FeiyuTech SCORP Mini 2

Contents

FeiyuTech SCORP Mini 2 Handheld Gimbal User Manual

Instructions (V1.0.1)

FeiyuTech SCORP Mini 2 Gimbal with camera and accessories

FeiyuTech SCORP Mini 2 Handheld Gimbal shown with a mirrorless camera and various accessories.

1. Overview

The FeiyuTech SCORP Mini 2 is a versatile 3-axis handheld gimbal designed for stable and smooth footage with mirrorless cameras, action cameras, and smartphones. It features a lightweight design, quick installation system, and a built-in AI tracker for enhanced shooting capabilities.

Product Diagram

Diagram of FeiyuTech SCORP Mini 2 gimbal with numbered parts

Detailed diagram of the FeiyuTech SCORP Mini 2 gimbal, highlighting its various components.

Gimbal Components
No.ComponentNo.Component
1Power button20Slide arm
2Trigger button21Slider lock
3Handle22Roll axis
4F2 button23Roll lock
5Touch screen24Tilt axis
6Shutter button25Tilt lock
7Mode button26Cross arm
8Joystick271/4 inch thread hole
9F1 button28Camera for tracking module
10FPV button29Indicator light for tracking module
11Knob function switching button30Extension port
12Multifunction knob31Camera control port/USB-C power output port
13Anti-drop lock for slider32Anti-drop lock for sliding arm
14Quick release plate lock33M6 threaded hole
15Fixed plate34Lens holder
16Slider lock35Lens holder screw
17Anti-drop lock36Versatile arm
18Quick release plate37Pan axis
19Slider38Pan lock

Note: The Camera control port/USB-C power output port supports charging for shooting devices compatible with the USB power supply protocol.

2. Getting Started (Setup)

2.1 Charging

Fully charge the battery before using the gimbal for the first time. Use a USB-C cable for charging. The gimbal supports quick charge with charging power up to 18W.

Gimbal charging port

Image showing the USB-C charging port on the gimbal.

2.2 Adjusting the Gimbal to Balancing Position

The gimbal is folded by default. Unlock all three axes, adjust the gimbal to the balancing position, and then lock the three axes.

Diagram showing folded and balancing positions of the gimbal

Illustration of the gimbal transitioning from its folded state to the balancing position, with numbered steps for unlocking and adjusting axes.

2.3 Installing Fixing Accessories

When using cameras, phones, and other shooting devices, you need to install the fixing accessories first.

Various fixing accessories for the gimbal

Image displaying the fixed plate, slider, quick release plate, lens holder, GoPro adapter, and smartphone holder.

Accessory Installation Reference
Equipped DeviceFixing AccessoriesInstallation Reference
Mirrorless cameraFixed Plate [1], Slider [2], Quick release plate [3], Lens holder [4]Horizontal: [1]+[2]+[3]+[4]
Vertical: [2]+[3]+[4]
Pocket cameraFixed Plate [1], Slider [2], Quick release plate [3]Horizontal: [1]+[2]+[3]
Vertical: [2]+[3]
Action cameraFixed Plate [1], Slider [2], Quick release plate [3], GoPro adapter [5]Horizontal: [1]+[2]+[3]+[5]
Vertical: [2]+[3]+[5]
SmartphoneSmartphone holder [6][6]

To install the fixed plate [1]: Unlock the lock, slide the plate into the slot, and then lock it.

Steps to install the fixed plate on the gimbal

Visual guide for attaching the fixed plate to the gimbal.

To install the slider [2] or smartphone holder [6]: Follow the same unlock, slide, and lock procedure.

Steps to install the slider or smartphone holder

Visual guide for attaching the slider or smartphone holder to the gimbal.

To remove the fixed plate [1]: Unlock the lock, unlock the anti-drop lock, and simultaneously slide the fixed plate upward out of the slot.

Steps to remove the fixed plate from the gimbal

Visual guide for removing the fixed plate from the gimbal.

To remove the slider [2]: Unlock the lock, unlock the anti-drop lock, and simultaneously slide the slider upward out of the slot.

Steps to remove the slider from the gimbal

Visual guide for removing the slider from the gimbal.

3. Mounting the Camera/Smartphone

Before mounting any device, ensure the gimbal is powered off or in sleep mode and adjusted to the gimbal balancing position.

3.1 Mounting the Camera

Ensure your camera is ready for shooting: lens installed, lens cover removed, memory card and battery inserted, and battery fully charged.

3.1.1 Attach the Quick Release Plate

Attach the quick release plate to your camera by tightening the screw. If your camera lacks a 1/4-20 inch screw hole, use a mount adapter with one. For smartphones, use the optional smartphone holder.

Attaching quick release plate to camera

Diagram showing how to attach the quick release plate to a camera.

3.1.2 Install Lens Holder (Optional)

If using a long or heavy lens, install the lens holder on the quick release plate, ensuring the rubber part is directly under the lens.

Installing optional lens holder

Diagram illustrating the installation of the optional lens holder.

3.1.3 Mount Camera on Gimbal

Horizontal mounting: Unlock the lock, slide the camera into the slot, lock it, loosen the anti-drop lock, slide the camera as indicated, adjust for balance, then tighten the anti-drop lock. Push the camera against the tilt axis and adjust its position for optimal balance.

Horizontal mounting of camera on gimbal

Visual guide for horizontally mounting a camera onto the gimbal.

Vertical mounting: After installing the slider, unlock the lock, slide the camera into the slot in the indicated direction, adjust for balance, then tighten the lock.

Vertical mounting of camera on gimbal

Visual guide for vertically mounting a camera onto the gimbal.

3.2 Install the Action Camera

Ensure the action camera is ready: waterproof case installed, memory card inserted, battery in place, and fully charged.

3.2.1 Attach the Quick Release Plate

Mount the action camera with the GoPro adapter and screw, then attach the quick release plate to the 1/4-inch screw hole on the bottom. Tighten the camera fixed screw.

Attaching quick release plate to action camera

Diagram showing how to attach the quick release plate to an action camera using a GoPro adapter.

3.2.2 Mount the Action Camera on Gimbal

Horizontal mounting: Unlock the lock, slide the action camera into the slot, tighten the lock, loosen the anti-drop lock, slide the camera as indicated, adjust for balance, then tighten the anti-drop lock.

Horizontal mounting of action camera on gimbal

Visual guide for horizontally mounting an action camera onto the gimbal.

Vertical mounting: After installing the slider, unlock the lock, slide the action camera into the slot in the indicated direction, adjust for balance, then tighten the lock.

Vertical mounting of action camera on gimbal

Visual guide for vertically mounting an action camera onto the gimbal.

3.3 Mounting a Smartphone

Remove your phone case before mounting. Attach the smartphone holder, rotate it to the desired horizontal or vertical position, open the holder, and place your phone in the center. Note: The gimbal must be powered off or in sleep mode before switching between horizontal or vertical mounting.

Smartphone mounting on gimbal

Diagram showing horizontal and vertical mounting of a smartphone on the gimbal.

3. Gimbal Balancing

Before shooting, balance the gimbal. Ensure the camera and lens are ready, and the gimbal is powered off or in sleep mode. It is recommended to hold the camera first, then move the slide arm, cross arm, and vertical arm.

3.1 Balancing the Tilt Axis

3.1.1 Balancing the Vertical Tilt

  1. Unlock the tilt lock and loosen the slide arm lock.
  2. Rotate the tilt axis so the camera lens points upward. Observe which direction the lens tilts.
  3. If the lens tilts to one side, move the slide arm in the opposite direction until the camera is steady and pointing upward.
  4. Tighten the slide arm lock while holding the camera.
Balancing the vertical tilt axis

Diagram illustrating the steps to balance the vertical tilt axis.

3.1.2 Adjust Depth for the Tilt Axis

  1. Rotate the tilt axis so the camera lens points forward. Observe which direction the lens tilts.
  2. If the lens tilts to one side, unlock the quick release plate safety lock and move the quick release plate in the opposite direction until the camera is steady and pointing forward.
  3. Lock the quick release plate safety lock while holding the camera.
Adjusting depth for the tilt axis

Diagram illustrating the steps to adjust the depth for the tilt axis. The tilt axis is balanced when the camera is steady while tilted up or down by 45°.

3.2 Balancing the Roll Axis

  1. Unlock the roll lock and observe which direction the camera tilts.
  2. If the camera tilts to one side, loosen the cross arm lock knob and move the cross arm in the opposite direction until the camera is still and horizontal to the ground.
  3. Tighten the cross arm lock knob.
Balancing the roll axis

Diagram illustrating the steps to balance the roll axis. The roll axis is balanced when the camera can stay still and horizontal to the ground.

3.3 Balancing the Pan Axis

  1. Unlock the pan lock. Hold the tripod and tilt the gimbal forward until it is horizontal to the ground.
  2. If the camera tilts to one side, loosen the vertical arm lock knob and move the vertical arm in the opposite direction until the camera is still and horizontal to the ground.
  3. Tighten the vertical arm lock knob.
Balancing the pan axis

Diagram illustrating the steps to balance the pan axis. The pan axis is balanced when the camera can stay still and horizontal to the ground.

4. Power ON/OFF & Wake Up

4.1 Power ON/OFF

  • Before powering on, ensure the gimbal is balanced and all three axes are unlocked.
  • If axes are not unlocked, the gimbal will enter sleep mode for protection. Single tap the power button to wake it up after unlocking all axes.
  • Important: Set motor power after first power-on or after changing a camera/lens.
  • To power on/off: Long press the power button until you hear a beep sound.
Power button location and function

Image showing the power button and its function for powering on/off the gimbal.

4.2 Lock/Unlock Screen

  • Lock screen: Single tap the power button.
  • Unlock screen: Single tap the power button again.
Gimbal screen locked and unlocked states

Screenshots of the gimbal's display showing locked and unlocked states.

4.3 Sleep/Wake Up

  • Sleep: Double tap the power button.
  • Wake up: Single tap the power button or tap the sleep icon on the screen.
Gimbal screen with sleep/wake up options

Screenshot of the gimbal's display showing the sleep icon and other mode options.

5. Function and Modes Introduction

5.1 Follow Modes

  • PF (Pan Follow - Default mode): Only the pan axis follows the movement of your hand.
  • PTF (Pan and Tilt Follow): Both pan and tilt axes follow your hand movement, but the roll axis remains fixed.
  • FPV (First Person View): Pan, tilt, and roll axes all follow your hand movement.
  • Lock: All three axes are fixed, and the camera direction remains constant.
  • FFW (Flash Follow): All three axes follow your hand movement at a high speed.
Diagrams of different follow modes (PF, PTF, FPV, Lock, FFW)

Illustrations demonstrating the movement of the gimbal in PF, PTF, FPV, Lock, and FFW modes.

5.2 Other Functions

  • Auto Rotation: The camera automatically rotates based on user-defined speed and direction, useful for "Inception-like" shots.
  • Portrait Mode: For recording vertical videos or live streaming.
  • Selfie Mode: The camera turns 180° horizontally for selfie shooting.
  • Track Video: Record track video according to set waypoints.
  • Manual Lock: Manually move the camera to a desired position and hold for half a second to save new tilt/pan positions.

6. App Connecting

Download the App

For mirrorless, pocket, or action cameras, download "Feiyu SCORP". For smartphones, download "Feiyu ON". Scan the QR codes below or search in your app store.

  • Feiyu SCORP: Requires iOS 11.0+ or Android 6.0+.
  • Feiyu ON: Requires iOS 12.0+ or Android 8.0+.
QR code for Feiyu SCORP iOS app

Feiyu SCORP (iOS)

QR code for Feiyu ON iOS app

Feiyu ON (iOS)

QR code for Feiyu SCORP Android app

Feiyu SCORP (Android)

QR code for Feiyu ON Android app

Feiyu ON (Android)

6.1 Connect App

Turn on the gimbal and your smartphone's Bluetooth. Run the appropriate Feiyu app and follow the prompts to connect. Once connected, you can control the gimbal, switch modes, set parameters, and update firmware.

6.1.1 Feiyu SCORP App Interface Overview

Feiyu SCORP App interface diagram

Diagram showing the main interface of the Feiyu SCORP App with numbered sections.

  • [1] Gimbal control access: Displays product name and battery. Tap to control gimbal, switch modes, recenter, adjust horizontal angle.
  • [2] Disconnect device: Tap to disconnect.
  • [3] Scenarios: Access auto rotation, panorama, timelapse, track video.
  • [4] Button settings: Customize trigger button function.
  • [5] Knob settings: Set multifunction knob control (axes, electronic focus, focus motor).
  • [6] Motor power settings: Adjust motor power manually or use auto tune.
  • [7] Follow speed: Select preset (Slow/Med/Fast) or custom follow speed.
  • [8] Camera settings: Adjust camera aperture, shutter speed, ISO.
  • [9] Horizon calibration: Calibrate gimbal automatically or manually.
  • [10] More: Set boot silent, disable selfie, manual lock, firmware info/update, restore defaults.
  • [11] Back: Return to home page.
  • [12] Joystick settings: Set joystick speed and pan/tilt axis inversion.
  • [13] Recenter: Recenter the gimbal.
  • [14] Flash follow (FFW): Enter Flash follow mode.
  • [15] Portrait mode: Enter portrait mode.
  • [16] Selfie mode: Enter selfie mode.
  • [17] Adjust horizontal angle: Slide to control roll axis.
  • [18] Virtual joystick: Control pan and tilt axis.
  • [19] Lock mode: Enter lock mode.
  • [20] Shutter: Take photo or start/stop video recording.
  • [21] Switch between photo/video mode: Toggle between modes.
  • [22] Pan follow (PF): Enter pan follow mode.
  • [23] Pan and tilt follow (PTF): Enter pan and tilt follow mode.
  • [24] FPV: Enter FPV mode.
  • [25] Motion sensing mode: Control pan and tilt axis by smartphone movement (cannot switch follow modes).

6.1.2 Feiyu ON App Interface Overview

Feiyu ON App interface diagram

Diagram showing the main interface of the Feiyu ON App with numbered sections.

  • [1] Back: Return to previous menu.
  • [2] Album: Enter album.
  • [3] Gimbal control: Enter remote control interface.
  • [4] Gimbal information: Check gimbal and battery status, update firmware.
  • [5] Switch between photo/video mode: Toggle between modes.
  • [6] Switch usage scenarios: Access various photo/video modes (panorama, timelapse, dolly zoom, etc.).
  • [7] Shutter: Take photo or start/stop video recording.
  • [8] Switch between front and back cameras: Toggle camera view.
  • [9] More: Support photo timer, beauty, flash, auxiliary line, peak assist, overexposure tips, filter, AI, and gesture settings.
  • [10] Horizontal angle: Slide to control roll axis.
  • [11] Recenter: Recenter the gimbal.
  • [12] Virtual joystick: Control pan and tilt axis.
  • [13] Lock Mode: Enter lock mode.
  • [14] Pan follow (PF): Enter pan follow mode.
  • [15] Pan and tilt follow (PTF): Enter pan and tilt follow mode.
  • [16] FPV: Enter FPV mode.

7. Operation

7.1 Button Operation

7.1.1 Power Button

  • Long press: Power on/off.
  • Single tap: Wake up (from sleep mode) / Battery level display (when powered off).
  • Double tap: Enter sleep mode.
Power button on gimbal

Image showing the power button on the gimbal handle.

7.1.2 Mode Button

  • Single tap: Cycle through PF (Default) / PTF / FPV modes.
  • Tap five times: Horizon calibration.
Mode button on gimbal

Image showing the mode button on the gimbal handle.

7.1.3 Trigger Button

  • Single tap: Face tracking (in Feiyu ON App).
  • Double tap: Recenter.
  • Triple tap: Enter/Exit selfie mode (pan axis turns 180°).
  • Tap four times: Switch roll axis to back/front (useful for reducing obstruction).
  • Press and hold: Lock mode (release to exit).
Trigger button on gimbal

Image showing the trigger button on the gimbal handle.

7.1.4 Joystick

  • Push: Control movement of tilt and pan axes.
  • Push: Control album (in Feiyu ON App).
Joystick on gimbal

Image showing the joystick on the gimbal handle.

7.1.5 Shutter Button

  • Camera Connected:
    • Press half way: Focus.
    • Single tap (fully): Start/stop recording.
    • Long press (fully): Take photo.
  • Phone Connected (Feiyu ON App):
    • Press half way: Focus.
    • Single tap (fully): Shutter.
    • Long press (fully): Switch between video/photo mode.
Shutter button on gimbal

Image showing the shutter button on the gimbal handle.

7.1.6 FPV Button

  • Single tap: Enter/Exit FPV mode.
FPV button on gimbal

Image showing the FPV button on the gimbal handle.

7.1.7 F1 Button

  • Single tap: Enter/exit album (in Feiyu ON App).
  • Double tap: Enter/exit portrait mode.
  • Triple tap: AI power on/off.
  • Long press: Enter/Exit AI tracking (with AI Power enabled).
F1 button on gimbal

Image showing the F1 button on the gimbal handle.

7.1.8 F2 Button

  • Single tap: Lock/Unlock screen (home page) / Return to home page (other pages).
  • Double tap: Enter FFW mode.
  • Long press: Enter motor power auto tuning.
F2 button on gimbal

Image showing the F2 button on the gimbal handle.

7.1.9 Knob Function Switching Button

  • Single tap: Switch control object while controlling 3 axes (Tilt/Pan/Roll). When in electronic focus/zoom control, single tap to switch between electronic focus and electronic zoom (Feiyu ON App required for smartphone).
  • Long press: Cycle through control options for multifunction knob (3 axes movement / Electronic focus / Focus motor).
Knob function switching button on gimbal

Image showing the knob function switching button on the gimbal handle.

7.1.10 Multifunction Knob

  • Turn: Control roll, tilt, and pan axes movement; control focus; control focus motor; adjust parameters in the touch screen.
Multifunction knob on gimbal

Image showing the multifunction knob on the gimbal handle.

7.1.11 Key Combinations

  • Long press F1 button + F2 button: Clear Bluetooth.

7.2 Touch Screen Operation

The touch screen provides quick access to various settings and modes.

Home Page Overview

Gimbal touch screen home page

Screenshot of the gimbal's touch screen home page.

  • [1] Landscape/Portrait mode status: Indicates current orientation.
  • [2] Current battery level: Shows gimbal battery status.
  • [3] Bluetooth connection: Icon appears when Bluetooth is connected.
  • [4] Motor power: Auto tune or manually adjust motor power.
  • [5] Follow speed: Select or customize follow speed profiles.
  • [6] Follow mode: Select PF, PTF, FPV, Lock, FFW.
  • [7] Scenario: Select timelapse, auto rotation, panorama, portrait mode, selfie mode, track video.

Navigation

  • Swipe from right to left: Access Joystick settings, Gimbal settings, Bluetooth settings.
  • Swipe from left to right: Access Camera settings (aperture, ISO, shutter speed, resolution, FPS).
  • Swipe up: Access Multifunction knob settings (control object, damp, speed, smooth, sound).
  • Return to previous menu: Swipe right.

7.3 Function Operation

7.3.1 Motor Power Settings

⚠ Please set motor power first after powering on the gimbal for the first time or after changing a new camera/lens.

  • Auto tune: Gimbal automatically tunes motor power based on load.
  • Adjust motor power manually: Adjust motor power for each axis.
    • If gimbal vibrates at high frequency, motor power is too strong.
    • If gimbal shakes with low frequency and large amplitude, motor power is too weak.
Motor power settings screen

Screenshot of the motor power settings interface, showing auto tune and manual adjustment options.

7.3.2 Follow Speed Settings

Tap "Follow speed" on the home page to select preset profiles (Slow/Med/Fast) or customize follow speed and dead zone.

Follow speed settings screen

Screenshot of the follow speed settings interface, showing different speed options.

7.3.3 Follow Mode Settings

Tap the lower left icon on the home page to select follow modes (PF, PTF, FPV, Lock, FFW).

Follow mode settings screen

Screenshot of the follow mode settings interface.

7.3.4 Timelapse

Select "Scenario" > "Timelapse" on the home page. Choose Motionlapse, Static timelapse, or Hyperlapse and set parameters.

  • Motionlapse: Shoot timelapse photography according to set waypoints.
  • Static timelapse: Shoot timelapse photography with a fixed shooting angle.
  • Hyperlapse: Shoot timelapse photography while moving.
Timelapse settings screen

Screenshot of the timelapse settings interface.

7.3.5 Auto Rotation

Select "Scenario" > "Auto rotation". The tilt axis rotates 90° counterclockwise. Set rotation speed, direction, and rotational number. Exit by swiping left to right.

Auto rotation settings screen

Screenshot of the auto rotation settings interface.

7.3.6 Panorama

Select "Scenario" > "Panorama". Choose a panorama mode (3x3, 180°, Custom) to shoot a series of still images for later stitching.

  • 3x3: Takes 9 images (3 layers of 3).
  • 180°: Takes 4 lateral images.
  • Custom: Customize shooting angle, focal length, overlap, and interval.
Panorama settings screen

Screenshot of the panorama settings interface.

7.3.7 Portrait Mode

Select "Scenario" > "Portrait mode". The tilt and pan axis rotate 90° counterclockwise. Hold the handle to keep the lens horizontal. Exit by tapping the icon at the bottom of the screen.

7.3.8 Selfie Mode

Select "Scenario" > "Selfie mode". The gimbal turns 180° horizontally. Exit by tapping the icon at the bottom of the screen.

To disable selfie mode via button: Swipe left to right on the home page, select "Gimbal settings", enable "disable selfie switch". Selfie mode will not activate if the trigger button is tapped three times.

Selfie mode settings screen

Screenshot of the selfie mode settings interface.

7.3.9 Track Video

Select "Scenario" > "Track video" to capture video with up to 10 waypoints. Use the joystick or manually move the camera to desired positions, then tap "+" to confirm each waypoint. Select a waypoint number to check its position or tap the trash icon to delete it. After setting smoothness, tap "Start shooting".

Track video settings screen

Screenshot of the track video settings interface, showing waypoint selection and shooting controls.

7.3.10 Joystick Settings

Swipe right to left on the home page, select "Joystick Settings". Adjust Joystick Speed for pan/tilt axis control and enable/disable inverted control.

Joystick settings screen

Screenshot of the joystick settings interface.

7.3.11 Gimbal Settings

Swipe right to left on the home page, select "Gimbal settings". Options include: Disable selfie (gimbal button control for selfie mode), Manual lock (pan/tilt axis), and Horizon calibration (auto/manual).

Gimbal settings screen

Screenshot of the gimbal settings interface.

7.3.12 Bluetooth Settings

Swipe right to left on the home page, select "Bluetooth Settings".

  • Connect Camera/GoPro: Enable "Camera Control", turn on camera's Bluetooth, choose camera name on gimbal screen. An icon will appear upon successful connection.
  • Connect Smartphone: View gimbal's Bluetooth name, turn on phone's Bluetooth, locate gimbal's name. An icon will appear upon successful connection.
Bluetooth settings screen

Screenshot of the Bluetooth settings interface.

7.3.13 Backlight Settings

Swipe right to left on the home page, select "Backlight Settings" to adjust screen brightness (High, Medium, Low).

Backlight settings screen

Screenshot of the backlight settings interface.

7.3.14 AI Tracking

Triple tap the F1 button or swipe right to left on the home page > "More Settings" to toggle "AI Power" on/off. When AI power is on, the tracking module indicator light will be solid red.

AI tracking settings screen

Screenshot of the AI tracking settings interface.

AI Gesture Control (when AI Power is ON)
  • OK gesture (Left or right hand): Start/Stop tracking. Green light for tracking, red for standby. Gestures must be separated by 3 seconds.
  • Thumbs opposite direction: Stop tracking. Enters standby mode with red light.
  • Spread palm (Left or right hand): Shutter. Takes photo or starts recording after 3-second countdown. Repeat gesture to stop recording.
  • Double L-Shaped gestures: Custom framing. Green light blinks fast. Perform again when subject is in desired position to complete framing.
AI gesture control guide

Diagram illustrating various AI gesture controls for the gimbal.

AI Button Control
  • Long press F1 button: Start tracking/Stop tracking.
  • Triple tap F1 button: AI power on/off.

7.4 Control Ports

The gimbal features a camera control port and an extension port on the fixed plate for controlling cameras and other extension devices like focus motors.

Gimbal control ports diagram

Diagram showing the location of the camera control port and extension port.

Connecting camera with shutter cable

Illustration of connecting a camera to the gimbal using a shutter cable.

8. Maintenance

Storage and Care

  • Keep the product out of reach of children and pets.
  • Do not leave the product near heat sources (furnace, heater) or inside a vehicle on hot days.
  • Store the product in a dry environment.
  • Do not overcharge or overuse the battery to prevent damage.
  • If not used for a long time, charge it at least once a month.
  • Do not use the product when the temperature is too high or too low.

General Notice

  • Ensure motor spinning is not blocked when powered on.
  • Do not allow the product to contact water or other liquids unless it is marked waterproof/splash-proof.
  • Do not disassemble the product except for marked detachable parts. Repairs should be done by FeiyuTech after-sales or authorized service centers.
  • Prolonged continuous operation may cause the product surface temperature to rise; operate carefully.
  • Do not drop or strike the product. Contact Feiyu After-sales support if the product is abnormal.

9. Troubleshooting

Firmware Update Issues

If you encounter problems updating the firmware, consider the following:

  • Ensure you are using a 2.4 GHz Wi-Fi network, not 5 GHz.
  • The Wi-Fi network name (SSID) should contain only English letters. Avoid special characters.
  • Verify the Wi-Fi password is correct and contains no spaces.
  • If the update fails, try restarting the stabilizer.

Gimbal Vibration or Shaking

  • If the gimbal vibrates at a high frequency, the motor power might be too strong. Adjust it in the motor power settings.
  • If the gimbal shakes with low frequency and large amplitude, the motor power might be too weak. Adjust it in the motor power settings.
  • Ensure the gimbal is properly balanced with the mounted camera/smartphone.

Gimbal Enters Sleep Mode Unexpectedly

  • Ensure all three axes are unlocked before powering on or operating the gimbal. If any axis is locked, the gimbal will enter sleep mode for protection.

10. Specifications

FeatureDetail
Product NameFeiyu SCORP-Mini 2 3-Axis Handheld Gimbal for Camera
Product ModelFeiyuF1-2
Rotatable Range (Tilt)+163° ~ -155° (±3°)
Rotatable Range (Roll)+70° ~ -250° (±3°)
Rotatable Range (Pan)360°
Controllable Range (Tilt)+137° ~ -60°
Controllable Range (Roll)+40° ~ -40°
Controllable Range (Pan)360°
Size (Gimbal folded)247.6 * 59.8 * 234.8mm
Size (Gimbal unfolded)210.1 * 133.7 * 296mm
Weight (Mainbody)About 852g
Payload CapabilityAbout 1200g (Well-balanced)
Battery Life≤ 10 Hours*
Battery Capacity2500mAh
Operating Voltage6.8V-8.4V
MaterialPolymer synthetic resin, aluminum alloy
CommunicationBluetooth, Wired
APP Supported LanguagesJapanese, French, German, Spanish, Korean, Portuguese, Brazilian Portuguese, English, Simplified Chinese, Russian
Configured ForDSLRs, action photo cameras, mirrorless cameras, Smartphones
APP for SmartphoneFeiyu ON
APP for CameraFeiyu SCORP
CertificationCE

*Experimental conditions for battery life: Payload about 1000g, balanced, in Pan Follow mode on standby.

11. Accessories

All included accessories for FeiyuTech SCORP Mini 2

Image showing the FeiyuTech SCORP Mini 2 gimbal and all its included accessories.

Included Accessories List
No.ItemQuantityNo.ItemQuantity
1USB-C Charging Cablex112Sliderx1
2USB-C to Lightning Cablex113Quick release platex1
3USB-C to Micro Camera Control Cablex114Lens holderx1
4USB-C to USB-C Camera Control Cablex115Focus motor support rodx1
5USB-C to TRS2.5 Camera Control Cablex116Smartphone holderx1
6USB-C to Multi Camera Control Cablex117Long thumb screwx1
7USB-C to 2.5mm Camera Control Cable (DC2.5mm)x118GoPro adapterx1
8USB-C to TRS3.5 Camera Control Cablex119Lens holder screwx1
9USB-C to Mini Camera Control Cablex120Camera fixed screwx1
10Tripodx121Fixed screw for support rodx1
11Fixed platex1

12. User Tips

  • Initial Setup: Even for beginners, the gimbal is intuitive. Dedicate about half an hour to learn balancing and basic operation.
  • Compatibility: The gimbal is compatible with a wide range of cameras including Sony ZV-E10, Canon Rebel SL3, and various mirrorless cameras, action cameras, and smartphones. Always check the official website for the latest compatibility list for specific camera models and lens combinations.
  • Smartphone Use: The FeiyuTech SCORP Mini 2 includes a smartphone holder, allowing you to use your phone for filming. It supports both horizontal and vertical shooting.
  • Vertical Shooting: For mirrorless cameras, vertical recording is supported. After installation, re-balance the camera and perform calibration.
  • Firmware Updates: If you encounter issues with firmware updates, ensure your Wi-Fi is 2.4 GHz, the SSID contains only English letters, and the password is correct without spaces. Restarting the stabilizer can also help.
  • Quality: Users consistently praise the solid construction and quality of components, from the gimbal itself to the accessories and even the storage case.

13. Warranty and Support

For technical support, warranty claims, or any product-related inquiries, please contact FeiyuTech directly:

This document is subject to change without notice. For the most up-to-date information, please refer to the official FeiyuTech website.

Tutorial Videos

For visual guides on setup and operation, you can watch tutorial videos on the official FeiyuTech website or scan the QR code below:

https://www.feiyu-tech.com/play/

QR code for FeiyuTech tutorial videos

Scan this QR code to access tutorial videos.

Official Product Video

Official product video showcasing the features and usage of the FeiyuTech SCORP Mini 2 gimbal.

User Manual (PDF)

A detailed user manual in PDF format is available for download. This document provides comprehensive instructions and diagrams for the FeiyuTech SCORP Mini 2.

Download the PDF manual here: User Manual (PDF)

14. Regulatory Compliance

IC Radiation Exposure Statement

This equipment complies with the limits of exposure to IC radiation defined for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux rayonnements de la IC établies pour unenvironnement non contrôé.

FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Note on Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.