Teschev Portable EV Charger 16A Type1/Type2

Contents

Teschev Portable EV Charger Operation Manual

Model: Portable EV Charger 16A Type1/Type2

1. Introduction

This manual provides essential information for the safe and efficient operation of your Teschev Portable EV Charger. This Level 2 portable EV charger is designed for electric vehicles, offering flexible charging options with adjustable current settings and a timer function. Please read this manual thoroughly before use and retain it for future reference.

The charger supports various connector types including Type 1 (SAE J1772), Type 2 (IEC62196), and GBT, making it versatile for different electric vehicle models. It operates at 220V-230V AC with a maximum current of 16A and a power output of 3.5kW.

2. Safety Information

To ensure personal safety and prevent electric shock, always observe the following precautions:

  • Ensure the power cord meets national standards and is in good condition.
  • Do not use the charger if the cable or plug is damaged.
  • Do not attempt to open, disassemble, or modify the charger.
  • Keep the charger away from water, heat, and flammable materials.
  • Ensure proper grounding of the power outlet. The charger includes ground protection.
  • Always insert the plug fully into the socket.
  • Supervise children when the charger is in use.

3. Product Overview

3.1 Components

The Teschev Portable EV Charger consists of the following main components:

  • Control Box: Features an LED display and control buttons for setting current and timer.
  • Charging Cable: Connects the control box to the vehicle's charging port.
  • Vehicle Connector: Available in Type 1 (SAE J1772), Type 2 (IEC62196), or GBT, depending on the model.
  • Power Plug: Schuko plug for connecting to a standard wall outlet.
Teschev Portable EV Charger with control box, cable, and plug
Figure 1: Teschev Portable EV Charger Overview
Diagram showing GBT, Type2, and Type1 charging ports
Figure 2: Supported Charging Port Types

3.2 LED Display Details

The control box features an LED display that provides real-time charging information:

  • Rated Current: Displays the selected charging current (e.g., 16A).
  • Charging Status: Indicates if the charger is connected, charging, or in standby.
  • Real-time Power Consumption: Shows the energy consumed (e.g., 3.3KWh).
  • Charging Time: Duration of the current charging session.
  • Real-time Temperature: Internal temperature of the charger (e.g., 28°C).
  • Real-time Charged Power: Instantaneous power delivery (e.g., 3.2kW).
  • Real-time Voltage: Input voltage (e.g., 226V).
  • Real-time Current: Instantaneous current draw (e.g., 15.8A).
  • Signal Voltage: Ground line signal voltage.
Detailed view of the LED display showing charging information
Figure 3: LED Display Information

4. Setup

  1. Unpack the Charger: Carefully remove the charger from its packaging.
  2. Connect to Power Outlet: Insert the Schuko plug into a standard 220V-230V AC wall socket. Ensure the socket is properly grounded. The control box will perform a self-test, indicated by a constant flashing light, then enter standby mode.
  3. Prepare for Charging: Before connecting to the vehicle, you may adjust the charging current or set a timed charge (see Section 5. Operation).
  4. Connect to Vehicle: Open your electric vehicle's charging port cover. Insert the appropriate vehicle connector (Type 1, Type 2, or GBT) firmly into the vehicle's charging port.
  5. Initiate Charging: Once connected, the charger will automatically begin charging or follow the programmed timer settings. The LED display will show the charging status.
Video 1: Demonstration of charger setup and vehicle connection.

5. Operation

5.1 Current Setting

The charger allows you to adjust the charging current (8A, 10A, 13A, 16A) to suit your needs. This setting is saved by the control board.

  1. Ensure the charger is powered on but not yet plugged into the vehicle.
  2. In standby state, press and hold the 'Set up' touch area on the control box for 2 seconds to enter the current setting mode. The corresponding current indicator will flash.
  3. Tap the 'Set up' touch area to cycle through the available current options (8A, 10A, 13A, 16A). The selected current indicator will flash.
  4. Once your desired current is selected, press and hold the 'Set up' touch area for 2 seconds to confirm the setting. The control board will save this value.
  5. You can now plug the charger into your vehicle to begin charging with the selected current.
Control box showing current selection options
Figure 4: Current Adjustment on Control Box

5.2 Timed Charging (Reservation)

You can reserve charging for up to 10 hours, which is useful for off-peak electricity rates.

  1. Ensure the charger is powered on but not yet plugged into the vehicle.
  2. Long press the 'Set up' touch area for 3 seconds to enter the secondary menu.
  3. Select the 'charging reservation time' option.
  4. Long press again for 3 seconds to enter the charging reservation setting.
  5. Press the button to set the desired delay (e.g., 'charge after 1 hour').
  6. Long press for 3 seconds to lock the setting.
  7. Plug the charger into the vehicle. The charger will count down and then automatically begin charging at the reserved time.

6. Maintenance

To ensure the longevity and optimal performance of your Teschev EV Charger, follow these maintenance guidelines:

  • Regular Cleaning: Wipe the charger's exterior and cables with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Cable Inspection: Periodically inspect the charging cable and connectors for any signs of wear, cuts, or damage. Do not use if damaged.
  • Storage: When not in use, store the charger in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the cable is neatly coiled to prevent kinks or damage.
  • Connector Care: Keep the connectors clean and free from dust or debris. Use protective caps if provided.

7. Troubleshooting

The control box LED display indicates various operational statuses and fault codes. Refer to the table below for common indicators and their meanings:

Table 1: Indicator Definition and Action Scheme
Fault Code Green LED Blue LED Red LED Meaning
StandbyOnOffOffReady to charge, no vehicle connected.
ConnectingFlashOffOffVehicle connected, establishing communication.
ChargingOnFlashOffActively charging the vehicle.
End of chargingOffOnOffCharging complete.
E1OffOffFlashes onceOver-temperature protection.
E2OffOffFlashes twiceUnder-voltage protection.
E3OffOffFlashes three timesOver-voltage protection.
E4OffOffFlashes four timesGrounding protection fault.
E5OffOffFlashes five timesTemporary over-current.
E6OffOffFlashes six timesPermanent over-current.
E7OffOffFlashes seven timesLeakage protection fault.
E8OffOffFlashes eight timesRelay adhesion.
E9OffOffFlashes nine timesCP Anomaly.
E10OffOffFlashes ten timesEmergency stop.
E11OffOffFlashes eleven timesSmall current stop.
E12OffOffFlashes twelve timesPlug over-temperature.

Note: The flashing frequency during protection is 0.5 seconds on and 0.5 seconds off. After the specified number of flashes, it flashes again at intervals of 2 seconds.

8. Specifications

Table 2: Product Specifications
Parameter Value
Brand NameTeschev
Charger TypeLevel 2 Portable EV Charger
Voltage220±20%V AC
CurrentAdjustable 8/10/13/16A
Power3.5kW
PhaseSingle Phase
Operating Temperature-25℃~+55℃
Operating Humidity Range3-95%RH
Storage Temperature Range-50℃~+85℃
IP RatingIP66
Total Length3.5 Meters
Weight1.6KG
Timer Function0h~6 Hours Timed Charging (up to 10 hours reservation)

9. User Tips

  • Check Grounding: Always ensure your wall socket has proper grounding for safe operation. The charger's display can indicate if grounding is not detected.
  • Optimize Charging Time: Utilize the adjustable current settings (8A, 10A, 13A, 16A) and the timed charging feature to take advantage of off-peak electricity rates, potentially saving on charging costs.
  • Cable Management: Keep the charging cable neatly coiled when not in use and avoid placing it in high-traffic areas to prevent damage.
  • Extension Cords: If using an extension cord, ensure it is rated for the appropriate voltage and current (e.g., 16A) and meets national safety standards to prevent overheating.

10. Frequently Asked Questions (FAQ)

Q: What is the difference between Type 1 and Type 2 connectors?
A: Type 1 (SAE J1772) is commonly used in North America and Japan, while Type 2 (IEC62196) is standard in Europe and many other regions. This charger is available with either connector type to match your vehicle.
Q: Does this device work without a grounded contact?
A: The charger has ground protection. If your home socket has a ground wire, select "Ground protection". If not, please select "Not ground protection" (default). However, for safety, a properly grounded outlet is always recommended.
Q: Is this charger compatible with a BYD Atto 3 or Nissan Leaf (1st generation)?
A: Compatibility depends on the charging port type of your specific vehicle model (Type 1, Type 2, or GBT). Please verify your car's charging port type and select the corresponding charger variant. For BYD Atto 3, it typically uses Type 2. For Nissan Leaf (1st generation), it typically uses Type 1 (J1772).

11. Warranty and Support

For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.