1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your GIGABYTE B550M AORUS ELITE Micro-ATX motherboard. This motherboard is designed to support AMD Ryzen 3000, 4000, and 5000 Series CPUs, featuring Dual Channel DDR4 memory, SATA3, and M.2 storage interfaces.
GIGABYTE is committed to reducing paper use and promoting environmental responsibility. For more product details and the latest information, please visit the official GIGABYTE website.
1.1. Identifying Your Motherboard Revision
The revision number on your motherboard helps identify its specific version. For example, "REV: 1.0" indicates revision 1.0. This information is crucial when updating motherboard BIOS, drivers, or seeking technical support.
2. Setup
2.1. Installation Precautions
WARNING: Motherboards contain delicate electronic circuits. Always handle with care to prevent damage from electrostatic discharge (ESD).
- Ensure the chassis is suitable for the motherboard.
- Do not remove or break the motherboard S/N (Serial Number) sticker or warranty sticker; these are required for warranty validation.
- Always remove AC power by unplugging the power cord from the power outlet before installing or removing components.
- Connect hardware components tightly and securely to internal connectors.
- Avoid touching metal leads or connectors on the motherboard.
- Wear an electrostatic discharge (ESD) wrist strap when handling electronic components. If not available, touch a metal object first to discharge static electricity.
- Place the motherboard on an antistatic pad or within an electrostatic shielding container prior to installation.
- Ensure the power supply is turned off before connecting or unplugging its cable from the motherboard.
- Verify the power supply voltage is set according to local standards before turning on.
- Confirm all cables and power connectors are properly connected before using the product.
- To prevent damage, do not allow screws to contact motherboard circuits or components.
- Ensure no leftover screws or metal components are on the motherboard or within the computer casing.
- Do not place the computer system on an uneven surface or in a high-temperature/wet environment.
- Turning on power during installation can damage components and cause physical harm.
- Consult a certified computer technician if uncertain about installation steps or product usage.
- If using an adapter, extension power cable, or power strip, follow its installation and grounding instructions.
2.2. Motherboard Layout
Familiarize yourself with the layout of the motherboard to locate key components and connectors during installation.
2.3. Installing the CPU
Follow these steps carefully to install your AMD AM4 CPU onto the motherboard.
- Completely lift up the CPU socket locking lever.
- Locate pin one (denoted by a small triangle) on both the CPU and the CPU socket.
- Carefully place the CPU into its socket, ensuring correct orientation. Do not force the CPU.
- Once the CPU is positioned, gently lower the locking lever and latch it into the fully locked position.
- Apply an even, thin layer of thermal grease to the CPU surface.
- Install the CPU cooler. Do not power on the computer without a CPU cooler installed to prevent overheating and damage.
2.4. Installing the Memory
This motherboard supports Dual Channel DDR4 memory. For optimal performance, use memory modules of the same capacity, brand, speed, and chips.
- Ensure the motherboard supports the memory modules. Refer to GIGABYTE's website for the latest Memory Support List.
- Always turn off the computer and unplug the power cord before installing memory.
- Memory modules have a foolproof design; they can only be installed in one direction. If a module does not fit, try reversing its orientation.
Dual Channel Memory Configuration
The motherboard has four memory sockets, divided into two channels:
- Channel A: DDR4_A1, DDR4_A2
- Channel B: DDR4_B1, DDR4_B2
For Dual Channel mode:
- Dual Channel mode cannot be enabled with only one memory module.
- For two or four memory modules, use modules of the same capacity, brand, speed, and chips.
| DDR4_A1 | DDR4_A2 | DDR4_B1 | DDR4_B2 | |
|---|---|---|---|---|
| 2 Modules | -- | DS/SS | -- | DS/SS |
| 4 Modules | DS/SS | DS/SS | DS/SS | DS/SS |
(SS=Single-Sided, DS=Double-Sided, "--"=No Memory)
When installing a single memory module, we recommend installing it in the DDR4_A2 or DDR4_B2 socket.
2.5. Installing an Expansion Card
To install a PCI Express expansion card (e.g., graphics card), follow these steps:
- Ensure the motherboard supports the expansion card. Refer to the card's manual.
- Always turn off the computer and unplug the power cord before installation.
- Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
- Align the card with the slot and press down until it is fully seated.
- Secure the card's metal bracket to the chassis back panel with a screw.
- After installing all expansion cards, replace the chassis cover(s).
- Turn on your computer. If necessary, adjust BIOS settings for the expansion card.
- Install the driver provided with the expansion card in your operating system.
2.6. Internal Connectors
Connect internal devices and peripherals to the appropriate headers on the motherboard. Always ensure correct orientation and secure connections.
- ATX_12V/ATX (2x4 12V Power Connector and 2x12 Main Power Connector): These connectors supply power to the motherboard. Ensure the power supply is off before connecting.
- CPU_FAN/SYS_FAN1/SYS_FAN2 (Fan Headers): All fan headers are 4-pin. Connect fan cables with correct orientation (black wire is ground). Motherboard supports CPU fan speed control.
- D_LED1/D_LED2 (Addressable LED Strip Headers): Connect standard 5050 addressable LED strips (5V, max 5A, 1000 LEDs). Ensure power pin (triangle on plug) connects to Pin 1.
- LED_CPU (CPU Cooler LED Strip/RGB LED Strip Header): Connect CPU cooler LED strips or standard 5050 RGB LED strips (12V, max 2A, 2m). Ensure power pin (triangle on plug) connects to Pin 1.
- LED_C1/LED_C2 (RGB LED Strip Headers): Connect standard 5050 RGB LED strips (12V, max 2A, 2m). Ensure power pin (triangle on plug) connects to Pin 1.
- SATA3 0/1/2/3 (SATA 6Gb/s Connectors): Supports SATA 6Gb/s, 3Gb/s, and 1.5Gb/s devices. Supports RAID 0, RAID 1, and RAID 10.
- M2A_CPU/M2B_SB (M.2 Socket 3 Connectors): Supports M.2 SATA SSDs or M.2 PCIe SSDs. M.2 PCIe SSDs cannot be used for RAID with M.2 SATA SSDs or SATA HDDs.
- F_AUDIO (Front Panel Audio Header): Connects to your chassis front panel audio module. Match wire assignments to pin assignments.
- F_USB1 (USB 2.0/1.1 Header): Provides two USB 2.0/1.1 ports via an optional USB bracket.
- COM (Serial Port Header): Provides one serial port via an optional COM port cable.
- TPM (Trusted Platform Module Header): Connects to a TPM module (2x6 pin, for GC-TPM2.0_S module only).
2.7. Back Panel Connectors
The back panel provides various ports for connecting external peripherals.
- PS/2 Keyboard/Mouse Port: For connecting a PS/2 keyboard or mouse.
- DVI-D Port: Supports up to 1920x1200@60 Hz. Does not support D-Sub connection via adapter.
- HDMI Port: HDCP 2.3 compliant, supports Dolby TrueHD and DTS HD Master Audio, up to 4096x2160@60 Hz.
- USB 3.2 Gen 1 Ports: For USB 3.2 Gen 1 devices, compatible with USB 2.0. One port functions as a Q-Flash Plus port.
- USB 2.0/1.1 Ports: For USB 2.0/1.1 devices.
- RJ-45 LAN Port: Gigabit Ethernet LAN for Internet connection (1 Gbps/100 Mbps/10 Mbps).
- Audio Jacks: 3 audio jacks for 2/4/5.1/7.1-channel audio. Functionality can be changed via audio software.
- SMA Antenna Connectors (2T2R): For connecting Wi-Fi antennas (Only for B550M AORUS ELITE AX).
3. Operating
3.1. BIOS Setup
The BIOS (Basic Input and Output System) manages hardware parameters and system configuration. To access the BIOS Setup program, press the <Delete> key during POST (Power-On Self-Test) when the computer boots.
Function Keys:
- <DEL>: BIOS SETUP/Q-FLASH - Enters BIOS Setup or Q-Flash utility.
- <F12>: BOOT MENU - Allows setting the first boot device for a single boot session without entering BIOS Setup.
- <END>: Q-FLASH - Accesses the Q-Flash utility directly.
WARNING: BIOS flashing is potentially risky. Only flash the BIOS if necessary and with caution. Inadequate flashing may result in system malfunction. It is recommended not to alter default settings unless required, as it can lead to system instability.
For details on configuring BIOS Setup, visit GIGABYTE's website: https://www.gigabyte.com/WebPage/954/amd500-bios.html
3.2. Operating System and Driver Installation
After correct BIOS settings, you can install your operating system. Some OS versions include RAID drivers, eliminating the need for separate installation. After OS installation, install all required drivers from the GIGABYTE APP Center for optimal performance.
RAID Driver Installation (if required by OS)
- Download the AMD RAID Preinstall Driver file from GIGABYTE's website (Support\Download\SATA RAID/AHCI page), unzip, and copy to a USB thumb drive.
- Boot from the Windows setup disc. When prompted to load the driver, select "Browse."
- Insert the USB thumb drive, browse to the driver location, select "AMD-RAID Bottom Device," click "Next." Then select "AMD-RAID Controller" and click "Next" to load. Continue OS installation.
Driver Installation via APP Center
After OS installation, a dialog box will appear on the desktop asking to download and install drivers and GIGABYTE applications via APP Center. Click "Install" to proceed. Ensure "APP Center Download & Install" is enabled in BIOS Setup (Settings\IO Ports\APP Center Download & Install Configuration).
When the End User License Agreement appears, press <Accept> to install APP Center. Select desired drivers and applications within APP Center and click "Install."
For more software information, visit: https://www.gigabyte.com/WebPage/320/am4-app-center.html?m=sw
4. Maintenance
4.1. BAT (Battery) Replacement
The CMOS battery powers the BIOS settings (date, time) when the computer is off. Replace it if settings are lost or inaccurate.
WARNING: Always turn off the computer and unplug the power cord before replacing the battery. Replace with an equivalent model. Incorrect replacement can damage devices.
- Turn off your computer and unplug the power cord.
- Gently remove the old battery from its holder.
- Insert the new battery, ensuring correct positive (+) and negative (-) orientation.
- Plug in the power cord and restart your computer.
4.2. CLR_CMOS (Clear CMOS Jumper)
Use the CLR_CMOS jumper to reset BIOS configurations to factory defaults. This can resolve issues caused by incorrect BIOS settings.
WARNING: Always turn off the computer before clearing CMOS values.
- Turn off your computer and unplug the power cord.
- Locate the CLR_CMOS jumper on the motherboard.
- Use a metal object (like a screwdriver) to momentarily short the two pins for a few seconds.
- Plug in the power cord and restart. After restarting, enter BIOS Setup to load optimized defaults or manually configure settings.
5. Troubleshooting
- System Instability/Failure to Boot: Incorrect BIOS settings can cause instability. Try clearing CMOS values (see section 4.2) and loading optimized defaults in BIOS.
- Component Not Recognized (e.g., Graphics Card): Ensure the component is fully seated in its slot and secured. Verify all necessary power cables are connected. Install the latest drivers for the component.
- Overheating: Ensure all fan cables are correctly connected to the fan headers. Verify CPU cooler installation and thermal paste application. Ensure adequate airflow within the chassis.
- No Display Output: Check monitor connections to the correct display output on the motherboard or graphics card. Ensure the graphics card is properly installed and powered.
- BIOS Update Issues: If you encounter problems after a BIOS update, try clearing the CMOS. If the issue persists, refer to the GIGABYTE website for specific Q-Flash Plus instructions or contact support.
6. Specifications
| Feature | Specification |
|---|---|
| CPU | AMD Socket AM4, supports AMD Ryzen™ 5000, 5000 G-Series, 4000 G-Series, 3000, and 3000 G-Series Processors. |
| Chipset | AMD B550 |
| Memory | 4 x DDR4 DIMM sockets, up to 128 GB (32 GB single DIMM capacity). Supports DDR4 3200/2933/2667/2400/2133 MT/s. Dual channel architecture. Supports ECC Un-buffered DIMM 1Rx8/2Rx8 and non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16. Supports Extreme Memory Profile (XMP). |
| Onboard Graphics | Integrated Graphics Processor with AMD Radeon™ Graphics support. 1 x DVI-D port (max 1920x1200@60 Hz), 1 x HDMI port (max 4096x2160@60 Hz, HDMI 2.1, HDCP 2.3, HDR). Max shared memory 16 GB. |
| Audio | Realtek® Audio CODEC, High Definition Audio, 2/4/5.1/7.1-channel. |
| LAN | Realtek® GbE LAN chip (1 Gbps/100 Mbps/10 Mbps). |
| Wireless Communication Module | Realtek® Wi-Fi 6E RTL8852CE (Wi-Fi a, b, g, n, ac, ax, 2.4/5/6 GHz bands), BLUETOOTH 5.3. Supports 11ax 160MHz wireless standard. (Only for B550M AORUS ELITE AX). |
| Expansion Slots | 1 x PCI Express x16 slot (PCIEX16) (CPU integrated: PCIe 4.0/3.0 x16 mode). 1 x PCI Express x16 slot (PCIEX4) (Chipset integrated: PCIe 3.0 x4 mode). 1 x PCI Express x1 slot (PCIEX1) (Chipset integrated: PCIe 3.0 x1 mode). |
| Storage Interface | 1 x M.2 connector (M2A_CPU) (CPU integrated: Socket 3, M key, type 2242/2260/2280/22110 SSDs; supports SATA and PCIe 4.0/3.0 x4/x2 SSDs). 1 x M.2 connector (M2B_SB) (Chipset integrated: Socket 3, M key, type 2242/2260/2280 SSDs; supports SATA and PCIe 3.0 x2 SSDs). 4 x SATA 6Gb/s connectors (Chipset integrated; supports RAID 0, RAID 1, and RAID 10). |
| USB | CPU: 4 x USB 3.2 Gen 1 ports on the back panel. Chipset: 2 x USB 3.2 Gen 1 ports via internal header, 6 x USB 2.0/1.1 ports (4 on back panel, 2 via internal header). |
| Internal Connectors | 1 x 24-pin ATX main power, 1 x 8-pin ATX 12V power, 1 x CPU fan, 2 x system fan, 2 x addressable LED strip, 2 x RGB LED strip, 1 x CPU cooler LED strip/RGB LED strip, 2 x M.2 Socket 3, 4 x SATA 6Gb/s, 1 x front panel, 1 x front panel audio, 1 x USB 3.2 Gen 1, 1 x USB 2.0/1.1, 1 x TPM, 1 x serial port, 1 x Clear CMOS jumper, 1 x Q-Flash Plus button. |
| Back Panel Connectors | 1 x PS/2 keyboard/mouse, 1 x DVI-D, 1 x HDMI, 2 x SMA antenna (2T2R), 4 x USB 3.2 Gen 1, 4 x USB 2.0/1.1, 1 x RJ-45, 3 x audio jacks. |
| Form Factor | Micro ATX; 24.4cm x 24.4cm. |
GIGABYTE reserves the right to make any changes to product specifications without prior notice.
7. User Tips
- CPU Compatibility: This motherboard is compatible with AMD Ryzen 5 5600 and Ryzen 5500 processors. For Ryzen 5000 series CPUs, it is recommended to check the GIGABYTE website for the latest CPU support list and ensure your BIOS is updated to the necessary version.
- Wi-Fi/Bluetooth: For the B550M AORUS ELITE AX model, consider installing an additional Wi-Fi/Bluetooth card to achieve maximum wireless potential if the integrated module does not meet specific needs.
- PCIe Device Recognition: If an expansion card (e.g., graphics card) is not recognized, ensure it is fully seated in the PCIe slot and that all necessary power connectors are attached. Verify that the correct drivers are installed in your operating system.
- BIOS Updates: While the board may support newer CPUs out of the box, it's always good practice to check for and apply the latest BIOS updates from the GIGABYTE website for optimal compatibility and performance.
8. Warranty and Support
For detailed product information, technical support, and to download the latest drivers and utilities, please visit the official GIGABYTE website.
GIGABYTE eSupport: To submit technical or non-technical questions, please visit https://esupport.gigabyte.com.
Contact Information:
- Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231
- TEL: +886-2-8912-4000
- FAX: +886-2-8912-4005
- WEB address (English): https://www.gigabyte.com
A PDF version of the user manual is also available for download: GIGABYTE B550M AORUS ELITE User Manual (PDF)