1. Introduction
Thank you for choosing the Milfra Smart Light Switch. This smart switch offers convenient control of your lighting through physical buttons, voice commands, and a mobile application. It is available in both WiFi and Zigbee versions, and supports 1, 2, or 3 gangs. Please read this manual carefully before installation and use to ensure proper operation and safety.
2. Safety Information
- WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical systems.
- Always turn off power at the circuit breaker before installing or servicing the switch.
- Ensure the switch is compatible with your electrical system (AC100V-250V, 50/60Hz).
- Do not exceed the maximum load ratings: LED Lamp: Max 150W/Gang, Incandescent Lamp: Max 600W/Gang.
- This device is designed for indoor use only.
- Keep out of reach of children.
3. Package Contents
- Milfra Smart Light Switch (1, 2, or 3 Gang, WiFi or Zigbee version)
- Mounting Screws
- User Manual (this document)
- Capacitor (for no-neutral wire installations)
4. Product Overview
The Milfra Smart Light Switch features a sleek design with physical push buttons and indicator lights for each gang.

The switch is available in 1-gang, 2-gang, and 3-gang configurations.
5. Specifications
| Feature | Specification |
|---|---|
| Type | Smart Wall Light Switch |
| Model | KS-811 |
| Power Supply Mode | Neutral Wire Optional |
| Rated Current | 10A (Max) |
| Rated Voltage | AC100V-250V (50/60Hz) |
| Load Power (LED) | Max 150W/Gang |
| Load Power (Incandescent) | Max 600W/Gang |
| Wireless Frequency | 2.4GHz |
| Wireless Standard | IEEE802.11 b/g/n |
| Product Size | 116*75*35mm |
| Material | Plastic |
| Switch Type | Push Button Switch |
| Smart Device | Yes |
| Certification | RoHS, FCC, CE |
| Warranty | 1 Year |
6. Setup
6.1 Pre-installation
- Turn off power: Locate your circuit breaker and turn off the power to the switch you are replacing. Verify power is off with a voltage tester.
- Remove old switch: Carefully remove the old switch from the wall box.
- Identify wires: Identify the Line (Live), Load, Neutral (if present), and Ground wires. Label them if necessary.
6.2 Wiring Instructions
Refer to the wiring diagram below for correct connection. This switch supports both neutral wire and no-neutral wire installations. For no-neutral wire setups, it is essential to connect the included capacitor to the ceiling power supply of the first lamp in the circuit to prevent flickering.

- Connect the Line (Live) wire to the 'LINE' terminal on the smart switch.
- Connect the Load wires (for each gang) to the corresponding 'LOAD 1', 'LOAD 2', 'LOAD 3' terminals.
- Connect the Ground wire to the 'GROUND' terminal.
- For installations with a Neutral wire: Connect the Neutral wire to the 'NEUTRAL' terminal.
- For installations without a Neutral wire: Install the provided capacitor across the Live and Neutral terminals of the first light fixture in the circuit. This is crucial for stable operation and to prevent flickering.
- Secure the switch into the wall box and attach the faceplate.
- Turn on power at the circuit breaker.
6.3 App Installation and Pairing
This smart switch is compatible with the Smart Life app. Ensure your Wi-Fi network is 2.4GHz.
- Download the App: Search for "Smart Life" in the Apple App Store or Google Play Store, or scan the QR code below to download.
- Register/Login: Open the Smart Life app and register a new account or log in with an existing one.
- Enter Pairing Mode: The indicator light on the switch should be blinking rapidly (usually blue) when first powered on, indicating it's in pairing mode. If not, press and hold any button on the switch for 5-10 seconds until it blinks rapidly.
- Add Device: In the Smart Life app, tap the '+' icon (usually top right) to add a device. Select 'Lighting' > 'Switch (Wi-Fi)' or 'Switch (Zigbee)' depending on your switch version.
- Connect to Wi-Fi: Follow the in-app instructions to connect the switch to your 2.4GHz Wi-Fi network.
- Complete Pairing: Once successfully paired, you can rename the switch and assign it to a room.

7. Operating Instructions
7.1 Manual Control
Press the physical ON/OFF buttons on the switch to manually turn the connected lights on or off.
7.2 Voice Control
The Milfra Smart Light Switch is compatible with voice assistants like Amazon Alexa and Google Home. After linking your Smart Life account to your voice assistant app, you can control your lights with simple voice commands.

Example Commands:
- "Alexa, turn on the living room light."
- "Hey Google, turn off the kitchen lights."
7.3 App Remote Control
Control your lights from anywhere using the Smart Life app on your smartphone or tablet.

7.4 Scheduling
Set custom schedules to automatically turn your lights on or off at specific times and days.

7.5 Scene Patterns
Create and activate different scene patterns via the app to control multiple lights simultaneously with a single tap, eliminating the need to control each switch individually.

8. Maintenance
- Clean the switch surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the switch is kept dry and away from moisture.
- Periodically check for firmware updates in the Smart Life app to ensure optimal performance and security.
9. Troubleshooting
- Switch not responding/flickering:
- Ensure power is on at the circuit breaker.
- For no-neutral wire installations, verify the capacitor is correctly installed across the Live and Neutral terminals of the first light fixture. Incorrect wiring or missing capacitor can cause flickering.
- Check the wiring connections for looseness or incorrect placement.
- If flickering persists, try reversing the wiring order of the lights if applicable.
- Unable to pair with app:
- Ensure your Wi-Fi network is 2.4GHz. The switch does not support 5GHz Wi-Fi.
- Make sure the switch is in pairing mode (indicator light blinking rapidly). If not, press and hold any button for 5-10 seconds.
- Check your Wi-Fi signal strength at the switch location.
- Ensure your phone is connected to the same 2.4GHz Wi-Fi network during pairing.
- For Zigbee versions, ensure you have a compatible Zigbee gateway and select the correct device type in the app.
- Voice control not working:
- Verify that your Smart Life account is correctly linked to your Amazon Alexa or Google Home app.
- Check your internet connection.
- Ensure the device name in the Smart Life app matches the name you are using in voice commands.
- Zigbee vs. WiFi: This product comes in both WiFi and Zigbee versions. The WiFi version connects directly to your 2.4GHz WiFi network. The Zigbee version requires a Zigbee gateway (hub) to function. Please ensure you have the correct version for your setup.
- Zigbee Router Functionality: Zigbee switches often act as repeaters (routers) within a Zigbee mesh network, helping to extend the signal range for other distant Zigbee devices.
For further assistance, check the FAQ section within the Smart Life app.
10. User Tips
- Capacitor for No-Neutral: If you are installing the switch without a neutral wire, it is crucial to install the included capacitor at the ceiling power supply of the first lamp. This helps stabilize the circuit and prevents light flickering.
- Easy Installation: Many users find the installation process straightforward, often taking only a few minutes, especially when replacing an existing switch.
- Smart Home Integration: The switch integrates quickly and seamlessly with popular smart home platforms like Amazon Alexa and Google Home, allowing for immediate voice control. It can also connect with SmartThings via the Smart Life app without needing an additional hub for WiFi versions.
- Scheduling and Remote Control: Utilize the scheduling feature in the Smart Life app to automate your lighting, which is particularly useful for energy saving or creating routines. Remote control via the app allows you to manage your lights from anywhere.
- Gang Options: The availability of 1-gang, 2-gang, and 3-gang options makes it easy to find a suitable replacement for various existing switch configurations.
11. Warranty and Support
The Milfra Smart Light Switch comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For technical support, troubleshooting, or warranty claims, please contact your retailer or the manufacturer's customer service. Refer to the product packaging or the seller's website for contact information.
You can also find additional resources and FAQs within the Smart Life application.