1. Product Introduction
Thank you for choosing the 4L Automatic Pet Feeder. This smart device is designed to provide convenient and reliable feeding for your pets, ensuring they receive their meals on schedule. It features remote control, scheduled feeding, and app control for a seamless experience.
Product Components:
- Top Cover: Protects the food and houses the desiccant box.
- Desiccant Box: Keeps food fresh and dry.
- Main Body: Contains the food storage and dispensing mechanism.
- Food Channel: Guides food from the dispenser to the bowl.
- Stainless Steel Bowl: Removable bowl for pet food.
- Buttons: Back button for opening the cover, and a feed button for manual dispensing.
- Indicator Lights: For food status and Wi-Fi/Bluetooth connection.
- Bottom Cover: Secures the base of the feeder.
2. Packing List
Please check the contents of your package. If any items are missing or damaged, contact customer support.
- Feeder × 1
- SUS 304 Bowl × 1 (for pro version)
- Cable × 1
- Desiccant × 1
- Instructions Manual × 1
3. Installation Instructions
3.1. Loading Food
- Press the back button on the feeder and open the top cover upward.
- Load dry pet food into the food storage bucket. (Suitable for 4-12mm diameter dry food).
- Close the top cover securely.
3.2. Installing the Desiccant Box
- Open the top cover of the feeder.
- Open the desiccant box.
- Place the desiccant packet inside the desiccant box and close it well.
- Place the desiccant box back into its slot in the top cover.
3.3. Installing the Bowl
- Place the bowl on a flat surface.
- Align the feeder's food channel with the bowl and gently push the feeder down until it is securely attached to the bowl.
3.4. Power Supply Connection
- Insert the charging cable (Type-C) into the charging port located at the bottom of the feeder's mainframe.
- Connect the other end of the cable to a suitable power adapter and plug it into a wall outlet.
The feeder also supports dual power mode with internal batteries (not included, typically 3x D-cell batteries) as a backup. Food will still be distributed as planned during power outages if batteries are installed. Note that batteries are not charged when connected to main power and the app may not connect when running solely on battery power.
3.5. Double Bowl Installation (if applicable)
For models with double bowls, follow these steps:
- Place the plastic bowl holder horizontally. Snap the disc into part A as shown in the diagram.
- Attach plastic bowl holder B from bottom to top.
- The double bowl assembly is complete.
4. Operating Instructions
4.1. Connecting to the APP
The feeder works with the IPETMON, Tuya Smart, or Smart Life apps. Ensure your phone is connected to a 2.4GHz Wi-Fi network.
- Download the app from your device's app store (iOS or Android): search for "IPETMON", "Tuya Smart", or "Smart Life".
- Open the app and register an account if you don't have one.
- Follow the in-app guidelines to add your pet feeder. The app should connect quickly.
4.2. Setting Up the Food Plan (APP)
Once the app is connected, you can set up a detailed feeding schedule:
- Create a grain plan for daily automatic feeding.
- Receive grain status push messages directly to your phone.
- You can control multiple feeders simultaneously using the Smart Life app.
4.3. Manual Feeding
To dispense food manually:
- Press the grain button (located on the side/front of the feeder) twice in a row.
- Each double press will dispense one share of grain.
- You can also add instant grain manually through the app.
4.4. Product Overview Video
5. Indicator Light Status
Understand the meaning of the indicator lights on your feeder:
| Light | Indicator Status | Equipment State |
|---|---|---|
| Wi-Fi/Bluetooth Indicator Light | Green light slow flash | Equipment offline |
| Green light flash | Waiting for connection | |
| Green light on | Device connected | |
| Red light flash | Lack of food | |
| Remaining Food Indicator Light | Both lights flash | Equipment abnormal |
| Red light out | Enough food |
6. Specifications
| Parameter | Value |
|---|---|
| Product Name | SMART PET FEEDER |
| Model | PTM-101 |
| Color | White |
| Size (L×W×H) | 335 × 330 × 177 MM (Single Bowl: 17cm/6.69inch width, 33cm/13inch height, 32cm/12.6inch depth; Double Bowls: 30cm/11.81inch width, 33cm/13inch height, 32cm/12.6inch depth) |
| Capacity | 4L (approx. 17 cups of kibbles, sufficient for one cat for 30 days) |
| Weight | 1310g |
| Material | ABS / SUS 304 / PC |
| Input Parameters | 5V/1A DC |
| Connection Mode | WI-FI / BT |
| Recommended Kibble Size | 0.15-0.5 inches (4-12mm) |
| Recommended Food Types | Dry Food, Freeze-Dried Food, Air-Dried Food, Mixed Food |
7. Important Attention & Safety Guidelines
- It is not recommended for pets less than three months old.
- It is recommended to use the product indoors, keep away from direct sunlight and fire sources.
- Use only the original power adapter. Otherwise, the device may be damaged or may not work correctly.
- This product is strictly prohibited from being soaked in water.
- To prevent pets from tipping over the product, it is recommended to place it in a corner or against a wall.
- Children should use the device under adult guidance.
- Do not soak the desiccant in water. If the desiccant is damaged, do not continue to use it.
- If you move or stop using the product, please unplug the power cord and remove any installed bottom batteries.
- Except for authorized maintenance personnel, do not disassemble or repair the product to avoid accidental injury.
8. Reset Connection
If you need to reset the Wi-Fi/Bluetooth connection:
- Hold down the feed button for 5 seconds.
- The Wi-Fi/Bluetooth indicator light will blink quickly, indicating a successful reset.
9. User Tips
- Easy App Integration: Many users find the feeder connects quickly and easily to the Smart Life app.
- Multi-Feeder Control: The Smart Life app allows you to control multiple feeders simultaneously.
- Voice Control: Some users have successfully integrated the feeder with voice assistants like Siri for convenient control.
- Portion Accuracy: Be aware that portion sizes may have a slight margin of error. One portion is approximately 5 grams, so 5 portions would be around 25-30 grams. Adjust settings as needed for your pet's dietary requirements.
- Battery Backup Limitations: While the feeder supports battery backup, it may not operate according to schedule or connect to the app when running solely on battery power without a Wi-Fi connection. Batteries are for power outage backup, not for continuous app-controlled operation without AC power.
- Food Stealing Prevention: For pets with eating disorders or those prone to trying to access the food storage, consider placing the feeder in a location that limits access to the internal storage or exploring DIY solutions like 3D-printed separators if necessary.
10. Troubleshooting
- Feeder not dispensing food:
- Check the food level in the storage bucket.
- Ensure the feeder is properly connected to power.
- Verify that the food channel is not blocked by kibble.
- Check the app for any error messages or if the schedule is correctly set.
- Refer to the indicator light status table for diagnostics.
- App not connecting to the feeder:
- Ensure your phone is connected to a 2.4GHz Wi-Fi network.
- Make sure the feeder is powered on and within Wi-Fi range.
- Try resetting the feeder's connection (see Section 8).
- Restart your Wi-Fi router and try connecting again.
- Ensure the app is updated to the latest version.
- Inaccurate portion dispensing:
- The feeder dispenses by volume, not exact weight. Adjust the number of portions in the app to achieve the desired total weight.
- Ensure the kibble size is within the recommended range (4-12mm) to prevent jamming or inconsistent dispensing.
- Feeder not working on battery power during outage:
- Ensure fresh D-cell batteries are correctly installed.
- Note that scheduled feeding and app control may be limited or unavailable when running solely on battery power without an active Wi-Fi connection. Battery power is primarily for basic dispensing during AC power loss.
11. Maintenance
- Cleaning: Regularly clean the stainless steel bowl and the food channel to prevent food buildup and maintain hygiene. Use a damp cloth for the main body; do not immerse it in water.
- Desiccant Replacement: Replace the desiccant packet periodically (e.g., every 1-2 months) to ensure food freshness.
- Food Storage: Store dry pet food in a cool, dry place. Ensure the feeder's top cover is always securely closed.
- Battery Check: If using battery backup, check the batteries periodically and replace them if they are low or expired.
12. FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
13. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the retailer where you purchased the product. Keep your purchase receipt as proof of purchase.
For additional information or to view the original PDF manual, please refer to the following document: User Manual (PDF).