1. Introduction
Thank you for purchasing the Baofeng UV-21 Pro V2. This dual-band, dual-display, and dual-watch radio is designed to provide secure, instant, and reliable communications with peak efficiency. This manual will guide you through the proper use and maintenance of your radio to ensure maximum performance and longevity.
1.1 Main Features
- Frequency Range: 136-174MHz (TX&RX), 220-260MHz (TX&RX), 400-520MHz (TX&RX), FM65-108MHZ (RX), AM108-136MHz (RX), Police350-390MHz (RX)
- Wireless Copy Frequency: One-touch search frequency for easy pairing and grouping.
- Display: 1.77" TFT large color screen for clear operation, even in the dark.
- Channels: Up to 999 memory channels.
- Charging: Type-C USB charger for convenient charging, supporting two charging methods (base charger and USB direct charging).
- Power Output: 5W-10W selectable high or low power.
- Functions: FM Radio, CTCSS/DCS, VOX (voice activated transmit), Emergency Alert, NOAA weather reception, LED flashlight, Stopwatch, Scrambler, DTMF encoder.
- Accessory Port: Two (2) pins for Kenwood accessory port.
- Water Resistance: Not waterproof / water-resistant (as per specifications, despite some marketing claims).

Figure 1: Baofeng UV-21 Pro V2 with key features.

Figure 2: Overview of radio functions including Tri-Band, FM Radio, CTCSS/DCS, VOX, 999 Channels, Emergency Alert, Wireless Copy Frequency, NOAA Function, 1.77" Large Screen, and Type-C Charging.
1.2 Package Contents
Ensure your package contains the following items. If any item is missing, please contact your dealer.
- 1 Radio Unit
- 1 Li-Ion Battery Pack
- 1 Fast Desktop Charger
- 1 Antenna
- 1 Belt Clip
- 1 Type-C Cable
- 1 User Manual (PDF version available at PDF User Manual)

Figure 3: Included accessories: Machine, Antenna, Battery, Charger, Clip, Lanyard, TYPE-C cable, and Manual.
2. Safety Warnings and Regulations
2.1 General Precautions
- Licensing: Operation of this unit in Transmit mode requires a valid Amateur Radio License in many regions (e.g., EU, US, Canada). Failure to comply may be unlawful and liable for prosecution. Refer to local regulations for specific requirements.
- Programming: When programming the radio, always read the factory software data first, then rewrite with your desired frequencies. Use a programming cable with a PC. Ensure your programming complies with local licensing certifications (FCC, EU, etc.).
- RF Energy Exposure: Before use, read the RF Energy Exposure and Product Safety Guide that ships with the radio for safe usage and compliance with applicable standards.
- Damaged Antenna: Do not use the radio with a damaged antenna. Contact your local dealer for a replacement.
- Hand-Held Operation: For hand-held operation, hold the radio at least 1 inch (2.5 cm) from your face to comply with RF exposure requirements.
- Body-Worn Operation: Use only supplied or approved belt-clip accessories for body-worn operation. Third-party accessories may not comply with RF exposure guidelines.
2.2 Operating Prohibitions
- Do not operate in locations with fuels, chemicals, explosive atmospheres, or other flammable/explosive materials.
- Do not operate near blasting areas.
- Do not operate near medical or electronic equipment vulnerable to RF signals.
- Do not hold the product while driving.
- Do not operate where wireless communication equipment is prohibited.
- Do not disassemble, modify, or repair the product without authorization.
2.3 Battery Precautions
- Do not charge or replace the battery in locations with fuels, chemicals, or explosive materials.
- Do not charge a wet battery; dry it first.
- Do not charge a deformed, leaking, or overheated battery.
- Use only authorized chargers.
- Avoid overcharging, as it shortens battery life.
- Do not short-circuit battery terminals or throw batteries into fire.
- Do not remove the battery casing.
- Charge the battery between 5°C and 40°C (40°F and 105°F).
- Turn off the radio before charging.
- Do not interrupt the charging cycle until the green light is on.
- Do not expose the battery to direct sunlight or heat sources.
- Do not squeeze or penetrate the battery.
- Damaged batteries must not be transported.
- For transportation, separate batteries from metal parts and ensure the radio is switched off if the battery is attached.
3. Setup and Installation
3.1 Charging the Battery Pack
The Li-ion battery pack is not charged at the factory and must be charged before first use. For optimal performance, fully charge and discharge the battery two or three times.
- Plug the AC adapter into an AC outlet.
- Connect the AC adapter cable to the DC jack on the back of the charger base. The indicator light will blink orange.
- Insert the battery or the radio (with battery) into the charger base. Ensure good contact with charging terminals. The indicator light will turn red, indicating charging has begun.
- A full charge takes approximately 2-5 hours. The indicator light will turn green when charging is complete.
- If charging the radio with the battery attached, ensure the radio is OFF for proper charge indication. If the radio is ON, it consumes energy, and the charger may not accurately detect full charge.
Type-C USB Charging
The radio also supports direct charging via a Type-C USB cable.
- Ensure your radio is turned OFF.
- Plug the Type-C USB cable into the Type-C USB charging port on your battery.
- Connect the other end of the USB cable to a wall power outlet, power bank, or car charger.
- The battery meter on the LCD will show charging progress.
- An empty battery will be fully charged in approximately 4 hours.
- For optimal battery life, remove the radio from the charger within 6 hours.

Figure 4: Two charging methods: Base Charger and USB Type-C direct charging.
LED Indicator Status
| Status | LED Indication |
|---|---|
| No Battery | Green and red alternately flashing |
| Charge Normally | Red |
| Fully Charged | Green |
| Trouble | Red blinks fast for a long time |
Note: Trouble indicates battery too warm, battery short-circuited, or charger short-circuited.
3.2 Installing Accessories
Antenna Installation/Removal
- Installation: Screw the antenna clockwise into the connector on top of the transceiver until secure.
- Removal: Turn the antenna counter-clockwise to remove it.
Belt Clip Installation/Removal
- Installation: Remove the two parallel screws above the battery on the back of the radio. Thread them through the holes on the belt clip and screw them back into the radio body.
- Removal: Unscrew the belt clip counter-clockwise.
Battery Pack Installation/Removal
Before attaching or removing the battery, ensure your radio is turned off by rotating the power/volume knob fully counter-clockwise.
- Installation: Align the battery parallel with the radio body, with the lower edge of the battery about 1-2cm below the radio's edge. Slide the battery upward along the guide-rails until it clicks into place.
- Removal: Press the battery release button located above the battery pack, then slide the battery downward.
Optional Speaker/Microphone Installation
Pry open the rubber MIC-Headset jack cover and insert the Speaker/Microphone plug into the double jack.
4. Radio Overview
4.1 Buttons and Controls

Figure 5: The 1.77-inch color LCD screen provides a better user experience.
| No. | Component | Description |
|---|---|---|
| 1 | Antenna | Transmits and receives radio signals. |
| 2 | PTT Key | Push-to-Talk button for transmitting. |
| 3 | SK1-FM broadcast/Monitor key | Momentary press for FM radio, press and hold to monitor signal. |
| 4 | SK2-Flashlight/One touch search | Momentary press for LED flashlight, press and hold for one-touch frequency search. |
| 5 | SK3-Power selectable/Emergency key | Momentary press to select high/low power, press and hold for emergency alarm. |
| 6 | LED Flashlight | Provides illumination. |
| 7 | LED Tx/Rx indicator | Red for transmitting, Green for receiving. |
| 8 | Color LCD | Displays frequency, channel, and status. |
| 9 | MENU key | Activates menu, selects items, confirms parameters. |
| 10 | EXIT Key | Exits menu and functions. |
| 11 | A/B key | Selects main/secondary display frequency (VHF or UHF). |
| 12 | VFO/MR key | Switches between Frequency (VFO) mode and Channel (MR) mode. |
| 13 | Numeric keypad | Inputs frequencies, channel numbers, and DTMF codes. |
| 14 | Speaker | Outputs audio. |
| 15 | Power / Volume knob | Turns radio on/off and adjusts volume. |
| 16 | Speaker/Mic Jacks | Connects external speaker/microphone. |
| 17 | ▲/▼ Navigation keys | Navigates menus, channels, and frequencies. |
| 18 | Type-C charging port | Connects Type-C USB cable for direct charging. |
| 19 | Type-C charging indicator | Indicates Type-C charging status. |
| 20 | Battery tightening screw | Secures the battery. |
4.2 LCD Display Icons
| Icon | Description |
|---|---|
| RSSI | Squelch Open/Close Indicator |
| H/L | Transmit power level indicator (High/Low) |
| ♪ | DTMF side tone from radio speaker (DT-ST, ANI-ST, DT+ANI) |
| D | DCS enabled |
| C | CTCSS enabled |
| + | TX shifted higher in VFO/Frequency Mode |
| - | TX shifted lower in VFO/Frequency Mode |
| D | Dual watch enabled |
| 🔒 | Keypad lock enabled |
| 🗣️ | VOX enabled |
| 📞 | Confidential calling feature activated |
| N | Narrowband enabled |
| 🔋 | Battery level indicator |
| R | Reverse function enabled |
| ▶ | Indicates active band or channel |
| SCR | Voice scramble function activated |
4.3 Status Indications
The status LED provides simple indications:
- Constant Red: Transmitting
- Constant Green: Receiving
When the battery level indicator shows an empty battery, the radio will beep periodically, flash the backlight, and announce "Low Voltage" if voice prompts are enabled. This indicates the need for charging.
5. Basic Operations
5.1 Power On/Off and Volume Adjustment
- Power On: Rotate the Volume/Power knob clockwise until you hear a "click". The radio will emit a double beep, display a message or flash the LCD, then show a frequency or channel. If voice prompt is enabled, it will announce "frequency mode" or "channel mode".
- Power Off: Rotate the Volume/Power knob counter-clockwise until you hear a "click".
- Volume Adjustment: Rotate the Volume/Power knob clockwise to increase volume, counter-clockwise to decrease. Use the monitor function (press and hold SK1) to adjust volume to the un-squelched static.
5.2 Frequency (VFO) Mode and Channel (MR) Mode
The radio operates in two main modes:
- Frequency (VFO) Mode: Used for temporary frequency assignments, testing, or quick field programming.
- Channel (MR) Mode: Used for selecting preprogrammed channels.
Press the [VFO/MR] key to switch between these modes. In MR mode, the channel number is displayed. In VFO mode, 'VFO' is displayed.
5.3 Making a Call
- Channel Mode Call: Select a channel, then press and hold the [PTT] key to transmit. Speak into the microphone with a normal tone. The red LED will illuminate.
- Frequency Mode Call: Switch to VFO mode using [VFO/MR], input the desired frequency using the numeric keypad, then press and hold the [PTT] key to transmit. The red LED will illuminate.
- Receiving a Call: When you release the [PTT] key, you can receive. The green LED will illuminate when receiving a call.
Note: For best reception, keep the microphone 2.5 cm to 5 cm from your mouth during transmission.
5.4 Wireless Copy Frequency
This feature allows you to quickly copy frequencies from another radio.
- Power on your radio and press the "2" key. The display will show "SEEK".
- Press and hold the [MENU] key on the other walkie-talkie to transmit its frequency.
- Your radio will search for and copy the frequency.
- Switch to channel mode, and the display will show the other person's frequency. You can now communicate.

Figure 6: Steps for using the 2 Seconds Copy Frequency feature.
5.5 Flashlight and Emergency Alert
- Flashlight: Press [SK2] momentarily to turn on the LED flashlight. Press again to flash the LED (strobe mode). Press a third time to turn it off.
- Emergency Alert: Press and hold [SK3] for 3 seconds to activate the emergency alarm (loud siren and flashing flashlight). Press [SK3] again to exit.
5.6 FM Radio
The radio can receive FM broadcasts in the 65-108MHz range.
- In frequency or channel mode, press [SK1] to turn on the radio.
- Use the ▲/▼ keys or numeric keypad to select the desired frequency. Press #z to automatically search for stations.
- Press [SK1] again to exit FM radio.
Note: If a signal is received on the active frequency while listening to FM, the radio will automatically switch to the communication frequency. It will return to FM mode when the signal disappears.
5.7 NOAA Weather Radio
The radio includes a NOAA Weather Radio function to receive weather reports and a NOAA Weather Scan function to scan all 10 NOAA Weather Radio channels.
- Activate Scan: Press and hold the [0sQL] key for 3 seconds. The NOAA icon will appear, and the radio will enter Weather band mode.
- Start Automatic Scan: Press and hold the #z key for 3 seconds to start scanning all 10 channels. The scan will stop on active channels. Press and hold #z again to stop the scan.
- Manual Channel Selection: After stopping the scan, use the ▲/▼ keys to manually select a weather channel.
- Exit: Press the [MENU] key or [PTT] key to exit Weather Radio broadcast mode.
NOAA Weather Channel Frequencies
| Channel Number | RX Frequency MHz | Channel Number | RX Frequency MHz |
|---|---|---|---|
| Wx-01 | 162.550 | Wx-06 | 162.500 |
| Wx-02 | 162.400 | Wx-07 | 162.525 |
| Wx-03 | 162.475 | Wx-08 | 161.650 |
| Wx-04 | 162.425 | Wx-09 | 161.775 |
| Wx-05 | 162.450 | Wx-10 | 163.275 |
Note: These are receive-only channels for NOAA and Canadian weather broadcasts. Transmission on these channels is not possible.
5.8 Menu System Navigation
The radio's menu system allows customization of various features. You can navigate using arrow keys or numerical shortcuts.
Basic Menu Use (Arrow Keys)
- Press the [MENU] key to enter the menu.
- Use the ▲/▼ keys to navigate between menu items.
- Press [MENU] again to select a desired menu item.
- Use the ▲/▼ keys to select the desired parameter.
- Press [MENU] to confirm your selection and save.
- Press [EXIT] to cancel changes or exit the menu.
Menu Shortcuts (Numerical Keypad)
- Press the [MENU] key to enter the menu.
- Use the numeric keypad to enter the number of the menu item.
- Press [MENU] to enter the menu item.
- Use the numeric keypad or ▲/▼ keys to select the parameter.
- Press [MENU] to confirm and save.
5.9 Scanning
The radio features a built-in scanner for VHF and UHF bands. In VFO mode, it scans in steps according to your set frequency step. In MR mode, it scans your programmed channels.
- Enable Scanner: Press and hold the #z key for about two seconds.
- Exit Scanner: Press and hold the #z key again.
Scanning Modes
The scanner can be configured for Time (TO), Carrier (CO), or Search (SE) operation:
- Time Operation (TO): Scanner stops on a signal, then resumes after a preset time.
- Carrier Operation (CO): Scanner stops on a signal, then resumes when the signal disappears.
- Search Operation (SE): Scanner stops on a signal and remains stopped until manually resumed.
Setting Scanner Mode
- Press [MENU].
- Enter 21 on the numeric keypad.
- Press [MENU] to select.
- Use ▲/▼ keys to select the desired scanning mode.
- Press [MENU] to confirm and save.
- Press [EXIT] to exit.
5.10 Manual Programming (Channels Memory)
Memory channels allow you to store frequently used frequencies. Each of the 999 memory channels can store receive/transmit frequencies, power settings, signaling information, bandwidth, and a six-character alphanumeric identifier.
Programming a Channel Repeater Offset with CTCSS Tone (Example for Channel 10)
RX = 432.55000 MHz, TX = 437.55000 MHz (+5 Offset), TX CTCSS tone 123.0
- Press [MENU] to switch between menus.
- Press [VFO/MR] to set the radio to VFO mode (VFO icon displayed).
- Enter [3][1] then [1][0] to delete prior data in channel 10.
- Enter [1][2] then 123.0 to select desired TX encode tone.
- Enter RX frequency (e.g., 43255000).
- Enter [3][0] then [1][0] to enter the desired channel.
- Enter TX frequency (e.g., 43755000).
- Enter [3][0] then [1][0] to enter the same channel.
- Press [VFO/MR] to return to MR mode.
5.11 VOX (Voice Operated Transmit)
VOX enables hands-free communication. Speak into the microphone, and the radio will automatically transmit.
- In standby mode, press [MENU] then 7. The screen will display "VOX".
- Press [MENU] to enter.
- Use ▲/▼ keys to turn VOX ON/OFF or select VOX level (1-10). Level 1 is least sensitive, 9 is most sensitive.
- Press [MENU] to confirm.
- Press [EXIT] to return to standby.
Note: VOX is not enabled in Scan or FM Radio mode.
5.12 Dual Watch
Dual Watch allows monitoring two channels simultaneously. The radio will flip-flop between two frequencies at a fixed interval.
- Press [MENU].
- Enter 7 on the numeric keypad.
- Press [MENU] to select.
- Use ▲/▼ keys to enable or disable.
- Press [MENU] to confirm.
- Press [EXIT] to exit.
5.13 Scrambler
The scrambler function protects communications by voice inversion, preventing unauthorized listening. The "SCR" icon appears when enabled.
- In standby mode, press [MENU] then 45. The screen displays "SCRAMBLE".
- Press [MENU] to enter.
- Use ▲/▼ keys to select the scramble mode (MODE1 to MODE3) to activate.
5.14 DTMF (Dual-Tone Multi-Frequency)
DTMF is used for in-band signaling, commonly for automation systems and repeater activation.
| 1209Hz | 1336Hz | 1477Hz | 1633Hz | |
|---|---|---|---|---|
| 697Hz | 1 | 2 | 3 | A |
| 770Hz | 4 | 5 | 6 | B |
| 852Hz | 7 | 8 | 9 | C |
| 941Hz | * | 0 | # | D |
To send DTMF codes, press the corresponding numeric keys (and A, B, C, D keys) while holding down the PTT key.
5.15 Customization Options
The radio allows customization of various visual and audible features:
- Display Backlight (ABR) - Menu 7: Adjust backlight duration (ON/5sec/10sec/15sec/20sec).
- Beep Prompt (BEEP) - Menu 8: Enable/disable key press beep tone.
- Voice Function (VOICE) - Menu 17: Enable/disable voice prompts.
- Language (LANGUAGE) - Menu 18: Select menu language (English/Chinese).
- Working Mode (MDF-A) - Menu 24: Choose display mode (Frequency, Channel, or Channel Name).
- Roger Beep (ROGER) - Menu 36: Enable/disable end-of-transmission tone.
- Power On Message (POWER ON MSG) - Menu 40: Customize welcome message (Voltage, Message, Logo, Model Name).
- Power On Password (POWER ON PWD) - Menu 43: Enable/disable password protection on startup.
6. Maintenance
Your two-way radio is a precision electronic device and should be handled with care.
- Do not attempt to open the radio. Its precision mechanics and electronics require specialized experience and equipment. Unauthorized opening voids the warranty.
- Avoid storing the radio in direct sunlight or hot areas, as high temperatures can shorten the life of electronic components and warp plastics.
- Keep the radio away from dusty and dirty areas.
- Keep the radio dry. Rainwater or dampness can corrode electronic circuits.
- If you notice a peculiar smell or smoke, immediately turn off the radio and remove the battery/charger.
- Do not transmit without an antenna.
- Regularly clean the charging connector with a clean, dry cloth to prevent dust accumulation from affecting charging.
7. Troubleshooting Guide
| Phenomena | Analysis | Solution |
|---|---|---|
| Cannot turn on the radio. | Battery improperly installed. Battery power run out. Poor contact due to dirty/damaged battery contacts. Low battery voltage. | Remove and reattach battery. Recharge or replace battery. Clean or replace battery contacts. Recharge or replace battery. |
| Voice weak or intermittent during receiving. | Volume level low. Antenna loose or improperly installed. | Increase volume. Turn off radio, remove and reattach antenna. |
| Speaker blocked. | Clean speaker surface. | Clean speaker surface. |
| Cannot communicate with other group members. | Frequency or signaling type inconsistent. Too far from other members. | Verify TX/RX frequency and signaling type. Move closer to other members. |
| Hear unknown voices or noise. | Interrupted by radios on same frequency. Radio in analog mode with no signaling. | Change frequency or adjust squelch level. Request dealer to set signaling for current channel. |
| Unable to hear anyone due to too much noise/hiss. | Unfavorable position (blocked by buildings/underground). External disturbance (electromagnetic interference). | Move to open area, restart radio. Stay away from interfering equipment. |
| Radio keeps transmitting. | VOX turned on or headset not installed. | Turn off VOX. Check headset connection. |
Note: If these solutions do not resolve your issues, please contact your dealer for technical support.
8. Technical Specifications
| General | |
|---|---|
| Frequency Range | 136-174MHz (TX&Rx), 220-260MHz (TX&Rx), 400-520MHz (TX&Rx) FM65-108MHZ (Rx), AM108-136MHz (Rx), Police350-390MHz (Rx) |
| Power | High Power (5W-10W) |
| Channel Spacing | 25.0KHz (Wide) / 12.5KHz (Narrow) |
| Memory Channel | 999 Groups |
| Operation Voltage | DC 7.4 V ±10% |
| Transmission current | ≤1800mA |
| Receive Sensitivity | 0.25μV (12dB SINAD) |
| Rated Audio Power Output | 1W @16 ohms |
| Receive current | ≤380mA |
| Connection for accessories | 2 pin Kenwood jack |
| Antenna impedance | 50 Ohm |
| Battery Capacity | High-Capacity |
| Material | Plastic |
| Waterproof / Water-Resistant | No |
Note: All specifications may be modified without prior notice or liability.
9. User Tips
- Programming: The radio can be programmed directly on the device or via PC using the included software and cable. CHIRP software is also a popular alternative for programming.
- Range Expectations: While marketing may suggest ranges up to 50km, the practical maximum range is typically 5-10km, depending on terrain and obstructions. Expect shorter ranges in urban or heavily obstructed environments.
- Wireless Copy Feature: The wireless copy frequency function is highly effective for quickly cloning frequencies from other radios, making it easy to set up communication with different brands.
- Water Resistance: The radio is designed to withstand rain and snow but is not submersible. Avoid prolonged exposure to water.
- Power-On Password: Be cautious with the power-on password (Menu 43). If enabled and forgotten, it can lock access to the device. It is recommended to avoid blocking the password function.
- Durability: Users report the radio feels robust and durable, though it can be a bit heavy.
- Sound Quality: The radio generally offers good sound quality and range for its class.
- Battery Life: The high-capacity battery provides extended usage, with some users reporting several days of battery life with constant use.
10. Warranty and Support
10.1 Disclaimer
The manufacturer endeavors to ensure the accuracy and completeness of this manual. However, no warranty of accuracy or reliability is given. All specifications and designs are subject to change without notice due to continuous technological development. No part of this manual may be copied, modified, translated, or distributed without prior written consent from the manufacturer. The manufacturer does not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy, or completeness of third-party products and contents involved in this manual.
10.2 Technical Support
If you encounter any problems not covered in the troubleshooting guide or require further technical assistance, please contact your authorized dealer or the manufacturer's support channels.
Print version: BF-19M_V1.1