XHDATA D-608WB Emergency Crank Weather Radio

1. Introduction

The XHDATA D-608WB is a multi-functional emergency radio designed for reliability and versatility. It features FM/AM/SW/NOAA band reception, Bluetooth 5.0 connectivity, a powerful flashlight, and multiple charging options including hand crank, solar panel, and USB. It also includes an SOS alarm, TF card MP3 playback, and a phone charging function, making it an essential tool for emergencies and outdoor activities.

Overview of the XHDATA D-608WB's key features.

2. Setup

2.1 Battery Installation

The device is powered by a 3.7V (18650) rechargeable lithium battery. Ensure the positive and negative terminals are correctly aligned when installing the battery into its compartment.

2.2 Initial Charging

Before first use, fully charge the radio using one of the available methods:

• USB Charging: Connect the supplied USB charging cable to a DC5V USB output adapter (1A recommended) and plug the other end into the Type-C input jack on the radio. The charging symbol will flash on the display until fully charged.
• Hand Crank: Pull out the hand crank rocker arm and rotate it to generate power.
• Solar Panel: Place the radio with its solar panel facing direct sunlight.

Four ways to power and charge your XHDATA D-608WB radio.

2.3 Antenna

For optimal reception, extend the rotatable long antenna when listening to FM and Shortwave bands. Adjust the antenna angle for the best signal. When using MW (Medium Wave) or LW (Long Wave), rotate the entire body of the radio for optimal reception sensitivity.

3. Operating Instructions

3.1 Power On/Off

• Power On: Short press the power button. The display will show "ON".
• Power Off: Short press the power button. The display will show "OFF".

3.2 Radio Operation

The radio features FM, MW (AM), SW, and WB (Weather Band) reception.

The radio supports multiple frequency bands for diverse listening options.

1. Select Band: Short press the BAND key to cycle through FM, MW, SW, and WB bands.
2. Frequency Coverage Setting (in shutdown state):
   • Long press the BAND key to switch FM receiving frequency ranges (64-108MHz, 76-108MHz, 87-108MHz, 87.5-108MHz).
   • For 64-108MHz/76-108MHz/87-108MHz FM, MW is set to 522-1620KHz (9K) for Asia, Europe, Africa, Oceania. Temperature displays in Celsius (°C).
   • For 87.5-108MHz FM, MW is set to 520-1710KHz (10K) for North and South America. Temperature displays in Fahrenheit (°F).
3. Search Radio Frequency:
   • Manual Scan (VF): Short press the VM/VF key, then slowly or quickly turn the TUNING knob.
   • Automatic Browse (VF): Long press the SCAN button. It will stop for 15 seconds on each scanned station. Short press SCAN to stop or continue.
   • Fully Automatic Scanning (ATS): Long press the ATS key to automatically scan and store all radio stations in the current band.
   • Shortwave Single Meter Band Search: Double-click the ATS key in shortwave receiving state to scan and memorize the current meter band.
4. Store Radio Stations:
   • Manually: Select band, rotate TUNING to desired frequency, short press M (Memory) button (station number flashes), then short press M again to store.
   • The radio can store up to 500 stations (100 FM, 100 MW, 300 SW).
5. Recall Stored Radio Stations (VM):
   • Short press the VM/VF key to enter memory radio mode. Turn the TUNING knob to recall stations.
   • Automatic Browsing: Select band, short press VM/VF, then long press SCAN. It will play each station for 5 seconds. Press SCAN to select or continue.
6. Delete Stored Radio Stations:
   • Single Station: Enter memory radio mode (VM/VF), select station with TUNING, press and hold MEY/DEL for 3 seconds (display shows [DEL]), then short press again to confirm.
   • All Stations in Current Band: Enter memory radio mode (VM/VF), select band, press and hold MEY/DEL until (ALL) displays, release, then short press again to confirm.

3.3 WB/NOAA Weather Warning

The radio supports 7 NOAA channels (162.400-162.550MHz) for weather alerts.

The radio is equipped with 7 NOAA scan alert channels and an SOS alarm for emergencies.

1. Manual Search: Short press power to ON, short press BAND to WB, turn TUNING to adjust frequency.
2. Automatic Scan & Warning: Short press power to ON, short press BAND to any radio band. Long press ALERT to enter NOAA automatic scanning warning state. Upon a disaster warning, the radio will emit an SOS sound and light warning.
3. Eliminate Warning: Long press ALERT to stop the SOS warning signal and enter NOAA voice warning information reception.

3.4 Bluetooth/MP3 Playback

Seamless Bluetooth 5.0 connectivity for audio streaming.

1. TF Card MP3 Player: Insert a TF card with music files. Short press the M key to enter TF card MP3 playback state. Use the previous/next song keys or TUNING knob to navigate. Long press BAND to toggle single loop/all loop playback.
2. Bluetooth Music Playback: Short press the BT key to enter Bluetooth playback state. On your mobile phone, search for "D-608WB" and connect. Use the radio's previous/next song keys or TUNING knob, or control directly from your phone.
3. Wireless Calling: When connected via Bluetooth, short press the /ATS key to answer a call, and short press again to end it.
4. Bluetooth Forced Disconnection: Press and hold the /ATS button for 3 seconds to disconnect. Long press again to reconnect.

3.5 Flashlight and Reading Lamp

The radio features a flashlight and reading lamp with adjustable brightness.

• Flashlight (TORCH): Short press the TORCH button to turn on. Repeatedly press to cycle through 3 brightness levels and turn off.
• Reading Lamp (LAMP): Short press the LAMP button to turn on. Repeatedly press to cycle through 3 brightness levels and turn off.

3.6 SOS Danger Distress Signal

In any state, long press the SOS button to activate the synchronized sound and light distress signal. Press and hold again to turn it off.

3.7 Display Settings

• Display Content Switch: In any state, short press the ALERT/DISPLAY key repeatedly to cycle the secondary display area content between temperature (Celsius/Fahrenheit), signal strength/signal-to-noise ratio, alarm time, local time, and memory radio frequency number.
• Display Backlight Switch: Press any button to light up the display for 5 seconds. It will turn off automatically.

3.8 Time and Alarm Functions

1. Set Clock: In power-off state, press and hold the M key. The clock will flash. Turn the TUNING knob to adjust hours, short press to confirm, adjust minutes, then short press to confirm.
2. Sleep Timer: Long press the power button until the sleep icon flashes. Turn the TUNING knob to select a shutdown time (01-120 minutes). It will flash for 3 seconds to confirm. To cancel, long press power, turn TUNING to ON.
3. Alarm Function:
   • Turn On/Off: Short press the M key; the alarm icon will light up (ON) or turn off (OFF).
   • Adjust Alarm Time/Duration (in power-off state): Press and hold the M key. The time in the secondary display area flashes. Rotate TUNING to adjust hours, confirm, then minutes, confirm. The main display area will then show flashing alarm duration (0-60 minutes). Rotate TUNING to select, then short press to confirm.
   • Alarm Source (Radio/TF Card): Set the desired radio frequency or insert a music TF card and enter TF card playback mode. Adjust volume. Press and hold the M key; the alarm icon will flash for 3 seconds and confirm.
   • After Alarm: Short press the power button twice to turn off the machine. Short press the /ATS key to cancel radio/music alarm lock frequency.

3.9 Keyboard Lock

Press and hold the LOCK/LAMP button for 5 seconds to lock the keyboard and TUNING knob. The lock icon will light up. Press and hold for another 5 seconds to unlock.

4. Maintenance

4.1 Safe Use of Lithium Batteries

• Only use 18650 3.7V rechargeable lithium batteries of the same and equivalent specifications. Improper use may cause explosion.
• Do not charge non-rechargeable batteries.
• Do not place batteries in high-temperature environments, moisture, or near explosive/flammable materials.
• Do not disassemble, impact, or knock the lithium battery. If the battery is deformed or bulged, discontinue use.
• Use a safe and qualified adapter for charging.
• If the machine is not used for a long time, charge the lithium battery at least once every three months to maintain its service life.

4.2 Mobile Phone Emergency Charging

The radio can charge mobile phones via its USB 5V output port in an emergency. However, avoid using the radio function simultaneously during emergency charging, as the boost circuit operation may cause serious interference to radio reception.

5. Troubleshooting

• System Malfunctions: In rare situations (e.g., accidental interference, button malfunctions, display confusion), use a sharp object to press the RESET switch hole to reset the system.
• Poor Radio Reception: Radio signals can be affected by season, weather, environment, electromagnetic interference, and antenna angle. Frequently update ATS memory for optimal performance. Adjust the antenna angle and radio body position for better signal.
• Charging Interference: To avoid interference during charging and insufficient charging current, do not use the radio in the early stages of charging.
• Tuning Knob Unresponsive: If the tuning knob becomes stiff or unresponsive, try a system reset. If the issue persists, contact support.

6. Specifications

7. User Tips

• Battery Type: The radio uses a single 18650 lithium-ion battery, which is a common and convenient rechargeable battery type.
• Bluetooth Compatibility: The Bluetooth 5.0 module offers good compatibility and sound quality, connecting well with various devices like smartwatches.
• Solar Charging: The solar panel can provide a trickle charge even in cloudy conditions, helping to maintain battery levels.
• Headphone Use: For private listening, use the 3.5mm headphone jack. Note that stereo output may not be available if the radio signal is weak or in mono mode.
• Flashlight Brightness: The flashlight has three brightness levels, providing versatile illumination for different situations.

8. Warranty & Support

For technical support, inquiries, or warranty information, please contact XHDATA through the following channels:

• Skype: radiwow
• Email: xhdatacn@gmail.com
• Facebook: XHDATA
• Website: https://www.xhdata.com.cn
• Whatsapp: +86 18025193267

This product is manufactured in Mainland China and holds CE and WEEE certifications.

9. Product Video Overview

Watch this official video for a visual guide to the XHDATA D-608WB's features and functions.

10. Additional Resources

A detailed user manual in PDF format is available for download. This document contains comprehensive instructions and diagrams for advanced users.

Reference: XHDATA D-608WB User Manual (PDF)