CETANT PL230

Contents

CETANT Modern LED Wall Lamp User Manual

Model: PL230

1. Product Overview

The CETANT Modern LED Wall Lamp is a stylish and functional lighting solution designed for various indoor spaces such as bedrooms, living rooms, staircases, and more. It features a high-quality aluminum body, efficient LED light sources, and is available in multiple lengths. Certain models offer smart remote control and dimming capabilities.

Modern LED wall lamp in a living room setting

Figure 1: CETANT LED Wall Lamp in a living room.

Two modern LED wall lamps flanking a bed in a bedroom

Figure 2: Two CETANT LED Wall Lamps installed in a bedroom.

A modern LED wall lamp mounted horizontally above a bed

Figure 3: CETANT LED Wall Lamp mounted horizontally above a bed.

2. Safety Information & Installation Requirements

Please read all instructions carefully before installation and use. Keep this manual for future reference.

2.1. General Safety Precautions

  • Ensure the power supply is cut off or the main circuit breaker is closed before installation or maintenance.
  • Do not install the lamp in flammable or humid places.
  • Verify all parts and accessories are present and undamaged before beginning installation.
  • Installation should be performed by a qualified electrician if you are unsure.

2.2. Tools Required

  • Screwdriver
  • Hammer (if needed for rubber plugs)
  • Drill

3. Installation Procedure

Follow these steps carefully to install your LED wall lamp:

  1. Use a screwdriver to secure the lamp's mounting panel.
  2. Determine the desired mounting location, mark the spots where holes need to be drilled.
  3. Confirm the installation area and drill the marked holes.
  4. After drilling, insert the rubber plugs into the holes. Tap with a hammer if necessary to ensure a snug fit.
  5. Use a screwdriver to fix the pendant (mounting bracket) securely to the wall.
  6. Connect the live wire (L), ground wire (GND), and neutral wire (N) to the corresponding terminals on the connector. Ensure connections are secure.
  7. Cut off the power supply again and connect the lamp's cables to the main power supply, ensuring correct polarity (Live to Live, Neutral to Neutral, Ground to Ground).
  8. Tighten the screws to fix the lamp body onto the wall mount.
Installation diagram for the wall lamp

Figure 4: Visual guide for lamp installation. For a detailed PDF, refer to the official user manual PDF.

4. Operating Instructions

Once installed and connected to power, the LED wall lamp can be operated as follows:

  • Basic Operation: Turn the lamp on or off using your standard wall light switch.
  • Dimming (for Remote Control models): If you have a model with remote control, use the provided remote to adjust the light intensity (dimming) and potentially change color temperature (Cool white, Warm white, or other settings depending on the model).
  • Smart Device Integration: For models designated as 'Smart Devices', refer to the specific instructions provided with your smart home system for integration and control via apps or voice assistants.

5. Maintenance

To ensure the longevity and optimal performance of your CETANT LED Wall Lamp, follow these maintenance guidelines:

  • Cleaning: Gently wipe the lamp body with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Inspection: Periodically check the wiring and mounting for any signs of wear, looseness, or damage. If any issues are found, disconnect power and consult a qualified electrician.
  • LED Lifespan: The integrated LED light source is designed for long-term use and typically does not require replacement.
Close-up of the lamp's aluminum body, highlighting its quality and paint process

Figure 5: High-quality aluminum lamp body with high-temperature painting for corrosion and rust prevention.

Close-up of the LED light source, emphasizing uniform light output and lack of dark areas

Figure 6: Highlighted LED light source provides uniform, non-dazzling light output without dark areas.

6. Troubleshooting

If you encounter issues with your lamp, try the following steps:

  • Lamp does not turn on:
    • Check if the power supply is connected and the wall switch is in the 'ON' position.
    • Verify that the circuit breaker for the lighting circuit has not tripped.
    • Ensure all wiring connections (live, neutral, ground) are secure and correctly installed.
  • Light is flickering:
    • Ensure all electrical connections are tight.
    • If using a dimmer, ensure it is compatible with LED lighting.
  • Remote control not working:
    • Check the remote control's batteries.
    • Ensure there are no obstructions between the remote and the lamp.

If problems persist, consult a qualified electrician or contact customer support.

7. Specifications

General Specifications
Attribute Value
Brand NameCETANT
Model NumberPL230
Item TypeWall Lamps
MaterialAluminum
Body MaterialAluminum
Light SourceLED bulbs
Is Bulbs IncludedYes
Power SourceAC
Voltage110V, 220V (Operating voltage: 85V-265V)
Installation TypeWall Mounted
Installation MethodSelf-contained
Shade DirectionUp & Down
Base TypeWedge
TechnicsPlated
StyleModern Style, Minimalist Modern
UseDaily Lighting
FeaturesNo flicker, antiglare
CertificationCCC, CE, PSE, ROHS
Is DimmableYes (for specific models)
Is Smart DeviceYes (for specific models)
Hign-concerned ChemicalNone

7.1. Model-Specific Specifications

Table detailing lamp sizes, wattage, material, and recommended lighting area

Figure 7: Specifications for different lamp sizes.

Size (W*H) Chassis Power (W) Material Lighting Area
W8*H60cm25cm13WAluminum, Silicone5-10m²
W10*H80cm32cm25WAluminum, Silicone8-12m²
W13*H100cm40cm18WAluminum, Silicone10-15m²

Example: WL625 Black 60cm Model Details:

  • Color: Black
  • Material: Aluminum/Silicone
  • Recommended Space: Living Room/Bedroom
  • Size: D8*H60*chassis 25cm (Diameter 8cm, Height 60cm, Chassis 25cm)
  • Light source: LED*13W
  • Lighting area: 5-10m²
Diagram showing dimensions and specifications for the 60cm black model

Figure 8: Detailed dimensions for the 60cm model.

8. User Tips

  • For models with remote control, ensure the remote is within range and has fresh batteries for optimal dimming functionality.
  • Consider the lamp's size and wattage in relation to your room size to achieve the desired lighting effect. The specifications table provides recommended lighting areas.
  • If installing multiple lamps, ensure consistent spacing and alignment for a cohesive aesthetic.

9. Warranty and Support

The CETANT Modern LED Wall Lamp comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For further assistance, technical support, or warranty inquiries, please contact the seller or manufacturer directly.

An official user manual in PDF format is available for detailed instructions and diagrams. You can view it here.

© 2023 CETANT. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.