elough Wireless WiFi Repeater 300Mbps

Contents

elough 300Mbps Wireless WiFi Repeater User Manual

Model: Wireless WiFi Repeater 300Mbps

1. Introduction

Thank you for choosing the elough 300Mbps Wireless WiFi Repeater. This device is designed to extend your existing Wi-Fi coverage, eliminate dead zones, and provide a stable wireless connection throughout your home or office. It supports 2.4GHz networks with speeds up to 300Mbps and can operate in Repeater or Access Point (AP) modes.

elough 300Mbps Wireless WiFi Repeater with four antennas
Figure 1: elough 300Mbps Wireless WiFi Repeater

2. Package Contents

Please check the package contents upon opening. If any items are missing or damaged, please contact your retailer.

  • 1 x elough 300Mbps Wireless WiFi Repeater
  • 1 x User Manual (this document, or a printed version)
Product packaging showing the WiFi repeater in its box
Figure 2: Product and Packaging

3. Product Features and Overview

The elough WiFi Repeater is equipped with advanced features to enhance your network experience:

  • High Speed: Up to 300Mbps on the 2.4GHz band.
  • Dual Functionality: Supports Repeater (Extender) and Access Point (AP) modes.
  • Enhanced Coverage: Four external omnidirectional antennas for improved signal transmission and reception, extending coverage by up to 150m.
  • Wired Connectivity: Two LAN ports allow you to connect wired devices like PCs or gaming consoles, turning wireless signals into wired connections.
  • Powerful Performance: Features a triple chip design for stable operation and efficient heat dissipation.
WiFi Repeater with two Ethernet cables connected to its LAN ports
Figure 3: Wireless to Wired Connectivity
WiFi Repeater on a wall with text indicating 4 antennas, signal through wall, antenna rotation, and wide coverage
Figure 4: Enhanced Antenna Design and Coverage
Close-up of a CPU chip with text 'Powerful Triple Chip' and details about heat dissipation
Figure 5: Powerful Triple Chip for Stable Performance

4. Setup Guide

This section provides detailed instructions for setting up your WiFi Repeater. You can configure the device using a mobile phone or a computer via a web browser.

Quick Installation Steps:

  1. Power On: Plug the WiFi Repeater into a power outlet near your main router. Wait for the power indicator light to turn on.
  2. Connect to Repeater WiFi: On your mobile phone or computer, search for available Wi-Fi networks and connect to the network named "Repeater-xxxxxx" (where xxxxxx are the last 6 characters of the repeater's MAC address).
  3. Access Setup Page: Open a web browser (e.g., Chrome, Firefox, Safari) and enter 192.168.11.1 in the address bar. If the setup page does not appear automatically, try forgetting the Wi-Fi network on your device, turning Wi-Fi off and on again, then reconnecting to "Repeater-xxxxxx" and re-entering the IP address.
  4. Select Mode: On the setup page, you will be prompted to choose between "Repeater Mode Settings" or "AP Mode Settings". Follow the instructions for your desired mode below.

4.1. Wi-Fi Repeater Mode Setup (Extender)

This mode extends your existing Wi-Fi signal wirelessly.

  1. Step 1: Click "Repeater Mode" to enter the network search page.
  2. Step 2: The repeater will scan for available Wi-Fi networks. Select the wireless signal you want to extend from the list. If your network is hidden, you may need to add it manually.
  3. Step 3: Enter the password for your main router's Wi-Fi network and click "NEXT".
  4. Step 4 (Optional): You can choose to modify the extended Wi-Fi network's name (SSID). If you do not check this option, the extended network will have the same name as your router's network with "_EXT" appended, and the password will be the same as your router's.
  5. Step 5: Click the "Finish" button to complete the configuration. The repeater will restart.
  6. Step 6: Once restarted, connect your devices to the new extended Wi-Fi network.

4.2. AP Mode Setup (Access Point)

This mode converts a wired internet connection into a wireless Wi-Fi hotspot.

  1. Step 1: Click "AP Mode" to enter the setting page.
  2. Step 2: Set the wireless name (SSID) and password for your new Wi-Fi network. The password should be at least 8 characters long.
  3. Step 3: Click the "Finish" button to complete the AP mode configuration. The repeater will restart.
  4. Step 4: Connect an Ethernet cable from your main router (or modem) to one of the LAN ports on the WiFi Repeater.
  5. Step 5: Once restarted, connect your devices to the new Wi-Fi network you just created.
Detailed setup guide showing working mode diagrams and quick installation steps with mobile phone screenshots
Figure 6: Working Mode Diagram and Quick Installation Guide

5. Operating Modes

The elough WiFi Repeater supports two primary operating modes:

5.1. Repeater Mode (Wireless Signal Extender)

In this mode, the device acts as a wireless signal booster, extending the coverage of your existing Wi-Fi network. It receives the Wi-Fi signal from your main router and re-broadcasts it, effectively expanding your network's reach.

  • Wireless Extension: Extends your Wi-Fi signal without needing any network cables connected to the repeater itself (except for power).
  • Wired Client Extension: You can also connect wired devices (like a PC or smart TV) to the repeater's LAN ports, allowing them to access the internet via the extended Wi-Fi signal.

5.2. AP Mode (Access Point)

In AP mode, the device functions as a wireless access point. It connects to your main router or modem via an Ethernet cable and then broadcasts its own Wi-Fi network. This is useful for creating a new Wi-Fi network in an area with only wired internet access, or for improving Wi-Fi coverage in a specific spot by providing a dedicated access point.

Diagram showing WiFi coverage extension in a house
Figure 7: Improved Signal Coverage

6. Maintenance

To ensure optimal performance and longevity of your WiFi Repeater, follow these maintenance guidelines:

  • Cleaning: Gently wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Placement: Place the device in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Avoid placing it near large metal objects or other electronic devices that may cause interference.
  • Firmware Updates: Periodically check the manufacturer's website for firmware updates. Keeping your device's firmware up-to-date can improve performance and security.
  • Resetting the Device: If you encounter persistent issues or wish to reconfigure the device from scratch, you can perform a factory reset. Typically, this option is available within the web management interface (192.168.11.1) under System Tools or System Settings. Consult the online PDF manual for specific instructions if needed: User Manual (PDF).

7. Troubleshooting

If you experience problems with your WiFi Repeater, try the following solutions:

7.1. Cannot Connect to "Repeater-xxxxxx" Wi-Fi

  • Ensure the repeater is powered on and the power indicator is lit.
  • Try unplugging and replugging the repeater.
  • Restart your mobile phone or computer.

7.2. Cannot Access the Setup Page (192.168.11.1)

  • Verify that your device is connected to the repeater's Wi-Fi network ("Repeater-xxxxxx").
  • Try a different web browser.
  • Clear your browser's cache and cookies.
  • Ensure you have typed the IP address correctly (192.168.11.1).
  • Temporarily disable any VPN or firewall software on your computer.

7.3. No Signal Extension or Slow Speed

  • Placement: Move the repeater closer to your main router. Ensure it's within a good signal range of the main router but also close enough to the area where you need extended coverage.
  • Interference: Avoid placing the repeater near devices that emit strong electromagnetic interference (e.g., microwaves, cordless phones).
  • Main Router Signal: Ensure your main router is providing a strong and stable signal.
  • Reconfigure: Try reconfiguring the repeater from scratch, ensuring you enter the correct password for your main Wi-Fi network.

7.4. Unstable Connection / Frequent Disconnections

  • Interference: As above, check for sources of interference.
  • Channel Overlap: If many Wi-Fi networks are in your area, they might be using the same channel. Try changing the Wi-Fi channel on your main router (consult your router's manual).
  • Firmware: Ensure your repeater has the latest firmware.
  • Reset: Perform a factory reset and reconfigure.

7.5. Third Light Not On / No Signal Indication

  • This usually indicates a poor or no connection to the main router.
  • Ensure the repeater is configured correctly and has successfully connected to your main Wi-Fi network.
  • Move the repeater closer to your main router.
  • Check the main router's Wi-Fi signal strength.

8. Specifications

Brand Nameelough
Wireless Communication Standard802.11.n
Wireless Transmission Rate300 Mbps (2.4G)
Wi-Fi Supported Frequency2.4G
Frequency Band ClassSingle-Band
Wired Transfer Rate100Mbps
LAN Ports2
Supports WPSYes
FunctionFirewall
With Modem FunctionNo
CertificationCE
ApplicationHome
Package Dimensions (L x W x H)19 cm x 9 cm x 8 cm
Package Weight0.16 kg

9. User Tips

  • 2.4GHz Only: This repeater operates exclusively on the 2.4GHz Wi-Fi band. It does not support 5GHz networks. Ensure your main router's 2.4GHz band is enabled.
  • Optimal Placement: For best results, place the repeater halfway between your router and the area where you need improved Wi-Fi. Ensure it receives a good signal from your main router.
  • Security: Always set a strong, unique password for your Wi-Fi networks to protect your privacy and prevent unauthorized access.
  • Smartphone Setup: The setup process is straightforward and can be easily completed using a smartphone.
  • Speed Expectations: While rated for 300Mbps, actual speeds can vary significantly due to factors like distance, interference, and the speed of your internet connection. Repeaters typically reduce throughput compared to a direct connection.
  • DHCP Note: This device may not provide DHCP services in all configurations. In Repeater mode, it typically relies on your main router for IP address assignment.
  • Antennas: The four external antennas are designed to be fixed and are not intended to be removed or replaced with third-party antennas.
  • Advanced Users (OpenWRT): For advanced users, this device may be compatible with custom firmware like OpenWRT (specifically versions up to 19.07 for AR71xx based devices with 4MB flash). Proceed with caution as flashing custom firmware can void your warranty and potentially brick the device if not done correctly.

10. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the seller or manufacturer's official website. You may also find additional details in the comprehensive PDF user manual available online: User Manual (PDF).

© 2024 elough. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.