1. Introduction
Thank you for choosing the Data Frog Wireless Controller S80. This controller is designed to enhance your gaming experience on Nintendo Switch (OLED/Lite) and PC, featuring programmable buttons, turbo functions, and customizable RGB lighting.
2. Package Contents
- Data Frog Wireless Controller S80
- USB-C Charging Cable
- User Manual (this document)
3. Setup
3.1 Charging the Controller
Before first use, fully charge the controller. Connect the supplied USB-C cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, PC, USB wall adapter). The indicator lights will show charging status and turn off or change color when fully charged.
Charge Time: Approximately 3.0 hours for a full charge.
3.2 Connecting to Nintendo Switch
- On your Nintendo Switch, go to the HOME Menu and select 'Controllers' > 'Change Grip/Order'.
- On the Data Frog S80 controller, press and hold the HOME button + Y button simultaneously to enter pairing mode. The indicator lights will flash rapidly.
- Once paired, the controller will vibrate, and the player indicator light(s) will remain solid.
- For subsequent connections, simply press the HOME button to wake up and automatically reconnect to the last paired Switch console.

Image 1: Controller showing the HOME + Y button combination for pairing and the HOME button for one-click awakening.
3.3 Connecting to PC
The controller can be connected to a PC via Bluetooth. Ensure your PC has Bluetooth capabilities.
- Enable Bluetooth on your PC.
- On the Data Frog S80 controller, press and hold the HOME button + X button simultaneously to enter PC pairing mode. The indicator lights will flash rapidly.
- On your PC, go to Bluetooth settings and search for new devices. Select 'Pro Controller' or similar from the list to pair.
- Once paired, the controller will vibrate, and the player indicator light(s) will remain solid.
4. Operating Instructions
4.1 RGB Lighting Effects
The controller features customizable RGB lighting around the joysticks.
- To cycle through different RGB lighting modes: Press the Light Bulb button (located below the right joystick) and the Right Arrow button (on the D-pad) simultaneously.
- To change the RGB color within the current mode: Press the Light Bulb button.

Image 2: Controller highlighting the RGB lighting effects on the joysticks and the buttons used to control them.
4.2 Auto & Manual Turbo Function
The Turbo function allows for rapid, repeated input of a button press. There are three speed settings: 5 shots/s, 12 shots/s, and 20 shots/s.
- To activate Turbo: Press and hold the Turbo (T) button, then press the desired action button (A, B, X, Y, L, R, ZL, ZR). The button will now repeatedly activate when held down.
- To adjust Turbo speed: While Turbo is active for a button, press and hold the Turbo (T) button and move the Right Analog Stick Up or Down to cycle through the three speed settings.
- To deactivate Turbo: Press and hold the Turbo (T) button, then press the action button again.

Image 3: Controller illustrating the Turbo button and its combination with other buttons for rapid fire, along with speed settings.
4.3 Programmable Back Buttons (M1/M2)
The M1 and M2 buttons on the back of the controller can be programmed to mimic up to 16 basic button functions, allowing for complex actions with a single press.
- To program M1/M2: Press and hold the Program button (usually a small button near M1/M2, or a combination like Turbo + M1/M2, refer to the PDF manual for exact method if not clear). The controller will enter programming mode (indicator lights may flash).
- Press the sequence of buttons you wish to assign (e.g., A+B+X+Y+...).
- Press the M1 or M2 button you want to assign the sequence to.
- Press the Program button again to exit programming mode. The sequence is now saved to M1/M2.
- To clear M1/M2 programming: Repeat the programming steps but do not input any sequence before pressing M1/M2, or refer to the PDF manual for a specific reset procedure.

Image 4: Back of the controller showing the M1 and M2 programmable buttons and examples of button sequences that can be assigned.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Do not use liquids, solvents, or abrasive cleaners.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the controller frequently. If storing for an extended period, charge the battery to about 50% before storage.
- Avoid Drops: Protect the controller from drops and impacts, which can damage internal components.
6. Troubleshooting
- Controller not connecting: Ensure the controller is charged. Try re-pairing the controller with your device (Switch/PC). Ensure no other Bluetooth devices are causing interference.
- Buttons unresponsive: Power cycle the controller (turn off and on). If issues persist, try resetting the controller (if a reset pinhole is present, use a thin tool; otherwise, a full power cycle might suffice).
- Charging issues: Try a different USB-C cable and a different USB power source. Ensure the charging port is clean and free of debris.
- Input lag: Ensure you are within a reasonable range of your device. Minimize wireless interference from other devices.
For more detailed troubleshooting, please refer to the official PDF user manual: View PDF Manual
7. Specifications
| Brand | DATA FROG |
| Model | S80 |
| Compatibility | Nintendo Switch OLED, Nintendo Switch LITE, PC |
| Interface Type | Bluetooth |
| Battery Capacity | 1000 mAh |
| Play Time | Up to 15 hours |
| Charge Time | Approx. 3.0 hours |
| Certification | CE |
| Dimensions (L x W x H) | 16 cm x 13 cm x 7 cm |
| Weight | 0.289 kg |

Image 5: Controller diagram showing the 1000 mAh battery, 15 hours play time, and 3.0 hours charge time.
8. User Tips
- Always fully charge the controller before its first use to ensure optimal battery calibration.
- Experiment with the programmable M1/M2 back buttons to find configurations that give you an edge in your favorite games.
- Adjust the Turbo speed to match the requirements of different in-game actions for maximum efficiency.
- Keep the controller's firmware updated if updates become available (check the manufacturer's website).
9. Warranty and Support
For warranty information and technical support, please contact the seller or the manufacturer directly. Keep your proof of purchase for any warranty claims.