ToolkitRC M6D

Contents

ToolkitRC M6D V3 Dual Channel Smart Charger Discharger

User Manual

1. Introduction

Thank you for purchasing the ToolkitRC M6D multi-function charger. Please read this manual carefully before use to ensure proper operation and longevity of your device.

ToolkitRC M6D V3 Smart Charger with packaging and USB cable

Figure 1: ToolkitRC M6D V3 Smart Charger and accessories

Further Information

To ensure you have the best experience with this product, scan the QR code below to stay up to date with news, information, and firmware updates for your charger. You can also visit www.toolkitrc.com.

WeChat QR Code for ToolkitRC M6D V3

Figure 2: WeChat QR Code for Applications, Video Teaching, and Product Purchase

2. Safety Instructions

  • The M6D allows an input voltage of 7-28V. Please ensure that the power supply voltage is within this range. Pay attention to the positive and negative polarities of the power supply when connecting.
  • Do not use this product in a hot area or near a heat source. Do not use this product in a damp, flammable, or explosive gas environment.
  • Only use this product while under direct supervision. Do not leave charging batteries unattended.
  • When not using this product, please unplug the input power in time.
  • When using the charging function, please set the current matching with the battery. Do not set excessive current charging, so as not to damage the battery.

3. M6D Layout

Front View

M6D Layout Front View with labels for Display, Scroll Wheel, Exit Key, CH Key, Main Port, Temp. Sensor Port, Balance Port

Figure 3: M6D Front Layout

  • Display: Shows charging information and menu options.
  • Scroll Wheel: Turn left or right to navigate, press for OK.
  • Exit Key: Used to exit menus or cancel operations.
  • CH Key: Channel selection key.
  • Main Port: Primary battery connection port.
  • Temp. Sensor Port: For connecting an external temperature sensor.
  • Balance Port: For connecting battery balance leads.

Back View

M6D Layout Back View with labels for Input Port, USB Output & Upgrade, Cooling Fan

Figure 4: M6D Back Layout

  • Input Port (DC 7-28V): Connects to the external power supply.
  • USB Output & Upgrade (5.0V 2.1A): For charging mobile devices and firmware upgrades.
  • Cooling Fan: Dissipates heat during operation.

4. Quick Start Guide

  1. Connect a 7-28V DC power supply or an input battery to the input port on the back of the M6D.
  2. The display will show the boot logo for 2 seconds, accompanied by a boot sound.
  3. After booting, the display will enter the main interface, showing real-time charging data.
M6D display showing main interface with voltage, current, and battery cell information

Figure 5: M6D Main Interface

  • Short press the [Exit] button to switch the cursor between the left and right channels.
  • Press and hold [Exit] to start testing the internal resistance of the corresponding channel. After the test, the internal resistance will be displayed.
  • Scroll the [Scroll Wheel] to switch between different pages of information in the corresponding channel.
  • Short press [OK] to select the charging task when the channel is idle, or to adjust and end the work when the channel is active.
  • Press and hold [OK] to enter the system setting interface when both channels are idle.
  • Press [Exit] to end modifications or return to the previous interface.

Key Functions Summary

  • Short press [Scroll Wheel] once to confirm a key function.
  • Press and hold [Scroll Wheel] for 2 seconds to delete a key function.
  • Successful key operations will be accompanied by a
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.