited Features: On some models, the maximum voltage output can be limited to 8.4V during daily operation. This feature helps minimize potential damage caused by operational errors.
Calibration and Hidden Functions
- Voltage Calibration/Fine-Tuning:
- Carefully remove the 'A' (Current) knob.
- Insert a small-blade screwdriver into the exposed slot and gently rotate it to calibrate the current voltage. Compare with a standard meter for accuracy.
- Buzzer Settings: While the unit is in the locked state, long press the 'A' (Current) knob to toggle the buzzer sound on or off.
- Restore Factory Settings: While the unit is in the locked state, press and hold both the M1 and M2 memory keys. The display will show "r St", and a long beep will sound, indicating that the factory memory settings for M1, M2, M3, and M4 have been restored.
- Display Brightness Adjustment: In normal use, press and hold both the M1 and M2 memory keys. The voltage display will show "8888", and the current display will show the current brightness level. Rotate the 'A' (Current) knob to adjust the brightness. Press the 'A' knob again to save the brightness setting and exit.
Maintenance
- Cleaning: Regularly clean the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.
- Ventilation: Keep the air intake and fan vents clear of dust and obstructions to ensure proper cooling.
- Storage: When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures.
- Fuse Check: If the unit fails to power on, check the fuse located at the rear of the unit. Replace only with the specified type and rating (220V/5A or 110V/10A).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Unit does not turn on | Power cord disconnected, power switch off, blown fuse, incorrect input voltage. | Check power cord connection, ensure power switch is ON, check/replace fuse, verify input voltage. |
| No output voltage/current | Output switch is OFF, overcurrent protection activated, unit is in locked state. | Press the 'OUTPUT ON/OFF' button, check OCP/CCP indicators and reset if active, unlock the unit (long press 'V' knob). |
| Controls unresponsive | Unit is in locked state. | Long press the 'V' knob to unlock the unit. |
| Buzzer is silent/always on | Buzzer setting is toggled off/on. | In locked state, long press the 'A' knob to toggle buzzer sound. |
| Display too dim/bright | Display brightness needs adjustment. | Press and hold M1+M2, then rotate 'A' knob to adjust brightness. Press 'A' knob to save. |
User Tips
- Voltage Compatibility: The SUGON 3010PM is designed to operate with both 110V and 220V AC input. Ensure you select the correct voltage setting for your region to prevent damage.
- Certifications: This power supply holds CE and FCC certifications, indicating compliance with European safety standards and electromagnetic compatibility requirements.
- Memory Presets: Utilize the 4 memory channels (M1-M4) to save frequently used voltage and current settings for quick recall, enhancing workflow efficiency.
- USB Charging: Take advantage of the adjustable USB outputs for testing various devices or the fixed 5V/2A outputs for standard mobile device charging. Always set safe voltage and current limits for adjustable outputs.
Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official product documentation or contact your vendor. The full user manual is available in PDF format for comprehensive guidance.
You can access the PDF version of this manual here.