GVDA GD158

Contents

GVDA GD158 Digital Light Meter User Manual

Model: GD158 | Brand: GVDA

1. Introduction

The GVDA GD158 Digital Light Meter is designed to measure visible light emitted by various sources such as fluorescent lamps, metal halide lamps, high-voltage sodium lamps, and incandescent lamps. It also features ambient humidity and temperature testing capabilities.

One Lux is defined as the light received on a surface of one square meter from a candle with a vertical intensity of one meter. One FC (Foot-Candle) is the light received on a surface of one square foot at a distance of one foot from a candle with a light intensity.

Before using the instrument, please read this manual carefully and save it for future reference.

2. Product Overview

GVDA GD158 Digital Light Meter front view
Front view of the GVDA GD158 Digital Light Meter.
GVDA GD158 Digital Light Meter with 180 degree rotating sensor
The 180° rotatable sensor for flexible measurements.

Key Components:

  1. Protective shield light sensor
  2. Display LCD
  3. Function keys

Function Keys:

  • Power On/Off Key: Turns the device on or off.
  • Data Hold/Backlight Key: Freezes the displayed reading and controls the backlight.
  • Max/Min Key: Toggles between maximum and minimum recorded values.
  • Temperature Unit Selection Key (°C/°F): Switches between Celsius and Fahrenheit.
  • Unit Selection Key (UNIT): Selects between Lux and FC measurement units.

3. Setup and Battery Installation

The device requires 3 x 1.5V AAA batteries (not included). Ensure correct polarity when installing.

GVDA GD158 Digital Light Meter packaging showing manual and battery compartment
The product package includes the manual and a carrying bag. The battery compartment is located at the back.

Battery Replacement:

When the battery voltage is low, the battery symbol will appear on the display. To replace the batteries:

  1. Remove the rear (center) battery compartment screw.
  2. Access the battery compartment and replace the three (3) 1.5V 'AAA' batteries.
  3. Observe correct polarity when placing the batteries.
  4. Ensure that the compartment cover is securely fastened.

4. Operation

GVDA GD158 Digital Light Meter measuring light, temperature, and humidity
The meter automatically measures ambient temperature and humidity upon power-on, alongside light intensity.
GVDA GD158 Digital Light Meter showing MAX MIN and UNIT buttons for function and unit conversion
Use MAX/MIN for extreme values and UNIT for Lux/FC conversion.

4.1. Power On/Off and Automatic Power Off

  1. Press the Power On/Off button to turn the meter on.
  2. Press the Power On/Off button again to turn the meter off.
  3. The meter has an automatic power-off feature that conserves battery energy. After 10 minutes of inactivity, the meter automatically shuts off.
  4. To disable the auto power-off function, press and hold the Power On/Off button to turn the meter on. The auto power-off icon will disappear from the display.

4.2. Taking Measurements

  1. Press the Power On/Off button to turn power on.
  2. Remove the protective cap from the sensor.
  3. Place the sensor in a horizontal position at the measurement location.
  4. Read the light level on the display.

Caution: To protect the lens from scratches, keep the protective cap on the sensor whenever the unit is not in use.

4.3. MAX/MIN Function

  1. Press the MAX/MIN button once to enter MAX/MIN mode. The meter will display the highest reading. The "MAX" icon will appear.
  2. Press the MAX/MIN button again to display the lowest reading. The "MIN" icon will appear.
  3. Press MAX/MIN again to toggle between MAX and MIN readings.
  4. To exit MAX/MIN mode and return to normal real-time display, press and hold the MAX/MIN button (2 seconds) until the MAX and MIN icons disappear.

4.4. Unit Conversion

Press the UNIT button to select the unit of measure. "LUX" or "FC" will appear in the display.

4.5. Data Hold

Press the Data Hold/Backlight button to freeze the displayed reading. The "H" hold icon will appear on the display.

Press the Data Hold/Backlight button again to return to normal operation.

4.6. Backlight Function

Press and hold the Data Hold/Backlight button for about 2 seconds to turn on the backlight. Press and hold it again to turn off the backlight.

4.7. Product Demonstration Video

This video demonstrates the basic functions of the GVDA GD158, including power on, MAX/MIN mode, unit switching, sensor rotation, and light measurement.

5. Specifications

GVDA GD158 Digital Light Meter showing high precision and wide range
High precision and wide measurement range (0-200,000 Lux).
General Specifications
FeatureDescription
Range/Accuracy (Lux)0-200,000 Lux
±(3%+5 words) (at 2854°K incandescent lamps)
±(6%+5 words) (others)
Range/Accuracy (FC)0-20,000 FC
±(3%+5 words) (at 2854°K incandescent lamps)
±(6%+5 words) (others)
Cosine Angle Deviation Characteristics30° ±2%; 60° ±6%; 80° ±25%
SensorSilicon photo-diode and spectral response filter
Operating ConditionsTemperature: 0-40°C
Humidity: <80%RH
Altitude: <2000m
Storage ConditionsTemperature: -10-50°C
Humidity: <80%RH
Sampling RateApprox. 2 times per second
Spectral Range320-730nm
Auto Power Off10 minutes
Power3 x 1.5V AAA batteries
Temperature & Humidity Specifications
MeasurementRangeAccuracy
Temperature-20.0°C to 60.0°C (-4.0°F to 140.0°F)0.0°C to 45.0°C (32.0°F to 113.0°F): ±1.0°C/2.0°F
Other: ±1.5°C/3.0°F
Humidity0.0% to 99.9%RH20% to 80%RH: ±5.0%RH
Other: ±6.0%RH

6. Maintenance

6.1. Cleaning and Storage

To avoid damaging the instrument housing, do not use corrosive or solvent to clean the instrument. The white plastic sensor dome should be cleaned with a damp cloth when necessary.

Store the meter in an area with moderate temperature and humidity (refer to the operating and storage range in the specifications chart earlier in this manual).

Caution: Do not use corrosive or solvent to clean the instrument.

7. Troubleshooting

If the device is not functioning as expected, consider the following:

  • No display or erratic readings: Check battery installation and ensure batteries are not depleted. Replace if necessary.
  • Inaccurate light readings: Ensure the protective cap is removed from the sensor and the sensor dome is clean. Avoid direct exposure to strong light sources that might exceed the meter's range.
  • Auto power-off too soon: If you need continuous measurement, remember to disable the auto power-off function by pressing and holding the power button during startup.

8. User Tips

  • For consistent readings, ensure the sensor is placed horizontally at the desired measurement point.
  • When measuring light, allow a few seconds for the reading to stabilize, especially when moving between different light conditions.
  • Utilize the MAX/MIN function to capture the highest and lowest light levels in a fluctuating environment.
  • The 180° rotatable sensor allows for flexible positioning, which is useful for measuring light from various angles without repositioning the entire device.

9. Warranty and Support

This product is certified with CE and FCC standards. For detailed warranty information and technical support, please refer to the official GVDA website or contact your retailer.

A comprehensive user manual in PDF format is available for download. You can find it by searching for "GVDA GD158 user manual PDF" online or through the seller's support resources.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.