1. Introduction
Thank you for purchasing the P02 Wireless Controller for PC and PlayStation 4 from Data Frog. This manual provides detailed instructions to help you set up, operate, and maintain your controller. Please read it thoroughly before use and retain it for future reference.
2. Safety and Handling Precautions
- Avoid prolonged use. Take breaks at approximately 30-minute intervals.
- Discontinue use immediately if you experience discomfort or pain in your hands or arms. Consult a doctor if symptoms persist.
- Permanent hearing loss may occur if headsets/headphones are used at high volume. Set volume to a safe level.
- Limit the amount of time using headsets/headphones at high volume. Avoid raising volume to block out noisy surroundings.
- Lower the volume if you cannot hear people speaking near you.
- Avoid looking directly into the light bar when it is flashing.
- This product is intended for use with hands only.
- The vibration function may aggravate injuries. Do not use if you have any ailment or injury to bones, joints, or muscles of your hands or arms.
- Do not expose the product to high temperatures, high humidity, or direct sunlight.
- Do not allow the product to come into contact with liquids.
- Do not place heavy objects on the product.
- Do not throw, drop, or subject the product to strong physical shock.
- When using the motion sensor, ensure there is plenty of space around you and grip the controller firmly to prevent accidental injury or damage.
- If using with a USB cable, ensure sufficient cable slack to avoid hitting people/objects or accidentally disconnecting.
3. Setup and Pairing
3.1. Charging the Controller
The controller features a built-in rechargeable Lithium-Ion battery. Charge the controller in an environment with a temperature range of 10°C-30°C (50°F-86°F). Charging outside this range may be less effective.
If the controller is not used for an extended period, fully charge it at least once a year to maintain battery functionality.
3.2. Pairing with PlayStation 4 System
For initial use or when connecting to a different PS4 system, device registration (pairing) is required:
- Turn on your PS4 system.
- Connect the controller to the PS4 system using a USB cable to complete the registration.
For detailed instructions on using the controller with your PS4, refer to the user's guide of the PS4 system.
3.3. Pairing with iPhone & iPad (iOS 13 or later)
- Ensure your iPhone or iPad is updated to iOS 13 or later.
- On your iPhone/iPad, open Settings > Bluetooth and ensure Bluetooth is enabled.
- On the PS4 controller, simultaneously press and hold the SHARE button and the PS button for approximately 3-5 seconds. The indicator light on the top of the joystick will flash quickly. Release the buttons. (Note: Pairing mode cannot be entered during charging).
- On your iPhone/iPad, in the Bluetooth device list, select "DualShock 4 Wireless Controller" to pair.
3.4. Pairing with Android Phones (Android 10 or later)
- Ensure your Android phone or tablet is updated to Android 10 or later.
- On the PS4 controller, simultaneously press and hold the SHARE button and the PS button for approximately 3-5 seconds. The top indicator light will flash white. (It cannot be put into pairing mode while it is charging).
- On your Android device, go to Settings > Bluetooth and ensure Bluetooth is enabled. Search for new devices.
- Select the device named "Wireless Controller" to pair.
3.5. Connecting to PC/Laptop
3.5.1. Wired Connection
- Connect the controller to your computer using a USB cable.
- The necessary drivers will be automatically installed. You can verify installation in "Control Panel" > "Devices and Printers" (device name: "Wireless Controller").
3.5.2. Wireless Connection (Bluetooth)
Before proceeding, ensure your laptop has Bluetooth functionality. If not, a USB wireless Bluetooth receiver (not included) is required.
- If using a USB wireless Bluetooth receiver, insert it into your PC. Drivers will install automatically.
- Enable Bluetooth on your computer.
- On the PS4 controller, simultaneously press and hold the SHARE and PS buttons for approximately 3-5 seconds until the joystick indicator light flashes white.
- On your PC, go to Settings > Devices > Add Bluetooth or other devices > Bluetooth.
- Select "Wireless Controller" from the list of detected devices to pair.
- The computer will automatically pair and install necessary device drivers.
- The light bar on the controller will show a bright white light, indicating a successful connection.
3.5.3. Disconnecting from PC/Laptop
To turn off the controller when not playing, press and hold the L1 + R1 + PS buttons for 5-7 seconds until the light bar turns off.
4. Operating Instructions
4.1. Key Features
- Touchpad Light Bar: Provides visual feedback and enhances game operation.
- 3.5mm Headphone Audio Jack: Supports audio output for an immersive experience.
- 6-Axis Motion Sensor: Provides precise motion control for compatible games.
- Integrated Speaker: Delivers in-game audio details directly from the controller.
- Dual Vibration: Enhances immersion with haptic feedback.
4.2. Motion Sensor Function
When using the motion sensor, ensure you have ample space around you and grip the controller firmly to prevent accidental injury or damage to people or objects.
4.3. Vibration Function
The vibration function can be disabled via the system settings (Settings > Devices > Controllers > Enable Vibration) if desired or if it aggravates existing injuries.
4.4. Gameplay Demonstration
5. Maintenance
- To prevent deterioration or discoloration of the product exterior, avoid placing rubber or vinyl materials on it for extended periods.
- Clean the product with a soft, dry cloth. Do not use solvents, other chemicals, or chemically-treated cleaning cloths.
6. Troubleshooting
- Controller Unresponsive: If the controller becomes unresponsive, locate the small reset button hole on the back of the controller and press it with a thin object (e.g., a straightened paperclip) to reset.
- Game Compatibility: Not all controller functions may work properly in every game. Test all buttons on your PC to ensure the controller is functioning correctly, then check game compatibility.
- PC Multi-Controller Setup: When connecting multiple controllers to a PC, ensure you install drivers for each controller individually via USB first, then connect them via Bluetooth one by one. Using DS4Windows software may also help manage multiple controllers.
- L2/R2 Sensitivity: Some users report slightly worse sensitivity or a longer deadzone on L2 and R2 triggers. This is a characteristic of the controller.
- No Power: If the controller does not turn on, ensure it is sufficiently charged. If the issue persists, try resetting the controller.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | P02 |
| Brand Name | DATA FROG |
| Interface Type | Bluetooth |
| Compatible Brand/Model | Sony (PlayStation) |
| Compatible Sony Models | PLAYSTATION4, PS4 Pro, PS4 Slim |
| Compatible Platform | PlayStation, PC, iOS, Android |
| Input Power Rating | 5V 800 mA |
| Battery Type | Built-in rechargeable Lithium-Ion battery |
| Voltage | 3.7V |
| Battery Capacity | 600 mAh |
| Operating Temperature | 5°C-35°C (41°F-95°F) |
| Bluetooth Version | 4.0 |
| Certifications | CE, FCC, RoHS |
| Package | Yes |
| Product Weight | 0.275 kg |
| Package Dimensions (L x W x H) | 17 cm x 12 cm x 7 cm |
Design and specifications are subject to change without notice.
8. User Tips
- For PC users, consider installing DS4Windows software. Connect the controller via USB first to allow the software to recognize it and install necessary drivers, then disconnect and connect via Bluetooth. This order is important for proper setup.
- The speaker and headphone functions are primarily designed for use with a PS4 console and may not be fully functional on other platforms.
- If you experience any input lag with a wireless connection, try using a wired USB connection for a more responsive experience.
- The controller's build quality is often compared favorably to original controllers, offering a reliable and long-lasting gaming experience.
9. Warranty and Support
For warranty information, technical support, or to view the official user manual in PDF format, please refer to the seller's documentation or contact customer service. The PDF user manual can be found here.