1. Product Overview
The FeiyuTech SCORP 2 is a 3-axis camera handheld stabilizer designed for mirrorless and DSLR cameras, featuring a built-in AI tracker, upgraded joystick, and touch screen for enhanced control and functionality.

Product Components
The following diagram illustrates the main components of the FeiyuTech SCORP 2 gimbal:

- Power button
- Touch screen
- Shutter button
- Mode button
- Joystick
- F1 button
- Kickstand
- Handle
- FPV button
- Knob function switching button
- Multifunction knob
- Anti-drop lock for slider
- Slider
- Quick release plate lock
- Slider lock
- Vertical arm
- Anti-drop lock
- Quick release plate
- Camera backing base
- Fixed plate
- Slide arm
- Slide arm lock
- Image transmission port
- Extension port 1
- Cross arm lock knob
- Cross arm
- Roll axis
- Roll lock
- F2 button
- Tilt lock
- Tilt axis
- Camera for tracking module
- Indicator light for tracking module
- Lens holder
- Lens holder screw
- Extension port 2
- Camera control port/USB-C power output port
- Vertical arm lock knob
- Pan axis
- Pan lock
- A/B button
- Trigger button
- 1/4 inch thread hole
Note: The camera is not included. The USB-C power output port supports charging for compatible shooting devices.
2. Setup
2.1 Charging
Please fully charge the battery before powering on the gimbal for the first time. Use a USB-C cable for charging. The gimbal supports quick charge with a charging power of up to 18W.

2.2 Adjusting the Gimbal to Balancing Position
The gimbal is folded by default. To prepare for use, unlock all three axes and adjust the gimbal to its balancing position. Once adjusted, lock the three axes.

2.3 Using the Support Stand
You can unfold the built-in kickstand or install a tripod to place the gimbal on a flat surface.

2.4 Mounting the Camera
Before mounting the camera, ensure it is ready for shooting (lens installed, lens cover removed, memory card and fully charged battery inserted). The gimbal should be in its balancing position and powered off or in sleep mode.
2.4.1 Attach the Quick Release Plate and Camera Backing Base (Optional)
Attach the quick release plate to your camera by tightening the screw. If using a long or heavy lens, you may attach the camera backing base to the camera, then secure it to the quick release plate with two screws.

2.4.2 Install Lens Holder (Optional)
If needed, install the lens holder on the quick release plate. Ensure the rubber part of the lens holder is directly under the lens. This is recommended for long or heavy lenses.

2.4.3 Mount Camera on Gimbal
Unlock the gimbal, slide the camera into the slot, then lock it. Loosen the adjustment, slide the camera forward or backward until it is roughly balanced, then tighten the adjustment.
2.5 Gimbal Balancing
Balance the gimbal before shooting. Ensure the camera and lens are ready, and the gimbal is powered off or in sleep mode. It is recommended to hold the camera first, then adjust the slide arm, cross arm, and vertical arm.
2.5.1 Balancing the Tilt Axis
Balancing the Vertical Tilt:
- Unlock the tilt lock and loosen the slide arm lock.
- Rotate the tilt axis so the camera lens points upward. Observe the direction the lens tilts.
- If the lens tilts to one side, move the slide arm in the opposite direction until the camera points steadily upward.
- Tighten the slide arm lock while holding the camera.

Adjusting Depth for the Tilt Axis:
- Rotate the tilt axis so the camera lens points forward. Observe the direction the lens tilts.
- If the lens tilts to one side, unlock the quick release plate lock and move the quick release plate in the opposite direction until the camera points steadily forward.
- Lock the quick release plate lock while holding the camera.
The tilt axis is balanced when the camera remains steady when tilted up or down by 45 degrees.
2.5.2 Balancing the Roll Axis
- Unlock the roll lock and observe the direction the camera tilts.
- If the camera tilts to one side, loosen the cross arm lock knob and move the cross arm in the opposite direction until the camera remains still and horizontal to the ground.
- Tighten the cross arm lock knob.
The roll axis is balanced when the camera remains still and horizontal to the ground.

2.5.3 Balancing the Pan Axis
- Unlock the pan lock. Hold the tripod and tilt the gimbal forward until it is horizontal to the ground.
- If the camera tilts to one side, loosen the vertical arm lock knob and move the vertical arm in the opposite direction until the camera remains still and horizontal to the ground.
- Tighten the vertical arm lock knob.
The pan axis is balanced when the camera remains still and horizontal to the ground.

2.5.4 Using the Memory Slider
The Feiyu SCORP 2 includes a memory slider to simplify re-balancing. After balancing the gimbal, move the memory slider to the hole in the axis so the red dot is exposed. This marks the current position. If you use the same camera and lens setup again, you can quickly re-balance by moving the axis to align with the red dot.
3. Operating Instructions
3.1 Power ON/OFF & Wake Up
Important: Before powering on, ensure the gimbal is balanced and all three axes are unlocked. If axes are locked, the gimbal will enter sleep mode for protection. Single tap the power button to wake it up after unlocking all axes.
First Use/New Camera/Lens: Set motor power after powering on for the first time or after changing a camera/lens (refer to section 3.4.1).
Power ON/OFF: Long press the power button until you hear a beep sound, then release.
3.2 Lock/Unlock Screen
Lock Screen: Single tap the F2 button.
Unlock Screen: Single tap the F2 button again.
3.3 Sleep/Wake Up
Sleep Mode: Double tap the power button.
Wake Up: Single tap the power button or tap the sleep icon on the screen.
3.4 Follow Modes Introduction
The gimbal offers various follow modes:
- PF (Pan Follow - Default): Only the pan axis follows the user's hand movement.
- PTF (Pan and Tilt Follow): Both pan and tilt axes follow the user's hand movement, but the roll axis does not.
- FPV (First Person View): All three axes (pan, tilt, and roll) follow the user's hand movement.
- Lock: All three axes remain fixed, and the gimbal maintains a fixed camera direction, regardless of user hand movement.
- FFW (Flash Follow): All three axes follow the user's hand movement at a high follow speed.
3.5 Other Functions
- Auto Rotation: Camera automatically rotates based on set speed and direction for cinematic effects (e.g., Inception-style shots).
- Portrait Mode: Enter portrait mode for vertical video recording or live streaming.
- Selfie Mode: Camera turns 180° horizontally to face the user for selfies.
- Track Video: Records video along pre-set waypoints.
- Manual Lock: Manually move the camera to a desired position and hold for half a second to save new tilt/pan positions.
3.6 App Connecting (Feiyu SCORP App)
The Feiyu SCORP App unlocks additional professional settings and controls.
- Turn on the gimbal.
- Enable Bluetooth on your smartphone.
- Run the Feiyu SCORP App and tap the top of the home page to connect the gimbal.
Once connected, you can control the gimbal via a virtual joystick, switch modes, adjust motor power/camera parameters/follow speed, and update firmware.

Download the App by scanning the QR codes below or searching for "Feiyu SCORP" in your app store. Requires iOS 11.0+ or Android 6.0+.


3.7 Button Operation
- Power Button: Long press for ON/OFF. Single tap for wake up (from sleep) or battery level display (when off). Double tap to enter sleep mode.
- Mode Button (M): Single tap to cycle through PF/PTF/FPV modes. Tap five times for Horizon calibration.
- Trigger Button: Double tap for Recenter. Triple tap for Enter/Exit selfie mode (pan axis turns 180°). Press and hold for PTF (release to exit). Customizable via App.
- Joystick: Push to control tilt and pan axes movement.
- Shutter Button: Press halfway for Focus. Single tap (fully) for Start/Stop recording. Long press (fully) for Take photo.
- FPV Button: Single tap to Enter/Exit FPV mode.
- F1 Button: Double tap for Enter/Exit portrait mode. Triple tap for AI power ON/OFF. Long press for Enter/Exit AI Tracking (with AI Power enabled).
- F2 Button (Home Button): Single tap for Lock/Unlock screen (home page) or Return to home page (other pages). Double tap to Enter FFW mode. Long press to Enter motor power auto tuning.
- A/B Button: Long press to Mark current position as A/B. Single tap to Return to marked A/B position. Used for marking axes/focus positions.
- Knob Function Switching Button: Single tap to switch control object (Tilt/Pan/Roll) or switch between electronic focus/zoom. Long press to cycle through control options (3 axes movement/Electronic focus/Focus motor).
- Multifunction Knob: Turn to control roll, tilt, and pan axes movement; control focus/zoom; control focus motor; or adjust parameters on the touch screen.
- Key Combinations: Long press F1 + F2 buttons to Clear Bluetooth.
3.8 Touch Screen Operation
The 1.3-inch touch screen provides intuitive control over various gimbal functions.

- Current Battery Level: Displays the gimbal's battery level.
- Camera Connection: Icon appears when camera is successfully connected.
- Bluetooth Connection: Icon appears when Bluetooth is connected.
- Motor Power: Auto tune or manually adjust motor power for each axis.
- Follow Speed: Select preset profiles (Slow/Med/Fast) or customize speed and dead zone.
- Follow Mode: Select PF, PTF, FPV, Lock, or FFW.
- Scenario: Access various shooting scenarios like Timelapse, Auto Rotation, Panorama, Portrait Mode, Selfie Mode, and Track Video.
Swipe Gestures:
- Swipe from Right to Left: Access Joystick settings, Gimbal settings (disable selfie, manual lock, horizon calibration), A/B settings (auto focus time, attitude change time), and More (silent switch, language, default settings, firmware info).
- Swipe from Left to Right: Access Camera settings (aperture, ISO, shutter speed, resolution, FPS).
- Swipe Up: Access Knob settings (control object, damp, speed, smooth, sound).
- Return to Previous Menu: Swipe right.
3.9 AI Tracking
The SCORP 2 features a built-in AI tracking module for intelligent shooting without additional accessories.
Activating AI Tracking: Triple tap the F1 button or navigate to "More Settings" on the home page and toggle the "AI Power" switch ON.
Once AI power is on, the tracking module indicator light will be solid red. When AI tracking is active, the indicator light will be green.

AI Gesture Control:
- OK Gesture (Left or Right Hand): Start/Stop tracking. Green light indicates tracking. Red light indicates standby. Gestures must be separated by 3 seconds.
- Thumbs Opposite Direction: Stop tracking. Enters standby mode with red light.
- Spread Palm (Left or Right Hand): Shutter. Takes photo or starts recording after a 3-second countdown. Repeat gesture to stop recording.
- Double L-Shaped Gestures: Custom Framing. Green light blinks fast to indicate framing. Perform again to complete framing when the subject is in the desired position.
AI Tracking Button Control:
- Long press F1 button: Start/Stop tracking.
- Triple tap F1 button: AI power ON/OFF.
3.10 Control Ports
The fixed plate includes a camera control port, an image transmission port, and two extension ports for connecting focus motors and other accessories.

- Camera control port
- Image transmission port
- Extension port 1/Focus motor port 1
- Extension port 2/Focus motor port 2
Connect your camera with the appropriate shutter cable to enable camera control.
4. Maintenance
4.1 Storage and Care
- Keep the product out of reach of children and pets.
- Do not leave the product near heat sources (furnace, heater) or inside a vehicle on hot days.
- Store the product in a dry environment.
- Do not overcharge or overuse the battery, as this can damage the battery core. If the product is not used for a long time, charge it at least once per month.
- Never use the product when the temperature is too high or too low.
5. Troubleshooting
5.1 Motor Power Adjustment
If the gimbal is vibrating at a high frequency, the motor power may be too strong. If the gimbal is shaking with low frequency and large amplitude, the motor power may be too weak. Adjust motor power settings via the touch screen or app to optimize performance.
5.2 General Notices
- Ensure motor spinning is not blocked by external force when the product is powered on.
- Unless marked as waterproof or splash-proof, do not allow the product to contact water or other liquids. Avoid sea water or corrosive liquids.
- Do not disassemble the product except for marked detachable parts. Accidental disassembly may cause abnormal function and will require repair by FeiyuTech after-sales or an authorized service center, with costs borne by the user.
- Prolonged continuous operation may cause the product surface temperature to rise; operate carefully.
- Do not drop or strike the product. If the product is abnormal, contact Feiyu After-sales support.
6. Specifications
| Feature | Specification |
|---|---|
| Product Name | Feiyu SCORP 2 3-Axis Camera Handheld Stabilizer |
| Product Model | Feiyu F2-2 |
| Rotatable Range (Tilt) | +200° ~ -120° |
| Rotatable Range (Roll) | +245° ~ -75° |
| Rotatable Range (Pan) | 360° |
| Controllable Range (Tilt) | +180° ~ -51° |
| Controllable Range (Roll) | +36° ~ -36° |
| Controllable Range (Pan) | 360° |
| Size (Main body, folded) | 257*71*260mm |
| Weight (Main body) | About 1070g |
| Payload Capability | About 2500g (Well-balanced) |
| Battery Life | 13 Hours |
| Battery Capacity | 2500mAh |
| Operating Voltage | 6.8V-8.4V |
| APP Supported Languages | French, Spanish, Korean, Portuguese, English, Russian |
| AI Tracking | Built-in AI Tracking module |
| Certification | CE |
For a detailed list of compatible cameras and lenses, please download the full manual from the official FeiyuTech website.
7. User Tips
- The FeiyuTech SCORP 2 is noted for its robust build and smooth operation, making it suitable for professional-quality photography.
- Always ensure your camera is compatible with the gimbal. Check the official FeiyuTech website for the latest compatibility list.
- Take advantage of the quick release design for instant vertical filming setup.
- Utilize the 1.3-inch touchscreen and integrated handle for intuitive control and comfortable use.
- Explore the various follow modes and AI tracking features to enhance your creative shots.
8. Support & Regulatory Information
8.1 Contact Information
Manufactured by: Guilin Feiyu Technology Incorporated Company
Website: www.feiyu-tech.com
E-mail: support@feiyu-tech.com
Tel: +86 773-2320865
For tutorial videos, visit: https://www.feiyu-tech.com/play/
Official product video showcasing the FeiyuTech SCORP 2 gimbal's features and operation.
8.2 Regulatory Conformance (FCC & IC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or TV reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.