1. Important Safety Warnings
Suitable for ages over 14.
- The packaging and instructions contain important information and should be kept for future reference.
- You are responsible for ensuring that no harm will be caused to the personal and property of others when operating this aircraft.
- Ensure a distance of 2 to 3 meters between the aircraft and users/bystanders during operation to prevent injury.
- This product is prohibited for operation by children under 14 years old. Children should be guided by adults.
- Follow installation and usage instructions carefully. Some parts require adult assembly.
- The product contains small parts; keep out of reach of children to prevent choking hazards.
- Do not operate on roads or in areas with standing water to avoid accidents.
- Do not disassemble or modify the aircraft, as this may cause malfunction.
- Use only the designated power supply (5V=2A) and the charging cable configured by the factory. The charging cable is not a toy.
- Charge the rechargeable battery under adult supervision, away from flammable materials. Do not leave the monitoring range during charging.
- Do not short-circuit, squeeze, decompose, or throw the battery into fire or high-temperature environments.
- Keep a safe distance from the high-speed rotating propellers to avoid injury.
- The motor can become hot; avoid touching it to prevent burns.
- LEDs emit laser radiation; do not direct the light beam at others.
- Do not use the model near your ears to prevent hearing damage.
- Stop the model remote control in city areas as required by aeronautical radio station regulations.
- Turn off the aircraft switch and unplug the battery when it's depleted. Allow 30 minutes of rest before recharging to prevent battery damage.
2. Package Contents
Please check the package to ensure all items are present:
- Aircraft x1
- Remote Controller x1
- Camera x1 (integrated, depending on model)
- Batteries x1 (for drone)
- USB Charging Cable x1
- Spare Fan Blades x4
- Fan Blade Replacement Tool x1
- Screwdriver x1
- Operating Instructions Manual x1
Figure 2.1: Contents of the 4DRC V8 Mini Drone package. Includes the drone, remote control, battery, charging cable, spare propellers, and tools.
3. Product Overview
3.1 Aircraft Parts
Familiarize yourself with the main components of your drone:
- Power Switch: Turns the drone on/off.
- Fan Blade: Propellers for flight.
- Safety Guard: Protects propellers from impact.
- Motor: Drives the fan blades.
- Camera: Captures photos and videos.
- Battery: Powers the drone.
- Shell: Main body casing.
- LED Lights: Indicate status and orientation.
3.2 Remote Control Parts
Understand the functions of each button and lever on the remote control:
- Left Joystick (Throttle/Rudder): Controls altitude and rotation.
- Right Joystick (Advance/Reverse/Left/Right): Controls forward, backward, and sideward movement.
- Power Switch: Turns the remote control on/off.
- Indicator Light: Shows remote control status.
- 360° Roll Button: Initiates flip maneuvers.
- One-Key Take-off/Landing Button: For automated take-off and landing.
- Emergency Stop/One-Key Calibration Button: Stops motors or calibrates gyroscope.
- Headless Mode/One-Key Return Button: Activates headless mode or returns the drone.
- Fine-Tuning Buttons: Adjust drone drift (Advance, Reverse, Left, Right).
- Remote Control Mode/Induction Mode Button: Switches control modes.
4. Setup
4.1 Fan Blade Installation
- If a fan blade is damaged, use the provided tool to carefully remove it.
- Identify the correct replacement blade. Fan blades are marked with A1, A2, B1, or B2. Ensure A1 matches A2, and B1 matches B2.
- Install the new blade according to the diagram (A1/A2 blades go in specific positions, B1/B2 in others). Incorrect installation will prevent flight.
4.2 Lithium Battery Charging (Drone)
- Locate the battery lock on the aircraft and unbuckle it.
- Carefully remove the drone's battery.
- Connect the USB charging cable to a USB port on a computer or a 5V=2A power adapter.
- Connect the other end of the USB charging cable to the battery socket.
- The USB red light on the aircraft will turn off during charging and will be continuously on when charging is complete.
Important: Only use the aircraft charging cable provided by the factory. Using other cables may cause damage or accidents.
4.3 Remote Control Battery Installation
- Remove the battery cover on the back of the remote control.
- Insert 3 x 1.5V AAA batteries (not included) according to the polarity markings (+/-) inside the battery compartment.
- Replace the battery cover.
Note: Do not mix old and new batteries, or different types of batteries.
4.4 Mobile Phone Holder Installation (Remote Control)
Attach your mobile phone to the remote control holder as indicated in the remote control diagram. This allows you to view the FPV feed from the drone's camera.
4.5 APP Download and Installation
- Scan the QR code provided in the manual (or search for "4DRC FPV" in your app store).
- Select the appropriate operating system (iOS or Android) and download the app.
- Install the "4DRC FPV" application on your mobile device.
Figure 4.1: The 4DRC V8 Mini Drone ready for setup, showing the drone, remote, and mobile phone.
5. Operating Instructions
5.1 Environmental Requirements Before Flight
- Fly in an outdoor open environment without rain or snow.
- Avoid flying in winds stronger than level 3.
- Stay away from people, trees, wires, tall buildings, airports, and signal transmission towers.
5.2 Pre-Flight Preparation (Remote Control)
- Power On Aircraft: Turn on the drone's power switch and place it on a horizontal surface. The front blue LED and rear red LED will flash, indicating it's in frequency matching mode. Ensure the drone's nose faces forward.
- Power On Remote Control & Pairing: Press and hold the remote control's power switch. The indicator light will turn on. Push the left joystick (throttle) all the way up, then all the way down. The drone's lights will stop flashing and become solid, indicating successful pairing.
- Horizontal Calibration: Long press the calibration key on the remote control. The drone's LED lights will flash rapidly and then become solid. This indicates calibration is complete. Ensure the drone is on a horizontal plane during calibration.
- Start/Stop Motors: Push both joysticks down and outwards simultaneously to start the motors. To stop, push both joysticks down and inwards.
- One-Key Take-off/Landing: After unlocking, gently press the one-key take-off/landing button. The drone will automatically rise to about 1 meter and hover. Press it again to land slowly.
5.3 Remote Control Flight Methods
- Altitude Control: Push the left joystick up to ascend, pull down to descend.
- Rotation (Yaw): Push the left joystick left to rotate left, push right to rotate right.
- Forward/Backward: Push the right joystick up to fly forward, pull down to fly backward.
- Sideward Flight (Roll): Push the right joystick left to fly left, push right to fly right.
5.4 360° Roll (Flips)
Ensure the drone is at least 1.5 meters above the ground. It's best to perform rolls during ascent.
- Left Roll: Short press the 360° roll button, then push the right joystick to the left.
- Right Roll: Short press the 360° roll button, then push the right joystick to the right.
- Forward Roll: Short press the 360° roll button, then push the right joystick up.
- Backward Roll: Short press the 360° roll button, then push the right joystick down.
5.5 Headless Mode
In headless mode, the drone's orientation is relative to the pilot, regardless of its actual front. Short press the headless mode button to activate/deactivate. Ensure the drone is aligned straight before activating for best results.
5.6 One-Key Return
When the drone is far away, press and hold the one-key return button. The drone will automatically fly back towards the remote control. Any joystick input will cancel the return function.
5.7 Speed Switching
The drone defaults to low speed. Gently press the speed switch button to cycle through low (1 beep), medium (2 beeps), and high (3 beeps) speeds.
5.8 Fine-Tuning
If the drone drifts in any direction, use the fine-tuning buttons to correct its flight path:
- If drifting backward, press the forward fine-tuning button.
- If drifting forward, press the backward fine-tuning button.
- If drifting right, press the left fine-tuning button.
- If drifting left, press the right fine-tuning button.
5.9 Induction Mode (Hand Control)
- Press the remote control's induction mode switch button to enter induction mode.
- Place your palm about 10 cm below the drone to control its altitude.
- Move your hand left/right to make the drone fly left/right.
- Inductive Roll: Place both hands on the left and right inductive heads of the drone. After two seconds, the drone will automatically perform a 360° roll.
5.10 Throw Flight Mode
- Turn on the drone and place it on a horizontal plane.
- If no remote control pairing occurs within 3 seconds, hold the drone and stretch it forward.
- Wait for the blue and red LEDs to flash slowly.
- Throw the drone upward or swing your hand downward; it will automatically take off.
5.11 APP Control (WiFi FPV)
- Connect WiFi: Turn on the drone. On your mobile device, go to WiFi settings and connect to the network named "4DRC********".
- Launch App: Open the "4DRC FPV" app.
- Start Control: Tap "START" to enter the control interface.
- Pre-Flight Preparation (APP):
- Frequency Matching: In the app, tap "OFF", then turn on the touch joystick, and tap "More Functions" to enable "aircraft constant light on". This confirms pairing.
- Horizontal Calibration: Tap the "correction" icon in the app. The drone's LEDs will flash and then become solid.
- One-Key Take-off/Landing: Tap the "one-key take-off" icon to launch, and the "one-key landing" icon to land.
- APP Flight Controls: Similar to remote control, use the on-screen joysticks for altitude, rotation, and movement.
- APP Features: The app includes media library, photo/video capture, return, fixed height, control panel, image flipping, gravity induction, headless mode, gesture control, and more.
- Gesture Recognition: Face the drone's front lens (2-3m away in good lighting). Tap the gesture photo button in the app. Use specific hand gestures (e.g., open palm for photo, fist for video) to trigger photo or video recording.
Video 5.1: Product demonstration showcasing features like hand throw takeoff, fixed high hover, propeller protection, modular battery, remote/app/induction control, trajectory flight, one-click flips, gravity sensor, and rollover stop.
6. Maintenance
- Battery Care: Always disconnect the battery from the drone when not in use. Store batteries in a dry place. Do not overcharge or over-discharge.
- Propeller Inspection: Regularly check propellers for damage (bends, cracks). Replace any damaged propellers immediately using the provided tool and spare parts.
- Cleaning: Use a soft, dry cloth to clean the drone and remote control. Avoid using water or solvents.
- Storage: Store the drone and accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting (FAQ)
| Problem | Reason | Solution |
|---|---|---|
| Aircraft indicator flashes without any response | Insufficient power | Charge the battery |
| Blades rotate but cannot fly | 1. Low battery 2. Blade deformation |
1. Charge the battery 2. Replace the blade |
| Aircraft vibrates badly | Blade deformation | Replace the blade |
| Fine-tuning done but still unstable | 1. Blade deformation 2. Defective motor |
1. Replace the blade 2. Replace the motor |
| After impact, flies uncontrollably | Three-axis acceleration sensor loses balance | Perform horizontal calibration (refer to section 5.2, step 3) or let it rest for 5-10 seconds. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | 4DRC |
| Model | V8 Mini Drone (4D-V8) |
| Drone Weight | About 32g |
| Takeoff Weight | About 55g |
| Dimensions | 13 x 11 x 4 cm |
| Material | Plastic |
| Video Capture Resolution | 1080p FHD, 4K UHD |
| Operator Skill Level | Beginner, Intermediate |
| Indoor/Outdoor Use | Indoor-Outdoor |
| Camera Mount Type | Fixed Camera Mount |
| Controller Mode | MODE2 |
| Control Channels | 4 Channels |
| Remote Distance | 80M |
| Flight Time | 10~20 minutes |
| Charging Time | About 40 minutes |
| Charging Voltage | 3.7V (USB) |
| Controller Battery | 3 x 1.5 AAA Battery (not included) |
| Motor Type | Brush Motor |
| Power Source | Electric (Lithium Battery) |
| Features | App-Controlled, Aerial Photography |
| Anti-wind Ability | <10km/h |
| Certification | CE |
| Recommended Age | 14+y |
9. User Tips
- Video Capture: This drone is capable of capturing videos in 1080p FHD and 4K UHD resolutions. Ensure sufficient storage on your mobile device when recording via the app.
- Control Options: You can control the drone using the included physical remote controller or via the dedicated smartphone app. The app offers additional features like FPV view and gesture control.
- Beginner-Friendly: The drone is designed for beginner to intermediate skill levels, offering features like one-key take-off/landing and headless mode to ease the learning curve.
- Aerial Photography: Utilize the drone's camera for aerial photography and videography. Experiment with different flight modes and altitudes for unique shots.
- Battery Management: Always ensure both the drone and remote control batteries are fully charged before each flight for optimal performance and flight time.
10. Warranty and Support
This product comes with a 15-day warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly through the platform where the product was purchased.
Refer to the official PDF user manual for any additional detailed diagrams or instructions not fully covered here: View PDF User Manual