PHYEE F9611W

Contents

PHYEE F9611W 1 DIN 7-inch Car Radio User Manual

Model: F9611W

Introduction

Thank you for choosing the PHYEE F9611W 1 DIN 7-inch Car Radio. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure you get the most out of your new car audio system. For a comprehensive guide, please refer to the User Manual (PDF) available at User Manual (PDF).

The PHYEE F9611W is a versatile car multimedia player featuring a retractable touch screen, wireless Apple CarPlay and Android Auto, RDS radio, Bluetooth connectivity, and multiple multimedia interfaces.

PHYEE F9611W Car Radio with retractable screen showing CarPlay interface
PHYEE F9611W Car Radio with retractable screen displaying the CarPlay interface.

Specifications

The following table outlines the key specifications of the PHYEE F9611W Car Radio:

AttributeValue
Brand NamePHYEE
Model NameF9611W
Display Size7"
Resolution1024*600
PlacementIn-Dash
Item Size1 DIN
Item Weight1.5kg
MaterialMetal and plastic
Voltage12 V
Power Supply Voltage12~14.4V DC. Negative Ground
Max Current Consumption15A
Max Output Power4X60W
Radio Response Bandwidth87.5-108.0 MHz
OSD LanguageEnglish, Chinese, Spanish, German, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Hebrew, Korean, Czech, Arabic
Special FeaturesRadio Tuner
Apple CarplayWireless / wired Apple Carplay
Android AutoWireless / wired Android Auto
Bluetooth PartBluetooth A2DP, Bluetooth handsfree
RadioAM FM RDS radio
Screen TypeManual retrachable screen
Camera InputRear view camera input
Steering wheel controlSteering wheel control
Multimedia InterfaceUSB Ports, TF card slot, Aux-in audio slot
USB ChargingUSB charging
External Microphone InputSupport external microphone input
Lighting Color7 colors
Panel TypeFixed panel
CertificationCE
OriginMainland China

Setup

Pre-Installation Test

Before installing the unit in your car, it is highly recommended to perform a pre-installation test. Due to potential impacts during long transit, the product might be affected. This test ensures the unit is functioning correctly before full installation.

  1. Connect the red and yellow wires of the power cord together and attach them to the positive pole of a 12V DC car battery.
  2. Connect the black wire of the power cord to the negative pole of the battery.
  3. Wait for 10 seconds after connecting.
  4. Press each button on the unit to check if it boots normally. If it powers on, it indicates no issues, and you can proceed with installation.
  5. If the unit does not start, re-verify all connections. If the problem persists, contact support.

Installation Steps

Follow these steps to install the car radio unit:

  1. Separate the iron frame from the host unit.
  2. Insert the iron frame into the car radio installation window.
  3. Fix the iron frame to the car using a screwdriver.
  4. Press the main unit into the iron frame until it snaps securely into place.
Installation steps for the car radio unit
Diagram illustrating the installation steps for the car radio unit.

Rear Interface Description (Wiring)

Proper wiring is crucial for the unit's functionality. Refer to the diagram below for the rear interface connections:

Rear wiring diagram of the PHYEE F9611W car radio
Detailed rear wiring diagram of the PHYEE F9611W car radio, showing ISO standard plug, power/speaker plug, rear MIC input, video outputs, radio antenna, rear USB, reversing camera input, and left/right channel outputs.
  • Red (ACC): Connects to the ignition switch (+12V).
  • Black (GND): Connects to the ground wire (B-).
  • Blue (ANT): Connects to the radio antenna.
  • Green (ILLUMINATION): Connects to the illuminate wire.
  • Brown (KEY): Connects to the steering wheel control.
  • Yellow (BATTERY): Connects to the power supply (+12V).
  • Pink (REVERSE): Connects to the reversing camera.
  • Orange (BRAKE): Connects to the parking brake cable.
  • Speaker Wires: White/White-black striped (Front Left), Gray/Gray-black striped (Front Right), Green/Green-black striped (Rear Left), Purple/Purple-black striped (Rear Right). Each speaker cable must not be grounded, shared, or touch other lines to prevent sound distortion or unit damage.

Important Note: The unit will only power on normally if both the yellow (B+) and red (ACC) lines receive 12V positive power simultaneously. The yellow (B+) line maintains power to retain memory functions.

Reversing Camera Installation

To install the reversing camera, follow these wiring instructions:

Reversing camera wiring diagram
Diagram showing the wiring for the reversing camera, including connections to the reverse light and the unit's video input.
  1. Locate the reverse control line on the unit's power line (pink wire). Connect this pink wire to the positive pole of the 12V reverse light. This will trigger the screen to turn blue when reversing.
  2. Connect the video cable from the camera to the CAM video input interface on the back of the unit.
  3. Ensure the red wire from the camera's power cable and the video cable are connected to the positive pole of the reverse lamp. The black wire of the camera's power cable is not used.

Caution: If a reversing camera is not installed, do not connect the REVERSE/BACK cable. Leave it unconnected. Improper connection can cause the unit to malfunction or automatically enter reverse mode, leading to operational issues.

Operating Instructions

Main Interface Overview

The main interface provides quick access to various functions:

  • HOME: Returns to the main interface.
  • RADIO: Enters radio mode.
  • PhoneLink: Accesses CarPlay, Android Auto, or Mirrorlink functions.
  • USB: Plays music/video/pictures from the front USB port.
  • USB2: Plays music/video/pictures from the rear USB port.
  • BT: Enters Bluetooth mobile phone music and call interface.
  • SD: Micro SD card interface for playing music/video/pictures (some models not supported).
  • AV IN: Enters external audio mode interface (some models support VIDEO IN without audio input).
  • CCD (Rear Camera): Displays the reversing camera feed.
  • Calculator: Opens the calculator.
  • Clock: Accesses clock settings.
  • Calendar: Opens the calendar interface.
  • Setup: Enters the system settings interface.
Main interface and various function screens of the car radio
The main interface of the car radio, showing icons for various functions like Radio, PhoneLink, USB, BT, SD, AV IN, CCD, Calculator, Clock, Calendar, and Setup.

Radio Function

The radio function allows you to listen to FM/AM stations with RDS support.

Radio interface of the car radio
The radio interface, showing frequency display, band selection, local/DX, scan, PTY, and RDS options.
  • Tuning: Short press <</>> to automatically search for the next station. Long press to manually search (0.05MHz steps).
  • Pre-stored Stations (P1-P6): Long press to save the current station. Short press to recall. The unit can store up to 18 radio stations.
  • FM Band (FM1-FM3): Switch between different FM bands.
  • AS (Auto Search): Automatically searches and stores full-band radio stations.
  • ST/MO: Toggles between Stereo and Mono reception.
  • PS (Program Service): Browses radio stations.
  • LOC/DX: Toggles between local (strong signals) and distant (weaker signals) broadcast modes.
  • EQ: Accesses the sound effect settings.
  • Back Button: Returns to the previous screen.

Music Function

Play music from USB drives or SD cards with various playback options.

Music playback and sound setup interface
Music playback screen with controls and the sound setup (equalizer) interface.
  • Previous/Next Track: Skips to the previous or next song.
  • Pause/Resume: Pauses or resumes playback.
  • Repeat All/Sequential Play: Toggles between repeating all songs, single song, or playing sequentially.
  • Random Play: Shuffles the playlist.
  • File List: Returns to the list of music files.
  • Playback Progress Bar: Drag to adjust the playback position.
  • EQ (Equalizer): Accesses sound effect settings (Jazz, Classic, Rock, Pop, Flat, User custom).

Photo Function

View images stored on USB drives or SD cards.

  • Previous/Next Picture: Navigates through images.
  • Pause/Resume Playback: Pauses or resumes slideshow.
  • Zoom In/Out: Adjusts image magnification.
  • Rotate Picture: Rotates the image.
  • File List: Returns to the list of image files.

Video Function

Play videos from USB drives or SD cards.

  • Previous/Next Track: Skips to the previous or next video.
  • Pause/Resume Playback: Pauses or resumes video.
  • Loop Video Playback: Repeats the current video.
  • Sequential Play/Random Play: Toggles between playing videos sequentially or randomly.
  • File List: Returns to the list of video files.

Tip: If a brake warning occurs and prevents video playback, turn off the brake warning switch in the system settings to play videos normally.

Bluetooth Function

Connect your mobile phone via Bluetooth for music streaming and hands-free calls.

  • Call Interface: Accesses the dial pad for making calls.
  • Contact Interface: Views phone contacts (after syncing).
  • Call History Interface: Views recent calls.
  • BT Music Interface: Streams music from your phone.
  • BT Pairing Interface: Manages Bluetooth connections.
  • Backspace Key: Deletes characters in the dial pad.
  • Dial Keypad Interface: Displays the numeric keypad.
  • Answer/End Call Key: Manages calls.
  • BT Music Prev/Next Track: Controls music playback.
  • Pause Music/Resume Playback: Controls music playback.

Connection Method:

  1. Power on the car radio unit.
  2. On your mobile phone, enable Bluetooth and search for devices.
  3. When "SWL-BT" (or similar, e.g., "Carkit") appears in the device list, select it to connect. The default PIN is "0000" if required.

This feature allows you to project your phone screen onto the car radio display via a USB data cable.

CarPlay and Android Auto interfaces on the car radio
Demonstration of wired/wireless CarPlay and Android Auto functionality with connected smartphones.

Apple CarPlay

  1. Connect your iPhone to the unit using a USB data cable.
  2. The unit will automatically enter the CarPlay interface.
  3. To re-enter CarPlay after exiting, press the PhoneLink icon on the HOME screen.

Android Auto

This feature requires a mobile phone with Android 6.0 or higher and a valid USB data cable connection. Google Play services may need to be available locally.

  1. Download and install the "Android Auto" software from Google Play.
  2. Connect your Android phone to the unit using a USB data cable (USB debugging mode is not necessary).
  3. The unit will automatically enter the Android Auto interface.

For Android devices, after connecting via USB, you will be prompted to install the Mirrorlink software. After installation, reconnect the USB cable to enter screen mirroring mode. The screen can be operated from both the car radio and the phone. Note that only image transfer is successful initially; sound is transmitted after Bluetooth connection.

When an iPhone is connected, its screen content is projected onto the car radio, and sound is transmitted in sync.

AV IN (Video In) Function

  • AV IN: Connect an external audio player (e.g., mobile phone, iPod) via the 3.5MM Front AUX port.
  • VIDEO IN: Connect a rear video input via RCA jack (for video input without audio).

Steering Wheel Controls

The unit supports learning steering wheel controls to map car buttons to unit functions.

  1. Press and hold a function key on your steering wheel.
  2. On the car screen, click the desired function key. The screen key will remain highlighted, indicating successful learning.
  3. Repeat for other buttons.
  4. Press the confirm button to complete the setup.
  5. If an error occurs or re-learning is needed, press the reset button and repeat the process.

System Settings

Access various settings to customize your car radio experience.

Basic Setup

  • Beep: Toggles key tone.
  • Reverse Mute: Mutes sound when reversing.
  • Driving Ban Video: Controls video playback while driving.
  • Animation: Adjusts interface animation effects.
  • Mirror Camera: Sets camera mirror options.
  • Color Lamp Mode: Configures key light colors.
  • Color Lamp Interval: Sets the interval for color changes.
  • Restore Factory: Resets to factory settings.

Sound Setup

Adjust audio settings for optimal sound quality.

  • Loudness: On/Off.
  • Balance: Adjusts audio balance.
  • Equalizer (EQ): Presets for Jazz, Classic, Rock, Pop, Flat, and User custom settings (30Hz to 16KHz, +/-10dB).

Display Settings

Customize display parameters:

  • Brightness
  • Contrast
  • Hue
  • Saturation
  • Reset Parameter: Resets display settings to default.

Background Image Settings

Choose from available wallpapers to customize the background image.

Language Settings

Select the desired OSD language from a variety of options including English, Chinese, Spanish, German, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Hebrew, Korean, Czech, and Arabic.

Screen Saver Settings

Configure screen saver parameters such as switch (on/off), time interval, and preview effect.

Time Settings

Set the year, month, day, hour, and minute for the unit's clock.

Troubleshooting

This section addresses common issues you might encounter with your car radio.

1. Cannot Boot Normally

  • Incorrect Wiring: Ensure all three power lines (Yellow, Red, Black) are correctly connected. Yellow to positive, Red to key control, Black to negative. If only two lines are connected, the unit will not start.
  • Non-Standard Car Wiring: If the original car wiring colors do not match standard connections, connecting by color may cause damage.
  • Incorrect Plug Usage: Do not plug the original car plug directly into the new unit if it's not compatible; this can prevent startup or cause damage.
  • Blown Fuse: Check the fuse on the yellow line. If it's broken, replace it. If the fuse repeatedly blows, it indicates a short circuit in the unit's protection circuit. Seek professional guidance for repair.
  • Power Test: Twist the yellow and red wires together, connect to 12V positive, and black to negative. Press the power button. If it boots, the car's wiring is incorrect. If not, the unit may be faulty.

2. Automatic Shut-down

  • Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, it may cause automatic shutdown. Correct the wiring.
  • Unstable Voltage: Test the unit with a stable 12V-5A power supply. If it still shuts down, the unit is faulty. If not, replace your car's power supply.

3. There is Noise

  • Speaker Power Too Small: If the original speaker power is low, noise may occur at high volumes. Avoid excessively high volumes.
  • Grounded Speaker Cable: Ensure speaker cables are not grounded. Connect the speaker cable directly to the unit's speaker cable.

4. Remote Control Cannot Be Used

  • Test Method: Use a mobile phone camera to view the remote control's IR emitter while pressing buttons. If the IR light is not visible, replace the battery. If it is visible, the remote control is functional.

5. Settings Cannot Be Saved (No Memory)

  • Incorrect Wiring: Ensure the yellow line (B+) is connected to constant positive power and the red line (ACC) to switched positive power. If they are reversed, swap them.

6. Bluetooth Does Not Work

  • Connection Issue: Turn on the unit, enable Bluetooth on your phone, search for "SWL-BT" (or "Carkit"), and connect.

7. The Product Emits Smoke

  • Internal Circuit Damage: Immediately replace the FUSE. If the problem persists, the internal circuit may be burned. Contact support for service.

8. The Sound Cannot Be Adjusted

  • Unit Reset: Reset the unit or unplug/replug the power cord.
  • Faulty Volume Knob: The volume knob may be broken and needs replacement.

9. Reversing Camera Does Not Display

  • Incorrect/Missing Wiring: Verify all camera connections as per the installation instructions.
  • Faulty Camera: If the camera's lamp (when properly wired) does not light up, the camera may be broken and needs replacement.

10. USB Devices Cannot Be Played

  • Format USB Drive: Format the USB flash drive to FAT32. Re-download one or two songs and try again.
  • Faulty USB Drive: If the issue persists, replace the USB flash drive.

11. Radio Does Not Receive Stations

  • Antenna Connection: Ensure the antenna plug is fully inserted. Check for disconnected antenna or line.
  • Search Stations: Use the AS button for automatic search or manually tune.
  • Antenna Issue: If the above steps don't work, unplug the antenna and insert a screwdriver or metal strip into the antenna port to test.

12. No Sound Right After Installation

  • Wiring Error/Short Circuit: This is usually due to incorrect wiring or a short-circuited original car speaker wire.
  • Check Speaker Cables: Reconnect any short-circuited speaker cables.
  • Speaker Cable Compatibility: If your original car has only 2 speaker cables and the unit requires 4, you may need to re-route the car's wiring. Each speaker requires two wires.

13. No Sound After A While

  • Test External Speaker: Disconnect all speaker cables from the unit (do not remove them from the car) and connect an external speaker to the gray and purple tail lines. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

User Tips

  • DAB+ USB Sticks: The manual does not explicitly state compatibility with DAB+ USB sticks for the backside USB port. Users interested in DAB+ functionality should verify compatibility with the manufacturer or seller.
  • Screen Mechanism: The screen is manually retractable. Ensure it is handled gently when extending or retracting to prevent damage.

Maintenance

To ensure the longevity and optimal performance of your PHYEE F9611W car radio, follow these general maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior of the unit. Avoid using harsh chemicals or abrasive cleaners, which can damage the display or finish.
  • Temperature: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Software Updates: Keep the unit's software updated if new versions are released by the manufacturer to ensure optimal performance and compatibility with new devices.

Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for warranty purposes.

The manufacturer provides support for product-related inquiries and technical assistance. Please refer to the contact information provided at the time of purchase or on the official PHYEE website.

© 2023 PHYEE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.