HOMEFISH P10

Contents

HOMEFISH P10 Smart Automatic Soap Dispenser

User Manual

Model: P10

1. Introduction

Thank you for purchasing the HOMEFISH P10 Smart Automatic Soap Dispenser. This device provides a hygienic and convenient way to dispense soap with its touchless motion sensor technology. Please read this manual carefully before use to ensure proper operation and maintenance.

HOMEFISH P10 Smart Automatic Soap Dispenser dispensing foam into a hand.
The HOMEFISH P10 Smart Automatic Soap Dispenser in use, providing foam soap.

2. Product Specifications

General Specifications

  • Model Number: P10
  • Rated Power: 1.5W
  • Power Supply: Lithium Battery
  • Input Voltage: DC-5V (Type C USB)
  • Sensing Speed: 0.25s
  • Sensing Distance: 0-70mm
  • Bottle Capacity: 420ML
  • Net Weight: 261g (not including soap)
  • Gross Weight: 377g (not including soap)
  • Working Temperature: 5°C~35°C
  • Waterproof Grade: IPX5
  • Working Humidity: 0%~85%
  • Material: Plastic
  • Origin: CN
  • Smart Device: Yes
  • Chemical Substances: None related to Hign

Dimensions

  • Product Size: 126 x 92 x 173mm
  • Packing Size: 132 x 98 x 180mm
Diagram showing the dimensions of the HOMEFISH P10 soap dispenser.
Product dimensions: 173mm height, 126mm width, 61mm depth (top), 92.69mm depth (side).
Detailed specifications and features of the P10 soap dispenser, including battery type, rated power, charging parameters, usage times, working mode, water bottle capacity, induction distance, and waterproof grade.
Detailed product parameters and features.

3. Package Contents

Please check the box for the following items:

  • HOMEFISH P10 Automatic Soap Dispenser (Main Unit)
  • USB Type-C Charging Cable
  • Wall Mount Hook
  • User Manual
Contents of the HOMEFISH P10 package: soap dispenser, user manual, USB-C cable, and wall mount adhesive hook.
Unboxing the HOMEFISH P10, showing all included accessories.

4. Setup

  1. Charge the Device: Before first use, fully charge the dispenser using the provided USB Type-C cable. The indicator lights will flash during charging and remain solid when fully charged. Ensure the charging port's rubber plug is securely closed after charging to prevent water ingress.
  2. Prepare the Soap Container: Turn the bottle 90 degrees counter-clockwise to unscrew it from the main unit.
  3. Fill with Soap: Fill the bottle with suitable liquid soap. For foam soap, it is recommended to dilute liquid soap with water at a 1:4 ratio (1 part soap to 4 parts water) for optimal foaming.
  4. Attach the Soap Container: Align the bottle mouth with the card position on the main body, then rotate the bottle 90 degrees clockwise to secure it.
  5. Wall Mounting (Optional): If you wish to wall-mount the dispenser, attach the provided adhesive hook to a clean, dry, and smooth surface. Ensure the hook is firmly pressed for good adhesion. Then, hang the dispenser onto the hook.
Close-up of the wall mount adhesive hook attached to the back of the soap dispenser's base.
The wall mount hook attached to the dispenser base.
HOMEFISH P10 soap dispenser mounted on a bathroom wall above a sink.
The dispenser mounted on a wall.
HOMEFISH P10 soap dispenser dispensing liquid soap into a hand.
The dispenser dispensing liquid soap.

5. Operating Instructions

  1. Power On/Off:
    • To Turn On: Short press the touch area (power button). LED1 will light up for 2 seconds.
    • To Turn Off: Long press the touch area for 2 seconds. LED1-LED4 will flash for 3 seconds simultaneously.
  2. Gear Switching (Dispensing Volume):
    • While the device is on, short press the power button to cycle through the dispensing gears.
    • Gear 1: LED1 lights up (dispenses 0.3s)
    • Gear 2: LED1 and LED2 light up (dispenses 0.8s)
    • Gear 3: LED1, LED2, and LED3 light up (dispenses 1.5s)
    • Gear 4: LED1, LED2, LED3, and LED4 light up (dispenses 2.0s)
  3. Dispensing Soap: Place your hand 0-7cm below the sensor area. The dispenser will automatically dispense soap. Soap will be dispensed each time your hand is detected.
  4. Low Battery Indication: The indicator lamp will flash for 5 seconds, then the device will automatically shut down.
Close-up of the sensor and nozzle area of the HOMEFISH P10 soap dispenser.
Close-up of the sensor and nozzle.
The top of the soap dispenser showing the power button and four indicator lights, with three lights illuminated.
Indicator lights showing current gear or battery status.

Video demonstrating the unboxing, setup, and operation of the HOMEFISH P10 soap dispenser, including filling with soap and dispensing foam.

6. Maintenance

  1. Cleaning Mode: While the device is on, short press the power button three times. The dispenser will automatically spray for 10 seconds. This mode helps clean the internal hose. You can also short press the power button again to turn it off.
  2. Regular Cleaning: To prevent nozzle clogging, clean the internal hose with clean water using the cleaning mode about once a month. Afterward, wipe the tank and the surface of the main unit thoroughly with a soft, clean cloth.
  3. Long-Term Storage: If the product will not be used for a long time, remove the liquid soap and clean the internal piping with clean water.
  4. Surface Cleaning: If cleaning is needed, it is recommended to use a wet towel to gently wipe the surface of the device when it is turned off.
  5. Charging Port: After charging, ensure the rubber plug of the charging port is securely closed to prevent water from entering.

Important Notes:

  • Do not immerse the product in water or rinse directly with water to avoid short circuits.
  • When installing or replacing the hand sanitizer, do not tilt the bottle body. A small amount of liquid leakage is normal and can be used normally after wiping it off.
  • Do not use non-dedicated hand sanitizer for replacement, as this may cause machine failure.
  • Store this product in a cool place, away from direct sunlight or close to heat sources.
  • If the product is wet, inverted, or tilted, immediately check if water has entered the machine. If necessary, wipe and dry it before continuing to use.

7. Troubleshooting Table

If you encounter any issues with your HOMEFISH P10, please refer to the table below for common problems and solutions:

Phenomenon Cause of Issue Solution
Cannot switch machine on Battery is exhausted Charge the device via power supply
Indicator LED does not shine Product is not turned on Boot the device properly
Does not dispense soap Liquid soap is finished Change/refill liquid soap
Indicator flashes quickly Sensor is covered by soap Shut down, wipe the sensing area, and restart

8. User Tips

  • For optimal foam, dilute liquid soap with water. A common recommendation is a 1:3 or 1:4 ratio (1 part soap to 3 or 4 parts water).
  • Regularly use the cleaning mode with clean water to prevent the internal hose and nozzle from clogging, especially if using thicker soaps.
  • Experiment with different soap-to-water ratios to find the perfect foam consistency for your preferred soap type.

9. Warranty and Support

This product is designed for durability and performance. For any issues not covered in the troubleshooting section, please contact customer support for assistance. Do not attempt to disassemble or repair the device yourself, as this may void the warranty.

Special Note: The internal program of this product is set not to operate during charging. Therefore, using this product while charging is prohibited.

© 2023 HOMEFISH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.