1. Introduction
Thank you for choosing the HOMEFISH Smart Soap Dispenser P10. This touchless motion sensor device is designed for hygienic and convenient hand washing, offering both liquid and foam dispensing options. Please read this manual carefully before use to ensure proper operation and maintenance.
Machine Structure Overview
- Indicator Light: Shows power status and gear setting.
- Touch Area: For power on/off and mode selection.
- Sensor Area: Detects hand for touchless dispensing.
- Dispenser Mouth: Where soap is dispensed.
- Bottle: Reservoir for liquid soap.
- Charging Port: USB Type-C for recharging.
- Wall Mounted Panel: Optional accessory for wall installation.
2. Specifications
| Feature | Specification |
|---|---|
| Model Number | P10 |
| Rated Power | 1.5W |
| Power Supply | Lithium Battery |
| Activation Method | Touch + Sensor |
| Sensing Speed | 0.25s |
| Sensing Distance | 0-70mm |
| Dispensing Time (4 gears) | 0.3s / 0.8s / 1.5s / 2.0s |
| Bottle Capacity | 420ML |
| Net Weight (without soap) | 261g |
| Gross Weight (without soap) | 377g |
| Working Temperature | 5°C ~ 35°C |
| Waterproof Grade | IPX5 |
| Working Humidity | 0% ~ 85% |
| Material | Plastic |
| Smart Device | Yes |
| Origin | Mainland China |
Dimensions
3. Functions
- Power On/Off: Press the touch area. LED1 will light for 2 seconds when turning on. To turn off, long press the touch area for 2 seconds; LED1 and LED4 will flash for 3 seconds.
- Gear Switch: Press the power button to cycle through 4 dispensing volume gears:
- Gear 1: LED1 lit (0.3s dispensing)
- Gear 2: LED1, LED2 lit (0.8s dispensing)
- Gear 3: LED1, LED2, LED3 lit (1.5s dispensing)
- Gear 4: LED1, LED2, LED3, LED4 lit (2.0s dispensing)
- Low Battery Indicator: The LED light will flash for 5 seconds, then turn off automatically.
- Sensing: Place your hand within 0-70mm of the dispenser mouth for automatic soap dispensing.
- Cleaning Mode: Triple-click the power button to activate. The machine will automatically turn off after 10 seconds, or you can press the power button again to stop it.
Note: The soap dispenser will enter standby mode if not used for a long time; there is no need to manually turn it off.
4. Setup
- Separate the Bottle: Turn the bottle 90 degrees counterclockwise to detach it from the main unit.
- Fill with Liquid Soap: Carefully pour your preferred liquid soap into the bottle.
- Reattach the Bottle: Align the bottle mouth with the body's card position, then rotate the bottle 90 degrees clockwise until securely attached.
- Optional Wall Mounting: Use the provided Wall Mounted Panel accessory to install the dispenser on a wall. Ensure the surface is clean and dry before applying the adhesive panel.
- Priming/Cleaning the Pump (if needed):
- Cut a small part from the dredge bottle mouth (if using the provided dredge bottle).
- Fill the dredge bottle with clean water.
- Unscrew the soap dispenser head and pull off the filter head and the end of the hose.
- Insert the dredge bottle into the hose and fill the hose with water until it comes out from the nozzle. This process helps to prime the pump or clean internal residue.
Video: Unboxing, assembly, and demonstration of the soap dispenser.
5. Operation
- Power On: Press the touch area once. The indicator light (LED1) will illuminate for 2 seconds, indicating the dispenser is on.
- Select Dispensing Volume: Press the power button (located on the touch area) to cycle through the 4 available dispensing volume gears. The number of lit LEDs corresponds to the selected gear (1-4).
- Dispense Soap: Place your hand flat under the dispenser mouth within the 0-70mm sensing range. The sensor will detect your hand and dispense the selected amount of soap.
- Power Off: Long press the touch area for 2 seconds. LED1 and LED4 will flash for 3 seconds, then the dispenser will turn off.
6. Maintenance and Safety Notes
Cleaning
- To clean the exterior, gently wipe the surface of the dispenser with a wet towel when the device is turned off.
- After charging, ensure the soft rubber plug of the charging port is securely in place to prevent water from entering.
- If the product is unused for an extended period, remove the hand sanitizer from the bottle to prevent deterioration.
- To activate the internal cleaning mode, triple-click the power button. The machine will run for 10 seconds and then automatically turn off. You can also press the power button again to stop it manually.
Safety Notes
- This unit and its accessories are not toys; keep out of reach of children.
- Do not pull the power cord with wet hands.
- Ensure the adapter and power cord are dry before use.
- The product contains a built-in rechargeable battery. Do not dispose of it in fire, or charge/use/store in high-temperature environments.
- Do not use if the power cord or adapter is damaged, or if the power cord socket is loose.
- Do not immerse the product in water or any other liquid.
- Do not disassemble the body to replace the battery.
- Avoid knocking or dropping the product. If damaged due to impact, discontinue use immediately.
- Persons (including children) who are physically unsound, mentally impaired, or lack relevant experience should use the product under supervision.
- When installing or replacing hand sanitizer, do not tilt the bottle body excessively. A small amount of liquid flow is normal and can be wiped off.
- Use only dedicated hand sanitizer. Non-dedicated hand sanitizer may cause machine failure.
- Store this product in a cool place, away from direct sunlight or heat sources.
- If water sprays, the unit is upside down, or tilted, confirm if liquid has entered the machine. If so, wipe it dry before continuing use.
7. Troubleshooting Guide
| Failure Phenomenon | Cause of Issue | Solution |
|---|---|---|
| Can't switch machine | The battery is exhausted | Charge by power supply |
| Indicator LED does not shine | Product is not turned on | Boot properly |
| Do not dispense | Liquid soap is finished | Change liquid soap |
| The indicator flashes quickly | The sensor is covered by soap | Shut down, wipe the sensing area and restart |
8. User Tips
- Soap Type: This dispenser is designed for liquid and foam soaps. It is not suitable for shampoo or other thick liquids, which may cause clogging or damage to the pump mechanism.
- Dilution: For foam dispensing, you may need to dilute your liquid soap with water (typically a 1:3 or 1:4 ratio of soap to water) to achieve optimal foam consistency.
- Placement: Consider both countertop and wall-mounted options for optimal space-saving and convenience in your bathroom or kitchen.
9. Warranty and Support
For detailed warranty information and further support, please refer to the official product documentation. A digital version of the user manual is available in PDF format:
If you encounter any issues not covered in this manual, please contact the seller or manufacturer's customer support for assistance.