1. Introduction
The T&G TG117 is a versatile portable Bluetooth speaker designed for an active lifestyle. It features advanced wireless audio decoding, supports various playback modes including Bluetooth, FM radio, TF card, and USB flash drive, and offers a hands-free call function. Its compact design and robust sound make it suitable for both indoor and outdoor use.
2. Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not disassemble, repair, or modify the speaker yourself. This may void the warranty and cause damage.
- Keep the speaker away from water and other liquids. This product is not waterproof.
- Use only the specified charging voltage (5V/500mA) to prevent damage to the battery and speaker.
- Keep out of reach of children.
3. Package Contents
Please check that all items are present in your package:
- TG117 Portable Bluetooth Speaker
- Portable Strap
- Charging Cable (Type-C)
- AUX Audio Cable (3.5mm)
4. Product Overview
The TG117 speaker is designed for portability and ease of use. Below are diagrams illustrating its features and controls.
Controls:
- Power Button (⏻): Long press to Power On/Off. Short press for Play/Pause (music mode) or Auto-search (FM mode) or Answer/Hang up (call mode). Double-click to Redial (call mode).
- Volume Up / Next Track (+): Short press for Next Track. Long press for Volume Up.
- Volume Down / Previous Track (-): Short press for Previous Track. Long press for Volume Down.
- Mode Button (M): Short press to switch between modes (Bluetooth, TF Card, USB, AUX, FM Radio).
Product Demonstration Video:
5. Setup
5.1 Initial Charging
Before first use, fully charge the speaker. Connect the provided Type-C charging cable to the speaker's charging port and the other end to a 5V/500mA USB power adapter (not included) or a computer's USB port. The charging indicator will show the charging status.
5.2 Power On/Off
To power on the speaker, long press the Power button (⏻) until you hear an audible prompt. To power off, long press the Power button again.
5.3 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (indicated by a flashing light or audible prompt). If not, short press the 'M' button to switch to Bluetooth mode.
- Enable Bluetooth on your mobile phone, tablet, or other Bluetooth-enabled device.
- Search for available Bluetooth devices and select "TG117" from the list.
- Once connected, you will hear a confirmation sound, and the indicator light will stop flashing.
5.4 TWS (True Wireless Stereo) Function
The TWS function allows you to pair two TG117 speakers together for a stereo sound experience.
- Ensure both TG117 speakers are powered off and not connected to any Bluetooth device.
- Power on both speakers.
- On one of the speakers, long press the 'M' button until you hear a tone, indicating it's entering TWS pairing mode.
- The two speakers will automatically search for and pair with each other. Once paired, you will hear a confirmation sound.
- Now, connect your mobile phone or other Bluetooth device to the primary speaker (the one you initiated TWS pairing on) via Bluetooth as described in section 5.3.
6. Operating Instructions
6.1 Mode Switching
Short press the 'M' button to cycle through the available modes: Bluetooth, TF Card, USB Flash Drive, AUX Input, and FM Radio.
6.2 Music Playback (Bluetooth/TF/USB)
- Play/Pause: Short press the Power button (⏻).
- Next Track: Short press the Volume Up button (+).
- Previous Track: Short press the Volume Down button (-).
- Volume Control: Long press the Volume Up button (+) to increase volume. Long press the Volume Down button (-) to decrease volume.
6.3 FM Radio
- Switch to FM Radio mode using the 'M' button.
- Short press the Power button (⏻) to initiate an automatic search for radio stations. The speaker will scan and save available stations.
- To improve reception, connect the provided 3.5mm AUX cable to the LINE IN port; it acts as an external antenna.
- Use the Volume Up (+) and Volume Down (-) buttons to navigate between saved stations.
6.4 TF Card / USB Flash Drive Playback
Insert a TF card or USB flash drive (formatted in FAT32 mode) containing MP3 audio files into the respective port. The speaker will automatically detect the storage device, switch to the correct mode, and begin playing music.
6.5 AUX Input
Connect an external audio device (e.g., computer, MP3 player) to the speaker's LINE IN port using the provided 3.5mm AUX cable. The speaker will automatically switch to AUX mode, allowing you to play audio from the connected device.
6.6 Call Function (Bluetooth Mode)
When the speaker is connected to your phone via Bluetooth:
- Answer Incoming Call: Short press the Power button (⏻).
- Hang Up Call: Short press the Power button (⏻) during a call.
- Redial Last Number: Double-click the Power button (⏻).
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Care: To prolong battery life, charge the speaker regularly, even if not used frequently. Avoid fully discharging the battery for long periods.
- Avoid Moisture: Keep the speaker dry. Moisture can damage internal components.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| No sound from speaker. | Volume too low; incorrect mode; device not connected. | Increase volume; switch to correct mode (Bluetooth, TF, USB, AUX); ensure device is connected. |
| Bluetooth connection fails. | Speaker not in pairing mode; device Bluetooth off; out of range. | Ensure speaker is in Bluetooth pairing mode; turn on device Bluetooth; move device closer to speaker (within 10m). |
| Poor FM radio reception. | Weak signal. | Connect the AUX cable to the LINE IN port; it acts as an antenna to improve signal strength. |
| TWS pairing fails. | Speakers already connected to another device. | Ensure both speakers are disconnected from all devices before attempting TWS pairing. |
| TF card/USB not playing. | Incorrect file format; card/drive not inserted correctly; unsupported format. | Ensure files are in MP3 format; reinsert card/drive; ensure card/drive is formatted in FAT32. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | T&G |
| Model | TG117 |
| Speaker Type | Portable |
| Communication | USB, Bluetooth |
| Bluetooth Version | 5.3 |
| Wireless Transmission Range | 10M |
| Audio Crossover | Two-Way |
| Number of Loudspeaker Enclosure | 2 |
| Input Power | <25 W |
| Speaker Power | 4Ω/5W * 2 |
| Frequency Response | 120HZ-20KHZ |
| SNR | ≥90db |
| Battery Capacity | 1200mAh |
| Built-in Voltage | 3.7V |
| Normal Volume Playback | 3-4 Hours |
| Charging Voltage | 5V/500mA |
| Product Dimensions (L x W x H) | 68.8 x 68.8 x 160mm |
| Weight | 334g (bare metal) |
| Cabinet Material | Plastic |
| Waterproof | No |
| Built-in Microphone | Yes |
| Support Memory Card | Yes (TF Card) |
| Display Screen | No |
| Voice Control | No |
| Intelligent Personal Assistant | None |
10. User Tips
- Sound Quality: Many users praise the sound quality for its compact size and affordable price. Expect clear and dynamic audio.
- Charging Cable: While a charging cable is typically included, some users have noted it might be missing. It's advisable to have a spare Type-C USB charging cable on hand.
- FM Reception: For the best FM radio experience, always connect the AUX cable to the LINE IN port; it significantly improves signal reception.
- Portability: The included portable strap makes it easy to carry the speaker for outdoor activities like mountain climbing, camping, or riding.
11. Warranty and Support
For any warranty claims, technical support, or product inquiries, please contact the seller or retailer from whom you purchased the TG117 Portable Bluetooth Speaker. Please refer to your purchase documentation for specific contact details and warranty terms.
A user manual in PDF format is available for download: View User Manual (PDF)
12. FCC ID Information to User
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.