CoBa H-189-8075

Contents

COBA Powerful XHP360 36-core Headlamp Flashlight User Manual

Model: H-189-8075

1. Product Overview

The COBA Powerful XHP360 36-core Headlamp Flashlight is a high-power, rechargeable headlamp designed for various activities such as fishing, camping, and general outdoor use. It features a powerful XHP360 LED, telescopic zoom, angular rotation, and a convenient power display.

COBA XHP360 Headlamp with key features highlighted
Figure 1: Headlamp with features including bidirectional charging, telescopic zoom, angular rotation, and power display.
Exploded view of the headlamp showing internal components
Figure 2: Exploded view illustrating components such as the power line, breathable headband, switch button, metal ring, telescopic zoom lever, metal radiator, XHP360 LED, and zoom convex mirror.

2. Setup Instructions

2.1 Battery Installation

  1. Ensure the headlamp is turned off.
  2. Open the battery compartment.
  3. Insert the 18650 Pointed Head Battery(s) correctly: the positive pole should face down and the negative pole should face up. Ensure there are no obstructions or debris on the battery contact points.
  4. Close the battery compartment securely.
  5. Important: Please remove any battery protection film or cover before first use.

Note: This headlamp requires 18650 Pointed Head Batteries. Do not use 18650 Flat Head Batteries.

Comparison of pointed head and flat head 18650 batteries
Figure 3: Illustration showing the difference between a Pointed Head Battery (recommended) and a Flat Head Battery (not compatible).

2.2 Initial Charging

Before first use, fully charge the battery to ensure optimal performance and lifespan.

  1. Connect the Type-C charging cable to the headlamp's charging port.
  2. Connect the other end of the cable to a compatible USB power source (e.g., charging head, car charger, laptop, power bank).
  3. During charging, the indicator light will flash continuously. Once fully charged, the indicator light will turn off.
  4. Do not exceed 5V during charging to prevent damage to the battery or headlamp.
Charging and power display details
Figure 4: Details on the Type-C input/output, 90-degree rotating illumination, and charging indicator light levels (100%, 75%, 50%, 25%).

3. Operating Instructions

3.1 Power On/Off and Lighting Modes

The headlamp features five lighting modes:

  1. First Press: Activates Strong Light (100% brightness).
  2. Second Press: Changes to Medium Light (50% brightness).
  3. Third Press: Changes to Low Light (25% brightness).
  4. Fourth Press: Changes to Strobe Mode.
  5. Press and Hold (2-3 seconds): Activates SOS Mode from any other mode.
Visual representation of the five lighting modes
Figure 5: Visual guide to the Strong, Strobe, Medium, SOS, and Weak light modes.

3.2 Zoom Function

The headlamp features a telescopic zoom function. Gently pull or push the head of the flashlight to adjust the beam from a wide floodlight to a focused spotlight.

3.3 Angular Rotation

The headlamp can be rotated up to 90 degrees to direct the light precisely where needed, providing flexible illumination.

3.4 Power Display

The integrated power display indicates the remaining battery charge, allowing you to monitor battery levels and recharge as needed.

4. Maintenance

4.1 Cleaning

  • Clean the flashlight with a soft, dry cloth.
  • Avoid using harsh chemicals, abrasives, or solvents, as these can damage the finish or internal components.

4.2 Battery Care

  • If the headlamp will not be used for an extended period, remove the batteries to prevent leakage and damage.
  • Do not allow the battery to become completely empty before recharging, as this can shorten its lifespan.
  • Always use recommended chargers and avoid overcharging the batteries.
  • Store the headlamp and batteries in a cool, dry place, away from extreme heat or cold.
  • For long-term storage, ensure the battery is fully charged before storing.

4.3 General Inspection

  • Regularly check the battery contacts for any obstructions or dirt and clean if necessary.
  • Periodically inspect internal connections for signs of rust or dirt.
  • If needed, lubricate the threads with silicone grease to maintain smooth operation and water resistance.

5. Troubleshooting

5.1 Charging Indicator Not Working

  • The battery may be completely discharged. Wait at least 10 minutes after connecting to a charger for the indicator to light up.
  • Check if the charging cable or charging device is damaged. Try a different cable or power source.
  • The charging port may be dirty. Clean it gently to ensure proper connection.
  • The battery itself may be damaged and require replacement.
  • Ensure the charging cable is fully and securely connected to both the headlamp and the power source.

5.2 Headlamp Not Turning On or Emitting Weak Light

  • Ensure the battery is correctly inserted and fully charged.
  • Check that the battery compartment is fully depressed and securely closed.
  • Verify that the battery contacts are clean and free from obstructions.

5.3 Headlamp Becomes Warm During Use

  • It is normal for the headlamp to become warm after prolonged use, especially on higher brightness settings, due to its high-power LED and dust/water-resistant design.

6. Specifications

Feature Description
Brand Name CoBa
Model Number H-189-8075
Light Source XHP360 36-core LED
Lighting Modes Strong (100%), Medium (50%), Low (25%), Strobe, SOS
Battery Type 18650 Pointed Head Lithium Battery (not always included)
Charging Port Type-C USB (Bidirectional charging)
Zoom Function Telescopic zoom
Rotation Angle 90 degrees
Water Resistance Daily use waterproof (not suitable for diving)
Certification CE
Origin Mainland China
Dimensions (approx.) Length: 67mm, Head Diameter: 43mm
Headlamp dimensions: 67mm length, 43mm head diameter
Figure 6: Approximate dimensions of the headlamp.

6.1 Product Accessories

  • Headlamp unit
  • Cowhide box (packaging)
  • Type-C charging cable
  • Note: 18650 lithium batteries may not be included in all packages. Please check your specific order details.
Product accessories including headlamp, box, and charging cable
Figure 7: Standard product accessories.

7. User Tips

  • Many users report high satisfaction with the brightness of this headlamp, often finding it brighter than expected.
  • When using the zoom function, some users have noted that a square pattern may appear in the beam, which is a characteristic of the optical design.
  • While the stated battery capacity can sometimes be optimistic, the overall performance for an XHP360 LED is generally considered good.

8. Warranty and Support

8.1 General Precautions

  • Do not disassemble or modify the flashlight yourself, as this may void the warranty.
  • Avoid strong impacts to the flashlight head.
  • The flashlight is a high-intensity lighting tool; do not point it directly at your eyes to prevent injury.
  • The flashlight is waterproof for daily use, but it is not suitable for diving. Ensure all sealed parts are tightly closed when using it in wet conditions.
  • Do not disassemble the flashlight during sandy or dusty weather conditions to prevent internal damage.
  • Both cold weather and overheating of the battery can affect its autonomy and performance.

8.2 Additional Resources

For detailed information and further assistance, please refer to the official user manual available as a PDF: User manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.