AKKO 5075B Plus

Contents

Akko 5075B Plus Mechanical Gaming Keyboard User Manual

Model: 5075B Plus

Brand: AKKO

1. Introduction

The Akko 5075B Plus is a versatile 75% mechanical gaming keyboard designed for optimal performance and customization. It features multi-mode connectivity (Bluetooth, 2.4GHz wireless, and USB Type-C wired), hot-swappable switches, and RGB backlighting with extensive customization options. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.

Akko 5075B Plus Series Keyboards
Akko 5075B Plus Series Keyboards: Multi-modes, Hot-swappable, ANSI/ISO Layout.

2. Technical Specifications

FeatureDescription
DimensionsApproximately 335mm * 146mm * 42mm
WeightApproximately 0.88kg
Keycap MaterialPBT plastic (Doubleshot printing)
Connection ModesBluetooth 5.0, 2.4GHz Wireless, USB Type-C Wired
Interface TypeUSB Type-C
Battery Capacity3000mAh
Switches Hot SwapYes (3-Pin / 5-Pin Support)
Backlight TypeMULTICOLOR (South-facing RGB, except 5075B Plus Shine-Through)
N-Key RolloverSupported
Operating SystemsWindows / macOS / iOS / Android
Polling Rate1000Hz (wired and 2.4G mode), 125Hz (Bluetooth mode)
StructureGasket Mount
LayoutsANSI/ISO-DE/ISO-FR
Keyboard dimensions diagram
Keyboard dimensions: 335mm length, 146mm width, 30mm height.
Gasket Mount Design diagram
Gasket Mount Design with Multi-Layer Noise Reduction Kit, showing components like Keycaps, Switches, Top Case, PC Plate (Silicone Gaskets), Silicone Plate Foam, IXPE Switch Pad, PCB, Silicone, and Bottom Case.

3. Setup Instructions

3.1. Connectivity Overview

The Akko 5075B Plus keyboard supports three connection modes: Bluetooth, 2.4GHz wireless, and USB Type-C wired. The back of the keyboard features a toggle switch to select between Windows and Mac modes, and a slot for the 2.4GHz USB receiver.

Back of keyboard showing USB receiver slot
The back of the keyboard features a storage slot for the 2.4GHz USB receiver.

3.2. Switching to Bluetooth Mode

  1. Unplugged Keyboard: If the keyboard is not connected via USB, push the switch on the back to the left (Windows) or right (Mac) to enter the desired operating system mode. Then, long press Fn + E / R / T to initiate Bluetooth pairing. The blue LEDs under the E / R / T keys will flash quickly, indicating pairing mode.
  2. USB-Connected Keyboard: If the keyboard is plugged into the computer via USB, it will automatically enter Bluetooth mode without needing to use the back switch. Simply long press Fn + E / R / T to enable Bluetooth pairing. The blue LEDs under the E / R / T keys will flash quickly.

3.3. Setting the Bluetooth Profile

The keyboard is equipped with both Bluetooth 5.0 and 3.0 frameworks. The device names are: 5075BP-1 / 5075BP-2 / 5075BP-3 (Bluetooth 5.0) and Akko 5075BP BT3.0 (Bluetooth 3.0). After pairing via Fn + E / R / T, the system will remember the last connected device before Bluetooth mode is turned off.

3.4. Bluetooth Pairing

With Bluetooth enabled on your PC, tablet, or smartphone, search for Bluetooth devices. You will see two device names: Akko 5075BP BT3.0 (Bluetooth 3.0) and 5075BP-1 (Bluetooth 5.0). Select the Bluetooth group based on your device's compatibility and preference. (Note: Some devices may only detect the Bluetooth 5.0 group).

3.5. Hot-Swappable Switches

The Akko 5075B Plus supports hot-swappable switches, allowing you to easily change switches without soldering. This feature supports both 3-pin and 5-pin switches.

Hot-swappable switches being removed from keyboard
Demonstration of removing hot-swappable switches from the keyboard.

4. Operating Instructions

4.1. Hotkeys

Hotkey CombinationFunction
Fn + F1File Explorer
Fn + F2E-mail
Fn + F3Windows Search
Fn + F4Browser Homepage
Fn + F5Media
Fn + F6Pause / Playback
Fn + F7Previous Song
Fn + F8Next Song
Fn + IInsert
Fn + CCalculator
Fn + MMute
Fn + <Decrease Volume
Fn + >Increase Volume
Fn + WSwap W A S D with ↑ ↓ ← →

4.2. System Commands (Windows)

CommandAction
Fn + Left WinLock Windows Key
Hold Fn + ~ (for 5s)Restore Factory Settings
Hold Fn + Right Ctrl (for 3s)Revert Ctrl into Menu (APP) key

4.3. System Commands (Mac)

Users can switch to Mac mode by pushing the toggle switch on the back of the keyboard to the right.

CommandFunction
F1Decrease display brightness
F2Increase display brightness
F3Open mission control
F4Activate Siri
F7Skip back (Audio)
F8Pause/Play (Audio)
F9Skip forward (Audio)
F10Mute
F11Volume down
F12Volume up
Left WinOption
Left AltCommand
Right AltCommand
Fn + (F1 ~ F12)F1 ~ F12

4.4. Backlight Settings

The keyboard features RGB backlighting and side lights with various custom lighting modes.

RGB Backlit & Side Lights diagram
RGB Backlit & Side Lights provide rich custom lighting modes. 20 Backlit Modes: FN + Home / PgUP / PgDn / End.
Hotkey CombinationFunction
Fn + HomeEffect 1-5 (Constant, Ripple, Reactive, Stream, Meteor)
Fn + PgUpEffect 6-10 (Starlight, Neon, Wave, Flow, Rainbow)
Fn + PgDnEffect 11-15 (Raindrop, Snowflake, Gather, One-Two, Blossom)
Fn + EndEffect 16-20 (Breathing, Aurora, Sine Wave, Rain, Peak)
Fn + LLight On / Off
Fn + \In RGB color modes, cycles through 7 single colors + RGB loop effect.
Fn + ↑Increase Backlight Brightness
Fn + ↓Decrease Backlight Brightness
Fn + ←Set animation direction to left
Fn + →Set animation direction to right
Fn + -Slower Animation Speed
Fn + =Faster Animation Speed
Fn + ZCase Light Brightness Change
Fn + XCase Light Animation Speed Change
Fn + Left CtrlCase Light Effect Change

4.5. Multifunction Knob

The knob on the keyboard can be pressed to switch modes and rotated to adjust settings.

Multifunction Knob diagram
The multifunction knob can be pressed to switch modes, and rotated to adjust light brightness or volume.

4.6. Switching Bluetooth Devices

After pairing up to 3 Bluetooth devices, you can quickly switch between them by short pressing Fn + E / Fn + R / Fn + T. For 2.4G wireless, short press Fn + Y. For wired mode, short press Fn + U.

Video demonstrating the RGB lighting effects and multi-mode functionality of the Akko 5075B Plus keyboard.

4.7. Key/Lighting Effects Customization

The keyboard supports key/RGB backlit mapping and audio visualizer in either 2.4GHz or wired mode. For advanced customization, please download the Akko Cloud Driver from the official website: en.akkogear.com.

5. Maintenance

5.1. Shutting Off the Keyboard

When not in use, turn off the power switch on the keyboard's back panel to conserve battery. The keyboard will enter sleep mode after 15 minutes of inactivity and can be woken up by pressing any key. Note: Battery saver mode in Windows may affect or delay the sleep activation time.

5.2. Resetting the Keyboard

If you forget a paired device or experience Bluetooth connection issues, you may need to clear the computer's Bluetooth cache by removing the 5075 keyboard from the list of connected devices and re-pairing.

5.3. Cleaning

Regularly clean your keyboard with a soft, dry cloth. For deeper cleaning, you may use a can of compressed air to remove dust and debris from between the keycaps. Avoid using harsh chemicals or abrasive materials.

6. Troubleshooting

  • Connectivity Issues: If the keyboard is not connecting, ensure it is fully charged. Try re-pairing the Bluetooth device or reconnecting the 2.4GHz dongle. For wired mode, ensure the USB-C cable is securely connected.
  • Keys Not Responding: Perform a factory reset (Hold Fn + ~ for 5s). If individual keys are not working, check if the hot-swappable switch is properly seated or try replacing it.
  • RGB Lighting Problems: Ensure the backlight is turned on (Fn + L). Cycle through backlight modes and brightness settings using the hotkeys described in section 4.4. If issues persist, use the Akko Cloud Driver for diagnosis.
  • Charging Issues: If the keyboard is not charging, try a different USB-C cable and port. Ensure the keyboard is not in a mode that prevents charging (e.g., some sleep modes).
  • Bluetooth Disruption: If Bluetooth connection is unstable, try resetting the keyboard as described in section 5.2 and re-pairing. Ensure no other devices are causing interference.

7. User Tips

  • Maximize Battery Life: Always turn off the keyboard using the physical switch on the back when not in use for extended periods.
  • Customization: Download the Akko Cloud Driver from en.akkogear.com to unlock full customization for key remapping, macro creation, and advanced RGB lighting effects.
  • Switch Experimentation: Take advantage of the hot-swappable design to try different mechanical switches that suit your typing or gaming preferences.
  • Layout Awareness: Be mindful of the selected layout (ANSI/ISO-DE/ISO-FR) and operating system mode (Windows/Mac) to ensure correct key functions.

8. Warranty & Support

Akko provides a 1-year warranty for non-human damage from the date of purchase. If the warranty period expires, repair services will be charged at a reasonable market price. Users who disassemble the keyboard without manufacturer/seller instruction will immediately void the warranty. The return and warranty policy may vary by distributor and platform.

Precautions:

Man-made damage includes, but is not limited to, immersion in liquid, falling, or excessive force applied to cables/wires. Please handle the electronic product with care.

For support, please contact Akko customer service:

  • Phone: 0755-27728007
  • QQ: 981572876

Official after-sales service hours are Monday to Friday, 10:00 AM to 6:00 PM (GMT+8), excluding national holidays. Please note that repair and logistics times may vary due to uncontrollable factors such as parts procurement. Your patience is appreciated.

9. FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Warning Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.