BEAST KINGDOM AH-906

Contents

User Manual: Cartoon Spiderman Bluetooth Headphones (Model AH-906)

This manual provides instructions for the safe and efficient use of your BEAST KINGDOM Bluetooth Headphones. Please read thoroughly before use and retain for future reference.

Important Safety Information

  • Do not expose the headphones to extreme temperatures or humidity.
  • Do not disassemble, repair, or modify the device.
  • Avoid prolonged listening at high volumes to prevent hearing damage.
  • Keep the headphones away from water. This product is not waterproof.
  • Dispose of the battery and device according to local regulations.

Package Contents

  • 1 x Bluetooth Headset
  • 1 x User Manual
  • 1 x Charger (USB cable)
  • (An AUX cable may be included depending on the specific model variant.)

Spiderman themed Bluetooth headphones Image: Spiderman themed Bluetooth headphones, a common design for this product line.

Product Overview

The AH-906 Bluetooth Headset offers wireless audio streaming and hands-free calling. It features a built-in microphone and supports various Bluetooth profiles for versatile use.

Four different Marvel superhero themed headphones: Iron Man, Spiderman, Captain America, and Avengers Image: A collection of Marvel superhero themed headphones, showcasing various designs available in this product series.

Controls and Indicators

Diagram of headphone controls showing volume up/down, power/multifunction button, and data jack Image: Diagram illustrating the controls and data jack on the headphone. The buttons include Volume Up/Down, Power/Multifunction, and a Time-out/Answering Key.

  • Power/Multifunction Button (II): Used for power on/off, play/pause music, answer/end calls, and redialing the last number.
  • Volume Up (+): Press to increase the volume. Press and hold for the next song.
  • Volume Down (-): Press to decrease the volume. Press and hold for the previous song.
  • Data Jack: Used for charging the headset and for Line-In audio connection.

Setup

Initial Charging

  1. Connect the provided USB charging cable to the headset's data jack and to a compatible USB power source (e.g., computer USB port, USB wall adapter).
  2. A red indicator light will illuminate, signifying that the headset is charging.
  3. The indicator light will turn blue once the headset is fully charged.
  4. It is recommended to fully charge the headset before its first use. Charging typically takes about 2 hours.

Bluetooth Pairing

  1. Power On: Press and hold the Power/Multifunction button (II) for approximately 2 seconds. The blue light will sparkle, and you will hear a "Power On" voice prompt.
  2. Pairing Mode: After powering on, the red and blue indicator lights will begin to flash alternately. This indicates the headset is in pairing mode, ready to connect.
  3. Activate Bluetooth on Device: On your mobile device (smartphone, tablet, etc.), navigate to the Bluetooth settings and ensure Bluetooth is enabled.
  4. Search for Device: Scan for available Bluetooth devices. The headset should appear in the list as "AH-906" or a similar identifier.
  5. Connect: Select "AH-906" from the list of found devices. Upon successful connection, you will hear a "Connected" voice prompt.
  6. Automatic Power Off: If the headset remains connected but no operations are performed for 5 minutes, it will automatically power off to conserve battery.

Operation

Power On/Off

  • Power On: Press and hold the Power/Multifunction button (II) for 2 seconds until the blue light sparkles and you hear "Power On".
  • Power Off: Press and hold the Power/Multifunction button (II) for 3 seconds until the indicator light goes out.

Call Management

  • Answer Call: Press the Power/Multifunction button (II) once when an incoming call rings.
  • Hang Up Call: Press the Power/Multifunction button (II) once after finishing a call.
  • Reject Call: Press and hold the Power/Multifunction button (II) for 2 seconds during an incoming call.
  • Redial Last Number: Quickly double-click the Power/Multifunction button (II) to redial the last dialed number.

Volume Control

  • Increase Volume: Press the Volume Up (+) button.
  • Decrease Volume: Press the Volume Down (-) button.
  • The headset has 15 volume levels. You will hear a "DU" sound when the volume reaches its maximum or minimum setting.
  • Note: For your hearing safety, prolonged listening at maximum volume is not recommended.

Music Playback

  • Play/Pause: Press the Power/Multifunction button (II) once to play or pause music.
  • Previous Song: Press and hold the Volume Down (-) button for 2 seconds.
  • Next Song: Press and hold the Volume Up (+) button for 2 seconds.

Line-In Mode

To use the headset with a non-Bluetooth audio device or when the battery is depleted:

  1. Plug one end of a 3.5mm AUX cable (if available) into the headset's data jack.
  2. Plug the other end of the AUX cable into your audio device's headphone jack.
  3. The headset will function as a normal wired earphone, even if powered off.

Language Switching

While the headset is in pairing mode (red and blue lights flashing), simultaneously short press the "Previous Song" (<<) and "Next Song" (>>) buttons to switch between English and Chinese voice prompts.

Maintenance

  • Cleaning: Wipe the headset with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the finish or internal components.
  • Storage: Store the headset in a cool, dry place away from direct sunlight, extreme temperatures, and excessive dust.
  • Battery Care: To prolong the life of the built-in polymer battery, avoid fully discharging it frequently. Charge the headset regularly, even if not in active use, to maintain battery health.

Troubleshooting

Problem Possible Cause Solution
Headset does not power on Low battery Charge the headset fully using the provided USB cable.
Cannot pair with device Headset not in pairing mode; Bluetooth off on device; Device too far; Interference Ensure headset is flashing red/blue. Turn on device Bluetooth. Move device closer (within 10m). Turn off other Bluetooth devices.
No sound or low volume Volume too low on headset or device; Headset not connected properly Increase volume on both the headset and your connected device. Re-pair the headset if necessary.
Headset powers off unexpectedly Low battery; No activity for 5 minutes after connection Charge the headset. Ensure continuous audio playback or interaction to prevent automatic shutdown.
Cannot switch language Not in pairing mode Ensure the headset is in pairing mode (red and blue lights flashing) before attempting to switch languages.

Specifications

Model: AH-906

Feature Specification
Brand Name BEAST KINGDOM
Bluetooth Version V6.2 (for AH-906); V5.0 (for M-series models)
Support Profiles HFP, HSP, AVRCP, A2DP
Effective Wireless Range 10 meters (open space)
Music Playback Time 18 Hours (for AH-906); approx. 10 Hours (for M-series models)
Call Time 24 Hours (for AH-906); approx. 10 Hours (for M-series models)
Standby Time 300 Hours (for AH-906); approx. 100 Hours (for M-series models)
Charging Time 2 Hours
Battery Type Polymer (for AH-906); 450mAh (for M-series models)
Vocalism Principle Balanced Armature
Communication Wireless + Wired
Style Over-ear/On-ear headphones, convertible to wired
Material PVC, Plastic
Waterproof No
Active Noise-Cancellation Yes
Sound Isolating Yes
With Microphone Yes
Voice Assistant Built-in Yes
NFC Technology Yes
Support APP Yes
Support Memory Card Yes
Certification CE
Origin Mainland China
Package Length 30 cm
Package Width 24 cm
Package Height 13 cm
Package Weight 0.348 kg

Note on M-series Models

Other models in this product line (e.g., M1000, M2000, M3000, M4000, as seen on packaging) may have slightly different specifications. These can include Bluetooth Version 5.0, music/call time of approximately 10 hours, and standby time of approximately 100 hours, with a 450mAh battery capacity. Always refer to the specific model's documentation for precise details.

Back of Captain America headphone packaging showing product parameters Image: Back of the Captain America themed headphone packaging (Model M4000) displaying product parameters including battery capacity, music time, standby time, frequency range, impedance, sensitivity, speaker size, transmission distance, and Bluetooth version 5.0.

User Tips

  • Battery Life: For an optimal experience, ensure the headphones are fully charged. The AH-906 model offers a substantial 18 hours of music playback, making it suitable for extended use.
  • Volume Control: Always be mindful of the volume levels, especially when children are using the headphones, to prevent potential hearing damage. The headphones provide clear audio cues when reaching maximum or minimum volume.
  • Wired Mode Flexibility: If the battery runs out or you prefer a direct connection, utilize the Line-In mode with an AUX cable to continue enjoying your audio without interruption.
  • Voice Prompt Language: If the voice prompts are in an unfamiliar language, remember you can easily switch them between English and Chinese by pressing the previous and next song buttons simultaneously while the headphones are in pairing mode.

Warranty and Support

For detailed warranty information, technical support, or any service-related inquiries, please refer to the official BEAST KINGDOM website or contact your authorized retailer. Keep your purchase receipt as proof of purchase.

A digital version of this user manual is available in PDF format for your convenience: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.