KEBETEME GPS Antenna / GPS Receiver

Contents

KEBETEME Car GPS Antenna SMA Connector

Model: GPS Antenna / GPS Receiver

1. Product Overview

This GPS external receiver antenna is specifically designed for in-vehicle terminals such as car navigation systems and DVRs. It features a high-gain signal reception scheme and is equipped with an SMA female connector, which is precisely matched to the SMA male connector on the device. The product effectively enhances GPS signal reception, addressing issues like weak signal, slow positioning, and positioning drift in in-vehicle devices, thereby ensuring accurate and stable navigation and positioning data.

KEBETEME GPS Antenna with satellite signal icon, showing the main unit, coiled cable, and SMA connector.
Figure 1: KEBETEME GPS Antenna with satellite signal icon, showing the main unit, coiled cable, and SMA connector.
Video 1: Product overview of the KEBETEME GPS Antenna, showcasing its design and features.

2. Specifications

Item Specification
Connector Type SMA female (compatible with SMA male connectors on devices)
Compatible Devices Car navigation systems, in-vehicle DVRs (with GPS SMA male connector)
Function Enhance GPS satellite signal reception, improve positioning accuracy and speed
Cable Feature High-shielding anti-interference cable, effectively reduces in-vehicle electromagnetic interference
Color Black
Voltage 3V~5V
Frequency 1575.42MHz
DC Current (Max) 10mA
Polarization Circular (RH)
Operating Temperature -45°C ~ +85°C
Storage Temperature -50°C ~ +90°C
Cable Length 3 Meters
Antenna Unit Dimensions 46mm x 38mm (approximate)
Image highlighting the 3-meter cable length and SMA plug of the GPS antenna.
Figure 2: Cable length (3 meters) and SMA Plug detail.
Close-up of the GPS antenna unit with dimensions 46mm x 38mm.
Figure 3: Dimensions of the GPS antenna unit (46mm x 38mm).

3. Scope of Application

This product is suitable for car navigation devices, DVRs, and other compatible in-vehicle positioning terminals equipped with a GPS SMA male connector. It is not compatible with devices that have non-SMA connectors or mismatched connector specifications.

Image showing various application scenarios for the GPS antenna, including factories, car shops, bus stations, and driving schools.
Figure 4: Antennas are widely used in various vehicle-related settings.
Image emphasizing stable signal reception in various conditions, showing vehicles in different weather and environments.
Figure 5: High-quality GPS antenna equipment ensures stable signal reception even in bad weather.

4. Installation and Usage Steps

4.1. Preparation

  • Turn off the power of the in-vehicle navigation/DVR before installation to avoid interface damage or equipment malfunction caused by hot plugging.

4.2. Interface Connection

  • Align the SMA female connector of the antenna with the GPS SMA male connector on the device.
  • Rotate it clockwise until it is firmly attached.
  • Ensure the connection is secure (do not over-tighten to avoid thread stripping).

4.3. Antenna Fixing

  • Select an installation location inside the vehicle with an unobstructed signal. Preferred locations include:
    • Below the front windshield on the dashboard.
    • Upper right corner of the front windshield (avoiding areas with metallic film).
    • An unobstructed area on the exterior roof.
  • Peel off the adhesive protective film on the back of the antenna.
  • Place the antenna with the labeled side facing the sky.
  • Firmly press it onto the selected location for 10-15 seconds to ensure secure adhesion.
Image showing the adhesive backing of the GPS antenna, noting 'NO Magnetic'.
Figure 6: Adhesive backing for secure mounting (non-magnetic).

4.4. Cable Routing

  • Route the antenna cable neatly along the interior trim gaps of the vehicle.
  • Avoid pinching the cable by doors or seats to prevent damage.

4.5. Startup and Debugging

  • After installation, turn on the power of the in-vehicle navigation/DVR.
  • Enter the GPS positioning settings interface of the device and wait for it to search for satellite signals. (First-time positioning or after antenna replacement may take 1-3 minutes, which is normal.)
  • When the device displays a sufficient number of satellites and accurate positioning, it is ready for normal use.

5. Important Notes

  • Connector Matching: This product has an SMA female connector and is only compatible with devices with SMA male connectors. Confirm your device's connector specifications before purchase to avoid incompatibility.
  • Installation Environment: Install the antenna away from metal obstructions, in-vehicle radar, high-power electrical appliances, and other interference sources, as these can affect signal reception.
  • Cable Protection: Avoid pulling, bending, or squeezing the antenna cable during daily use to prevent internal core wire breakage. Do not use the product if the cable is damaged.
  • Waterproofing: If installed on the exterior roof, apply waterproof sealing at the connector to prevent rainwater ingress, which could cause short circuits in the antenna or device.
  • Modification Prohibition: Do not disassemble, cut, or modify the antenna or connector specifications. This will invalidate the product and void the warranty.

6. Troubleshooting

Symptom Possible Cause Solution
Device cannot locate Loose connector connection Re-tighten the SMA female connector to ensure good contact
Weak signal, positioning drift Installation location is obstructed Reinstall in an unobstructed area of the front windshield
No satellite signal Damaged cable Check for cable pinching or breakage; replace the antenna if necessary
Slow positioning First use / complex environment Park the vehicle in an open area and wait 1-3 minutes for positioning to complete

7. User Tips

  • For optimal GPS signal reception, always ensure the antenna has a clear line of sight to the sky. Avoid placing it under metallic films or inside enclosed compartments.
  • Regularly check the cable for any signs of wear or damage, especially if it's routed through areas prone to pinching or abrasion.

8. Safety Information

WARNING: Failure to comply with the following safety requirements may result in electric shock, fire, product damage, personal injury or property loss.

8.1. General Safety Guidelines

  • RISK OF ELECTRIC SHOCK: Do not open the product housing; there are no user-serviceable parts inside. Unauthorized disassembly will cause electric shock risk and void the product warranty. All servicing, repair and part replacement must be performed by qualified and authorized technicians only.
  • POWER SUPPLY SAFETY: Use only the manufacturer-specified power supply/charger with the matching model. Damaged power cords/cables (cracks, fraying, exposed wires) must be replaced with original parts immediately; do not continue to use damaged power accessories.
  • OVERHEATING PREVENTION: Do not block the product's ventilation openings (if applicable); do not place the product on soft surfaces (beds, sofas, rugs) that obstruct airflow. Discontinue use immediately if the product feels abnormally hot, emits strange odors or smoke.
  • ABNORMAL USAGE HANDLING: If the product malfunctions (e.g., indicator light flickers abnormally, no response to operation, abnormal noise), unplug the power supply immediately and stop using it. Contact the authorized service center for inspection and repair; do not attempt to repair the product by yourself.
  • BATTERY SAFETY (if applicable): For products with built-in/replaceable batteries, do not short-circuit, crush, puncture or incinerate the battery. Do not recharge non-rechargeable batteries; replace batteries with the same model/specification only.
  • CHILD SAFETY: Keep the product and its small accessories (if applicable, e.g., small buttons, batteries) out of reach of children under 3 years old to prevent choking, electric shock or other accidents.
  • CLEANING SAFETY: Disconnect the power supply before cleaning the product; use a dry, soft cloth to wipe the surface. Do not use water, alcohol, detergent or other chemical cleaners to clean the internal components.
  • EMERGENCY TREATMENT: In case of product fire, cut off the power supply immediately and use a dry powder fire extinguisher to put out the fire (do not use water). In case of electric shock caused by the product, cut off the power first and seek medical attention immediately.

8.2. EU Compliance Statement & Applicable Regulations

This product is in conformity with the essential requirements and other relevant provisions of the European Union's applicable directives and harmonized standards. The manufacturer declares sole responsibility for the compliance of this product.

9. Warranty and Support

9.1. Manufacturer & EU Representative Information

Manufacturer:

  • NAME: Shenzhen Meiteai E-commerce Co., Ltd
  • Address: CN-Building A, Building 201A, No. 8-14 Jinyuan Road, He'ao Community, Yuanshan Street, Longgang District, Shenzhen, 518000

EU Authorized Representative:

  • Name: SUCCESS COURIER SL
  • Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
  • Telephone: +34-910602659
  • Email address: successservice2@hotmail.com

9.2. After-Sales Service

If you encounter any problems during use that cannot be solved by the troubleshooting guide, please contact our online after-sales service team. We will provide you with professional technical support and solutions.

A PDF version of this user manual is available for download from the product page or by contacting customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.