1. Introduction
Thank you for choosing the UPERFECT 15.6" Wireless Portable Monitor. This monitor is designed to enhance your productivity and entertainment on the go, offering a 1080P IPS display, an 8000mAh built-in battery, and versatile connectivity options. Please read this manual carefully to ensure safe and proper use of the product.

2. Package Contents
Please check the package contents upon unboxing. If any items are damaged or missing, please contact support@uperfect.com immediately.
- 1 × 15.6 Inch Wireless Monitor
- 2 × Type-C to Type-C Cables
- 1 × Mini HDMI to HDMI Cable
- 1 × Power Adapter (PD18W)
- 1 × Instruction Manual (this document)
- 2 × M4*4mm VESA Screws

3. Product Overview
3.1 Interface Functions

- A&B: Type C 3.1 Port: Full-featured Type C port for signal and power transmission.
- C: Mini HDMI Port: For audio and video signal transmission.
- D: Menu/Open Button: Press to enter the OSD (On-Screen Display) menu.
- E: + Port: Increases volume or brightness, and is used to increase selection in the OSD menu.
- F: - Port: Reduces volume or brightness, and is used to reduce selection in the OSD menu.
- G: Exit Port/Return: Press to return to the previous operation in the OSD menu.
- G: HP (Headphone Jack): For audio output to headphones.
3.2 Built-in Folding Stand
The monitor features a strong 180-degree built-in folding stand, allowing for multi-view adjustment from 0 to 180 degrees to match your preferred viewing angle.

4. Setup and Connection
4.1 Wired Connection
To connect the monitor via a wired connection:
- Prepare the necessary connection cables (USB-C to USB-C or Mini HDMI to HDMI).
- Press the power button once; the power indicator light will illuminate.
- Press the 'Back' button once. Four signal sources (TYPE C1, TYPE C2, HDMI, MiraCast) will appear on the screen.
- Select the signal source corresponding to the type of device you are connecting.
Connecting to Phone (USB-C)
Use a USB-C to USB-C cable. It is recommended to connect a power cord when connecting to a mobile phone to ensure stable operation.
- Note: Ensure the USB-C port on your phone supports signal output. If your iPhone is an iPhone 14 or earlier, a Lightning to HDMI adapter and HDMI to Mini HDMI cable are required.
Connecting to USB-C Laptop
Use a USB-C to USB-C cable. Please connect an external power supply when the monitor indicates low battery. Ensure your device's USB-C port supports full functionality output (Thunderbolt 3 or USB 3.1).
Connecting to Other Devices (HDMI)
For devices like gaming consoles (Nintendo Switch, Xbox, PS4/PS5) or other HDMI-enabled devices, use an HDMI to Mini HDMI cable. Please connect an external power supply when the monitor indicates low battery. For game devices, the touch function is unsupported.
Compatible Devices for Single Type-C Cable (Display & Power)
Laptops supporting Thunderbolt 3 or USB 3.1:
- For Apple: MacBook Pro (Late 2016) and newer, MacBook Air (Late 2018) and newer
- For Huawei: MateBook D/X/X Pro/E/13, MagicBook
- For ASUS: ZenBook, U4100UN, U5100UQ, ROG Series
- For HP: EliteBook Folio G1, Spectre 13, Zbook Studio
- For Dell: G3/G5/G7 Series, Inspiron 5000/7000 Series, XPS12/13/15
- For Lenovo: Thinkpad E580/T470/T470s/T480/T480s/X1 Carbon (2017-2019)
- For MIUI: Air 12.5"/13.3", Pro 15.6", MI Game NoteBook
- For Google: ChromeBook Pixels
- For Razer: Blade Stealth Series (All)
- For Microsoft: Surface Book 2
- Others: Acer Swift 5, MSI GS60 6QE, Gigabyte Aero 15x/15 x9/15 y9
Note: If your device is not listed, please use a mini HDMI cable instead.
Mobile Phones supporting USB 3.1:
- For Samsung: Galaxy S8, S8+, S9, S9+, S10, S10+, S10e, S20, S20+, S20 Ultra, S21, S21+, S21 Ultra, S22, S22+, S22 Ultra, Note 8, Note 9, Note 10
- For Huawei: P50 Pocket/40 Pro/40/30/20/10/9 Series, Mate X/Xs/X2/40 Pro/40/30/20/10/9 Series, Honor Note 10, Honor Magic V/3/Pro/Pro+/4/4 Pro/4 Ultimate
- For SONY: Xperia 1 / 1 II/1 III/1 IV/5/5 II/5 III/10 III/Pro/Pro-I
- For OnePlus: 7/7 Pro/8/8 Pro/9/9R/9 Pro
- For OPPO: Find X3 Pro/Reno 10x Zoom/Reno 5G/R17 Pro (OPPO RX17 Pro in Europe)
- For LG: V60/V50/V40/V35/V30/V30+/V20 Series, G8/G7/G6/G6+(with Dec 2018 update)*functionality has not been tested*/G5 Series, Q8
- For HTC: 10/U Ultra/U11/U11+/U12+/U19e, Exodus 1
- For ASUS: ROG Phone/Phone II/Phone 3/Phone 5/Phone 5s Series, ZenFone 3 Ultra, ZenFone AR, ZenFone Ares
- For Motorola: Edge+/Edge S (China variant)/Moto G100 (global version for European market)/ Edge 20 Pro/30 Pro(global variant)/X30
- For Xiaomi: Black Shark 2/3/4
- For ZTE: Axon 9 Pro/10 Pro, Nubia Red Magic 6S Pro/7/7 Pro
- Others: BlackBerry Key2, BQ Aquaris X2, Essential Phone, Fairphone 4, Lenovo Legion Phone Duel/2 Pro/Duel 2, NOKIA 9 PureView, Microsoft Lumia 950/950 XL, HP Elite x3, Razer Phone/Phone 2, Fairphone 4
Note: If your device is not listed, please use an iOS/Android to HDMI Adapter for connecting.
4.2 Wireless Connection
The monitor supports wireless display mirroring via Miracast/AirPlay. Ensure your device has WiFi enabled.
Connecting to iOS (AirPlay)
- Ensure your iOS device has WiFi turned on.
- Swipe down from the top-right corner to open Control Center.
- Choose 'Screen Mirroring'.
- Select "XXXXXX_P2P" from the device list.
Note: If a password is required, enter '1234'. Please connect an external power supply when the monitor indicates low battery.
Connecting to macOS (AirPlay)
- Ensure your macOS device has WiFi turned on.
- Click the Screen Mirroring icon on the menu bar.
- Choose 'Screen Mirroring'.
- Select "XXXXXX_P2P" from the device list.
Note: The product device number can be found on the monitor's startup page. If a password is required, enter '1234'. Please connect an external power supply when the monitor indicates low battery.
Connecting to Android (Miracast)
For Motorola, Samsung, Google, OnePlus, LG, etc.:
- Ensure your Android device has WiFi turned on.
- Swipe down the notification panel and expand the Quick Settings.
- Select 'Tap Cast/Smart View/Screen Share'.
- Select "XXXXXX_P2P" from the device list.
Note: Please connect an external power supply when the monitor indicates low battery.
Connecting to Windows (Miracast)
- Ensure your Windows device has WiFi turned on.
- Press the Win+K keys simultaneously.
- Select "XXXXXX_P2P" from the device list.
Note: The device number can be found on the monitor's startup page. Please connect an external power supply when the monitor indicates low battery.

5. Operating the Monitor
5.1 On-Screen Display (OSD) Menu Introduction
The OSD menu allows you to adjust various display settings. Use the Menu/Open button to enter the OSD, and the + / - buttons to navigate and adjust settings. The Exit button returns to the previous menu.
Brightness
- Brightness: Adjusts the overall screen brightness (0-100).
- Contrast: Adjusts the contrast level (0-100).
- ECO: Selects different display modes (Standard, Game, Movie, Text, FPS, RTS).
- DCR: Dynamic Contrast Ratio (ON/OFF).
- Sharpness: Adjusts image sharpness (0-10).
Image
- Aspect: Adjusts the aspect ratio (Wide, 4:3).
Color Temp.
- Color Temp: Selects color temperature presets (Warm, Cool, User).
- User: Allows manual adjustment of Red, Green, and Blue color levels (0-100).
OSD Setting
- Language: Selects the OSD menu language.
- OSD H. POS: Adjusts horizontal position of the OSD menu (0-100).
- OSD V. POS: Adjusts vertical position of the OSD menu (0-100).
- OSD Timer: Sets the OSD menu display duration (0-60 seconds).
- Transparency: Adjusts the transparency of the OSD menu (0-100).
Reset
- Reset: Resets all settings to factory defaults.
- HDR Mode: High Dynamic Range mode (OFF, Auto, 2084).
Misc.
- Signal Source: Manually selects the input signal source (HDMI, Type-C1, Type-C2).
- LowBlueLight: Reduces blue light emission (0-100).
- Volume: Adjusts the speaker volume (0-100).

5.2 Gravity Sensing and Orientation
The monitor features a high-precision gravity sensor. When connected to a mobile phone, the screen will automatically rotate to match the display's orientation, providing a seamless viewing experience without manual adjustments.
5.3 Multi-Touch Operation
For compatible devices connected via USB-C, the monitor supports 10-point multi-touch operation, allowing for intuitive interaction with your content.
6. Maintenance
To ensure the longevity and optimal performance of your UPERFECT portable monitor, please follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen cleaner to wipe the screen. Avoid using harsh chemicals, abrasive cleaners, or aerosol sprays directly on the screen.
- Storage: When not in use, store the monitor in a cool, dry place away from direct sunlight and extreme temperatures. Use the magnetic leather case to protect the screen from scratches and dust.
- Handling: Handle the monitor with care. Avoid dropping it or subjecting it to strong impacts. Do not place heavy objects on top of the monitor.
- Power: Always use the provided power adapter. Disconnect the power cable during thunderstorms or when unused for extended periods.
- Ventilation: Ensure proper ventilation around the monitor to prevent overheating. Do not block the ventilation openings.
7. Troubleshooting
If you encounter any issues, please refer to the solutions below. If the problem persists, contact support@uperfect.com.
7.1 Connection Issues
- Wireless Connection Unsuccessful:
- Check if the device signal input source is selected as MIRACAST.
- Restart the wireless monitor and try connecting again.
- Fully restart your source device (e.g., laptop, phone) and reconnect.
- Wired Connection Issues:
- Ensure the monitor and computer are in "ON" mode.
- Verify that cables are properly connected to both the monitor and the computer.
- Confirm that you are connected to a full-featured USB-C port or HDMI port for audio and video transmission.
- Check if the monitor's battery is low. If so, use a power cord for additional power input.
- Try connecting the monitor to other devices to check if it functions.
7.2 Display Issues
- "No Signal" or "Power Saving" Message:
- Check if your device is working correctly when wired.
- Ensure cables are securely plugged in; re-plug them if necessary.
- Try replacing the cable with a new one.
- Confirm that you are connecting to a full-featured USB-C port or HDMI port for audio and video transmission.
- Screen Signal Poor or Flickers:
- Ensure you are using the adapter that came with the monitor, as other adapters may provide insufficient voltage.
- If flickering persists, try swapping the HDMI cable.
7.3 Compatibility Notes
- USB-C Port Compatibility: The USB-C port on your PC/Laptop must support audio and video signal transmission (Thunderbolt 3/4 or Type-C 3.1 ports). If not, a "Type-C to HDMI" adapter is required.
- Touch Functionality: For gaming devices (Nintendo, XBOX, PS4, etc.) connected via HDMI, the touch function is unsupported.
8. Specifications
| Feature | Specification |
|---|---|
| Screen Size | 15.6 Inches |
| Resolution | 1920x1080 (FHD) |
| Refresh Rate | 60 Hz |
| Panel Type | IPS |
| Display Ratio | 16:9 |
| Viewing Angle | 178° (Horizontal & Vertical) |
| Contrast Ratio | 1500:1 |
| Brightness | 400 cd/m² |
| Color Gamut | 100% sRGB |
| Color Depth | 8 bit (16.7M colors) |
| Response Time | 30ms (Black and White: 10ms) |
| Pixel Pitch | 0.26mm |
| High-Dynamic Range | HDR400 |
| Refresh Rate Sync Technology | AMD FreeSync |
| Screen Surface | MATT |
| Screen Curvature | NONE |
| Built-in Battery | 8000mAh |
| Charging Time | 2-3 hours |
| Working Time (Battery) | 3-4 hours (up to 5 hours at standard brightness) |
| Rated Power | 8W |
| Touch Screen | Yes (10-point multi-touch, for compatible devices) |
| Gravity Sensor | Yes |
| VESA Compatibility | 75x75mm @ M4*4mm |
| Built-in Speaker | Yes, 2*8Ω 1W |
| Product Size | 355 × 210 × 12 mm (13.98 × 8.27 × 0.4 inch) |
| Interfaces | 1 × Full-Featured USB Type-C (Audio & Video Input), 1 × USB Type-C (Power Input), 1 × Mini HDMI (Audio & Video Input), 1 × 3.5mm AUX (Audio Output) |
| Certifications | CE, FCC, RoHS, PSE |
| Launch Date | 2022 |
9. User Tips
- For optimal performance, always use the provided power adapter.
- When connecting wirelessly, ensure your device's WiFi is active and select the correct signal source (Miracast/AirPlay).
- If experiencing screen flickering, try a different HDMI cable or ensure the power adapter is correctly connected.
- The monitor's gravity sensor provides automatic screen rotation when connected to mobile devices, enhancing usability.
- The 10-point multi-touch feature is highly responsive for compatible devices, offering an intuitive user experience.
10. Warranty and Support
UPERFECT offers a 12-month warranty for this product. We are committed to providing professional technical support and ensuring customer satisfaction.
For any queries, problems, or support needs, please contact us via email at support@uperfect.com.
You can also refer to the full user manual in PDF format for more detailed information: User Manual (PDF)