RACBOX 2.5 AE WST

Contents

RACBOX 2.5 inch Bi-xenon Projector Lens with LED Angel Eyes

Instruction Manual

1. Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your RACBOX 2.5 inch Bi-xenon Projector Lenses with LED Angel Eyes. Designed for automotive lighting upgrades, these projector lenses enhance visibility and safety. Please read this manual thoroughly before use.

RACBOX 2.5 inch Bi-xenon Projector Lenses with LED Angel Eyes and H1 LED Bulbs
RACBOX 2.5 inch Bi-xenon Projector Lenses with LED Angel Eyes and H1 LED Bulbs

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

This product is an auxiliary accessory for automotive lighting and is only used for the normal replacement and upgrade of original car lights, not for illegal modification or illegal use. The products meet relevant national automotive lighting industry standards and have undergone strict quality testing.

3. Product Features

  • Lens: High clear convex lens for strong penetrating power and no astigmatism.
  • Shrouds: High temperature resistant plastic, capable of withstanding 300°C.
  • Reflector: High transmittance for optimal light output and long lifespan.
  • Solenoid: Strong magnetic solenoid to control high and low beam light functions.
  • Angel Eyes: Optic fiber angel eyes, 300% brighter than CCFL angel eyes. Features a dimming function where the angel eye brightness reduces to 50% when the headlight is on, extending lifespan.
  • Compatibility: Universal fit for cars, directly fits H4 and H7 headlight housings (with sufficient space).
Diagram showing product features including ABS plastic cover, aluminum reflector cup, HD glass lens, and LED angel eye.
Detailed view of product components and features
White LED Angel Eyes powered by XBD 2525 LED, highlighting brightness and long lifespan.
White LED Angel Eyes illumination

4. Specifications

AttributeValue
Product TypeProjector Lens
Model Name2.5 AE WST
Lens Size2.5 inch
Socket TypeH1
Compatible Bulb TypeH1 LED / H1 Xenon (with top diameter of 9.2mm for LED)
HID Xenon Bulb Power35W
HID Xenon Bulb Lumen Flux3200lm
LED Bulb Lumen Flux10000lm (for H1 LED Bulbs)
Input VoltageDC 9V-16V
Color Temperature6000K White
HID Lifespan3,000 hours
LED Lifespan50,000 hours
Working Temperature-40°C to 105°C
CertificationCE
OriginMainland China
Package Weight0.96 kg
Package Dimensions (L x W x H)10cm x 10cm x 10cm
Product size diagram showing dimensions of the projector lens components.
Product Dimensions
Diagram showing the H1 LED bulb with dimensions and specifications like power, luminous flux, color temperature, and lifespan.
H1 LED Bulb Specifications

5. Installation Instructions

Professional installation is recommended. Ensure the vehicle is turned off and the battery is disconnected before starting installation.

  1. Turn off the engine and disconnect the vehicle battery to prevent short circuit.
  2. Remove the headlight assembly from the vehicle.
  3. Open the headlight housing properly with professional tools.
  4. Remove the original reflector or bulb from the headlight.
  5. Mount the projector lens into the headlight housing and fix it with brackets or screws.
  6. Adjust the lens position to ensure it is centered and stable.
  7. Connect the low beam and high beam wires correctly.
  8. Install the shrouds or lens covers if needed.
  9. Re-seal the headlight housing to ensure waterproof and airtight.
  10. Reinstall the headlight assembly back to the vehicle.
  11. Adjust the light beam pattern and test low beam, high beam functions.
  12. Check all connections and ensure no abnormal shadows or glare.
Three-step diagram illustrating the installation process of the projector lens into a headlight housing.
Product Installation Steps
Diagram showing easy installation with various adapter rings (H4, H7, 9005, 9006) for different headlight types.
Easy Installation with Adapters
Wiring diagram for the LED Angel Eye and High/Low Beam Connector, showing connections to a 12V LED Driver.
Wiring Diagram for LED Angel Eye and High/Low Beam

Watch this video for a visual guide on product installation and features.

6. Operation

The projector lenses provide both low beam and high beam functionality, controlled by a strong magnetic solenoid. The LED Angel Eyes also provide additional illumination.

Beam Patterns

  • Low Beam Pattern: Provides a soft, wide light distribution that illuminates the road without blinding oncoming drivers.
  • High Beam Pattern: Offers a wider range and super light output for maximum visibility.
Image showing the wide and clear low beam pattern projected onto a wall.
Low Beam Pattern: Wide and Clear
Image showing the wide and focused high beam pattern projected onto a wall.
High Beam Pattern: Wide and Focused

Left-Hand Drive (LHD) vs. Right-Hand Drive (RHD)

It is crucial to select the correct beam pattern for your vehicle's driving side to ensure proper illumination and avoid dazzling other drivers.

  • LHD (Left-Hand Drive): The car steering wheel is on your left hand, and you drive on the right side of the road (e.g., USA, Europe).
  • RHD (Right-Hand Drive): The car steering wheel is on the right hand, and you drive on the left side of the road (e.g., UK, Japan, Australia, Thailand).
Comparison of LHD (Left-hand-drive) and RHD (Right-hand-drive) beam patterns, showing the cutoff differences.
LHD vs. RHD Beam Patterns

7. Maintenance

To ensure optimal performance and longevity of your projector lenses, follow these maintenance guidelines:

  • Regularly inspect the headlight assembly for any signs of damage, loose connections, or moisture ingress.
  • Clean the outer lens surface with a soft, damp cloth and mild soap. Avoid abrasive cleaners that could scratch the lens.
  • Ensure the headlight housing remains properly sealed to prevent water and dust from entering.
  • If replacing bulbs, ensure they are H1 xenon or H1 LED bulbs with a top diameter of 9.2mm for LED, as specified.

8. Troubleshooting (FAQ)

Q: Can I install H4/H7 bulbs to this projector lens?
A: No, this projector lens is designed only for H1 xenon/LED bulbs. H4 or H7 bulbs cannot be installed. For H1 LED bulbs, ensure they have a top diameter of 9.2mm.
Q: My headlight uses H4 or H7 bulbs, is this projector lens suitable?
A: Yes, this projector lens can be fitted into H4 and H7 headlight housings, provided there is sufficient space for installation. Adapter rings for H4 and H7 are included.
Q: Can I install halogen bulbs?
A: No, halogen bulbs are generally too large for these lenses. Additionally, halogen bulbs generate high temperatures which can damage the reflector of the projector lens.

9. User Tips

  • The RACBOX 2.5 AE WST model is known for its quality and CE certification, ensuring high safety and performance standards.
  • The 2.5 inch Bi-xenon Lens provides high brightness, significantly improving road illumination.
  • When installing, ensure the headlight assembly hole is larger than 20mm in diameter for proper fitment.
  • Consider the 1:1 optical design which perfectly simulates incandescent bulbs for optimal beam distribution, enhancing visibility and safety.
Comparison image showing the 1:1 optical design of the LED bulb next to a traditional halogen bulb, highlighting similar light emitting points.
1:1 Optical Design for Optimal Beam Distribution
Comparison of 3000LM Halogen light output versus 30000LM I7S LED light output on a road at night, showing significant brightness upgrade.
300% Brightness Upgraded with I7S LED

10. Warranty & Support

Standard Warranty

RACBOX warrants to the first end-user that the product shall materially conform to RACBOX's published specifications in the user manual, subject to the terms and conditions below.

Warranty Period

The Warranty Period for a new Product is One Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.

What is Covered

The Standard Warranty provides support for Racbox ('Support') as well as replacement parts during the Warranty Period. Customers will be covered for replacement parts, partial refund, or full refund in the Warranty Period on any product due to manufacturing defects of components or workmanship.

What is Not Covered

The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The Warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error and failure to follow instructions relating to Product's use.

How to Get Warranty Service

If you have any other questions or need to request a replacement part, please feel free to contact our customer support, either by phone, email, or through our Live Support system.

RACBOX Warranty information detailing standard warranty and warranty period.
RACBOX Warranty Overview
RACBOX Warranty details covering what is and isn't covered, and how to get service.
RACBOX Warranty Coverage and Service

For a detailed user manual, please refer to the official PDF document: View User Manual (PDF)

© 2024 RACBOX. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.