Aamasun EU Plug in Night Lamp, US Plug night light

Contents

Aamasun Motion Sensor LED Night Light

Instruction Manual

Brand: Aamasun | Model: EU Plug in Night Lamp, US Plug night light

Introduction

Thank you for purchasing this LED Plug-in Night Light. This manual provides important information for the safe and efficient use of your new night light. Please read all instructions carefully before use and retain this manual for future reference.

This night light features a PIR motion sensor, adjustable brightness, and three color temperature options (Warm White, Cold White, Mixed Light) to suit various indoor environments.

Important Safety Instructions

  • This device is for indoor use only.
  • This device should not be exposed to dripping or splashing water.
  • This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, the device should be replaced.
  • Do not install this device near heat sources.
  • Do not disassemble this device.
  • Do not place any sources of danger on this device (e.g., liquid filled objects, lighting candles).

CAUTION: Risk of electric shock and fire hazard. This product is not a toy and is not intended for use by children. For adult use only. Do not plug in extension cords. Indoor use only. For safe use, plug only into exposed wall outlets where night light is ventilated and cannot contact bed coverings or other material that may present a fire hazard.

Parts Identification

Familiarize yourself with the components of your night light:

Diagram showing the parts of the night light: control button, PIR motion sensor, LED, and European plug.

Figure: Components of the Aamasun Motion Sensor LED Night Light

  • Control Button: Used for adjusting brightness and changing light color.
  • PIR Motion Sensor: Detects motion to activate the light in Auto mode.
  • LED: Provides illumination with more light and no glare.
  • Plug: Available in EU or US plug types for direct wall socket insertion.

Setup

To set up your night light:

  1. Unpack the night light and ensure all parts are present and undamaged.
  2. Plug the LED night light directly into a standard wall socket. It can be plugged in upright or facing downwards, depending on your preference and socket orientation.
Aamasun Motion Sensor LED Night Light plugged into a wall socket next to a bed, emitting a warm glow.

Figure: Night light plugged into a wall socket

Operation

The night light features a slide switch for mode selection and a control button for light adjustments.

Switch Settings (On/Off/Auto)

Diagram showing the three switch modes: Off, On, and Auto (motion sensor).

Figure: Night light switch modes

  • ON mode: Slide the switch to 'On'. The night light will turn on constantly.
  • OFF mode: Slide the switch to 'Off'. The night light will turn off.
  • AUTO mode (Motion Sensor): Slide the switch to 'Auto'. The LED Night Light will automatically turn on when its sensors detect a lack of ambient light and motion. After 30 seconds, it will automatically turn off when motion stops or with an increase in ambient light.

Brightness Adjustment

In ON or AUTO mode, you can adjust the brightness:

  • Long Press Control Button: Perform stepless dimming from 15% to 100% brightness (10-30 lumens). Both brightness and light colors have a memory function.
Diagram illustrating stepless dimming from 0lm to 30lm, showing the night light at 15% and 100% brightness levels.

Figure: Brightness adjustment range

Color Temperature Change

In ON or AUTO mode, you can change the light color:

  • Short Press Control Button: Cycle through Warm White, Cold White, and Mixed Light color temperatures.
Diagram showing the three adjustable light colors: Warm White (3000K), Cold White (6500K), and Mixed Light (5000K), activated by pressing the control button.

Figure: Adjustable light colors

Operation Demonstration Video

Video: Demonstration of plugging in the night light and adjusting its settings.

Specifications

Product parameter diagram showing dimensions (64mm width, 44mm height, 36mm depth, 27mm plug depth) and key specifications.

Figure: Product dimensions and key parameters

Feature Detail
NameMini LED night light
Input VoltageAC110V-240V (Nominal Voltage: 85-265V)
Power0.6W (Wattage: 0-5W)
Brightness / Luminous Flux10~60 Lumens (<60 Luminous Flux)
Ingress Protection LevelIP20
Warm White Color Temperature2700-3000K
Mixed Light Color Temperature4500-5000K
Cold White Color Temperature6000-6500K
Lifespan20000h
Light SourceLED bulbs (included)
Body MaterialABS
CertificationCE, ROHS
ShapeDIY
Battery TypeNONE (Batteries not required or included)
Power GenerationMotion
TypeNight Light
Item TypeNight Lights
Is Smart DeviceNo
Power SourceAC
UseEMERGENCY
Light ColorCold White + Warm White (Adjustable)
Sensor Distance100°; 3-5 metres

Maintenance

  • To clean the night light, wipe it gently with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.
  • Ensure the device is unplugged before cleaning.
  • As the light source is non-replaceable, do not attempt to open or repair the device.

Troubleshooting

If you encounter issues with your night light, please refer to the following common solutions:

  • Light does not turn on:
    • Ensure the night light is securely plugged into a working wall socket.
    • Check the switch position. If in 'Off' mode, slide it to 'On' or 'Auto'.
    • If in 'Auto' mode, ensure there is sufficient darkness and motion within the sensor's range.
  • Light stays on constantly in 'Auto' mode:
    • Check for continuous motion within the sensor's range.
    • Ensure there is no constant ambient light source tricking the sensor into thinking it's dark.
  • Light is too dim or too bright:
    • Long press the control button to adjust the brightness level.
  • Light color is not desired:
    • Short press the control button to cycle through the available color temperatures.

If you have any persistent problems, please contact the store for assistance. Our customer service will be happy to assist you.

User Tips

  • For optimal motion detection, ensure the sensor is not obstructed by furniture or other objects.
  • Experiment with the three color temperatures (Warm White, Cold White, Mixed Light) to find the perfect ambiance for different rooms or times of day.
  • Utilize the stepless dimming feature to set the ideal brightness for your needs, whether it's a subtle nightlight or a brighter emergency lamp.
  • The memory function for brightness and color settings means your preferred light will be restored even after being unplugged or power cycled.

Warranty and Support

This product comes with a 1-year warranty from the date of purchase.

For any questions, concerns, or warranty claims, please contact the store where you purchased the product. Our customer service team is dedicated to providing support and will be happy to assist you.

Please retain your proof of purchase for warranty purposes.

Frequently Asked Questions (FAQ)

Q: What are the highlights of this product?
A: Some of the highlights include cold white and warm white light colors, CE and RoHS certifications, and ABS body material.
Q: What are the benefits of using this night lamp?
A: The benefits include motion power generation, included LED bulbs, and an EU plug design (also available in US plug).
Q: How efficient is it in terms of energy?
A: It has an energy efficiency level of 0-5W, with a typical power consumption of 0.6W.
Q: What's the working voltage for this night lamp?
A: It works with both 110V and 220V voltages, with a nominal voltage range of 85-265V.
Q: What kind of light source does it use?
A: It uses LED bulbs as its light source, which are included and non-replaceable.
Q: In what scenarios can I use this product?
A: You can use it in various indoor scenarios such as rooms, kitchens, WC, hallways, and it is suitable for emergency situations.

Made in China

This device is recyclable. Please dispose of responsibly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.