1. Introduction
The Lemorele TC100 13-in-1 USB-C Hub is a versatile multiport adapter designed to expand the connectivity of your USB-C enabled devices. It provides a comprehensive solution for laptops, tablets, and other USB-C devices, supporting a wide range of interfaces for enhanced productivity and convenience.
Video: Lemorele TC100 13-in-1 USB-C Hub product demonstration.
2. Package Contents
The package includes:
- 1 x Lemorele TC100 13-in-1 USB-C Hub
- 1 x User Manual (this document)

Image: The Lemorele TC100 13-in-1 USB-C Hub, highlighting its various ports and capabilities.
3. Specifications
| Feature | Description |
|---|---|
| Model Number | TC100 |
| Brand Name | Lemorele |
| Interface Type | USB Type-C |
| Standard | USB 3.0 |
| Ports | 13 |
| Certification | CE |
| Length | 25cm (cable) |
| Dimensions (Hub Body) | 170mm (L) x 43.5mm (W) x 16.5mm (H) |
| USB-C Power Input (PD) | Up to 100W Power Delivery (for charging host device) |
| USB-C Data Transfer Port | High-speed data transfer (for USB-C storage devices) |
| HDMI Ports (2) | 4K@30Hz high-definition display output |
| VGA Port (1) | Up to 1080P display output |
| USB 3.0 Ports (2) | Up to 5 Gbps data transfer rate |
| USB 2.0 Ports (2) | Up to 480 Mbps data transfer rate |
| SD/TF Card Slots | Simultaneous reading, quick data access |
| 3.5mm Audio Jack | Audio output only (for headphones/speakers) |
| RJ45 Port | 10/100/1000Mbps Gigabit Ethernet |

Image: Physical dimensions of the Lemorele TC100 USB-C Hub.
4. Setup
Before using the Lemorele TC100, ensure your host device (laptop, tablet, or smartphone) has a USB-C port that supports video output (DisplayPort Alternate Mode), data transfer, and Power Delivery (PD) functions.
- Connect the USB-C connector of the hub to the USB-C port on your host device.
- For optimal performance and to charge your host device, connect a compatible USB-C Power Delivery (PD) charger (up to 100W recommended) to the hub's USB-C PD input port.
- Connect your desired peripherals (monitors, USB drives, Ethernet cable, SD/TF cards, audio devices) to the corresponding ports on the hub.

Image: The Lemorele TC100 Multiport Adapter connected to a laptop, demonstrating its use.
Precautions
- Ensure your device's USB-C port supports audio/video output, data transfer, and PD.
- Do not use a USB-A to USB-C adapter to connect the hub to your laptop, as this may cause incomplete functionality.
- Avoid using a USB-C extension cable with the hub, as it may affect signal transmission.
- The USB-C PD port is for power input only.
- The USB-C data transfer port is for connecting USB-C storage devices only.
- Use a 100W PD charger (87W for laptop, 13W for hub).
- When connecting to a Nintendo Switch, use the original power adapter or one with 45W or higher.
- Avoid humid or high-temperature environments.
- When connecting multiple high-power devices, ensure sufficient wattage from your power adapter.
- To prolong lifespan, avoid frequent plugging/unplugging.
5. Operating Instructions
5.1. Display Output (HDMI/VGA)
The hub supports both mirror and extended display modes for Windows and macOS.
For Windows:
- Connect your external monitor(s) to the HDMI and/or VGA ports on the hub.
- Press
WIN + Pon your keyboard to open the Project menu. - Select your desired display mode: "Duplicate" (Mirror) or "Extend".
- Alternatively, go to "System Settings" > "Display Settings" to configure your displays.
For macOS:
- Connect your external monitor(s) to the HDMI and/or VGA ports on the hub.
- Go to "System Preferences" > "Displays".
- From here, you can arrange your displays and select "Mirror Displays" for mirroring or uncheck it for extended mode.

Image: Diagram showing mirror and extended display configurations for Mac OS and Windows using the hub.
Note on macOS Multi-Monitor Display: Due to macOS not supporting MST (Multi-Stream Transport), triple-screen extended display (e.g., A+B+C) is not possible. You can only achieve mirroring (A+A+A) or mirroring the same extended screen (A+B+B).
5.2. Data Transfer
- USB 3.0/2.0 Ports: Connect USB flash drives, external hard drives, keyboards, mice, and other USB peripherals.
- SD/TF Card Slots: Insert your SD or TF (MicroSD) cards into the respective slots for quick data access.
- USB-C Data Transfer Port: Connect USB-C storage devices for high-speed data transfer.

Image: Illustration of high-speed data transfer capabilities (5 Gbps) of the hub.
5.3. Network Connection (RJ45)
Connect an Ethernet cable to the RJ45 port on the hub for a stable wired network connection up to 1000Mbps.
5.4. Audio Output (3.5mm Jack)
Connect headphones or speakers to the 3.5mm audio jack for high-quality audio output. Note that this port is for audio output only and does not support microphone input.
5.5. Power Delivery (USB-C PD)
Connect your laptop's USB-C power adapter to the hub's USB-C PD port to charge your laptop while using the hub's other functions. The hub supports up to 100W power delivery.
6. Maintenance
- Keep the hub clean by wiping it with a soft, dry cloth.
- Avoid exposing the hub to liquids, moisture, or extreme temperatures.
- Do not drop or subject the hub to strong impacts.
- Store the hub in a cool, dry place when not in use.
- Avoid bending or straining the connected cables excessively.
7. Troubleshooting
7.1. Display Issues
- No display on HDMI/VGA monitor:
- Ensure your laptop's USB-C port supports audio and video output (DisplayPort Alternate Mode).
- Try disconnecting the hub, shutting down the laptop, holding the power button for 40 seconds to discharge static electricity, then reconnect.
- Cannot set higher resolution with multiple HDMI monitors:
- On Windows, maximum resolution for multiple HDMI is 1080P@60Hz. For a single HDMI, resolution depends on laptop/monitor capabilities (up to 4K@30Hz).
- On macOS, maximum resolution is 4K@30Hz.
- macOS cannot achieve triple-screen extended display: macOS does not support MST. Only mirroring (AAA) or duplicating the same extended screen (ABB) is possible.
- VGA monitor resolution/display mode: VGA supports up to 1080P@60Hz. With multiple HDMI/VGA, max resolution is 1080P@60Hz. VGA display follows the HDMI port next to it in extended mode.
- HDMI port supports other refresh rates: By default, 1080P@60Hz and 4K@30Hz. For a single HDMI, resolution depends on laptop's USB-C port and monitor's supported resolution (e.g., 2560x1440P@144Hz).
7.2. Audio Issues
- No audio output from 3.5mm jack:
- Confirm your laptop's USB-C port supports audio/video output.
- Switch laptop's audio output settings to LCD or HDMI audio output.
- Some monitors may lack audio drivers; use a monitor with HDMI audio capabilities.
- 3.5mm audio port for microphone input: The 3.5mm audio port is output-only and does not support microphone input.
- Connecting USB-C headphones: The hub's USB-C port does not support audio output. Use headphones via USB-A or 3.5mm audio port.
7.3. Connectivity & Power Issues
- Connecting a USB-C monitor: The hub's USB-C PD port is for power input only. The USB-C data port is for USB-C storage devices. Use HDMI for monitors.
- Using a USB-A adapter: Not recommended. Using a USB-A adapter to connect the hub will cause HDMI and other ports to malfunction.
- External hard drive not recognized or disconnects: External hard drives may draw more power than the laptop's USB-C port can supply. Connect a PD power adapter to the hub's USB-C PD port for stable power.
- Using a USB-C extension cable: Not recommended. It may weaken the signal and cause ports (like HDMI) to display improperly.
- No charging indication from PD power adapter: Confirm laptop's USB-C port supports PD charging and power adapter is properly connected. Try a different PD power adapter.
- Laptop indicates slow charging: The hub requires at least 13W. Use a higher wattage PD power adapter (up to 100W) to ensure sufficient power for both the hub and laptop.
- SD card not readable: Check if the SD card is inserted correctly and its file format is compatible.
- Hub intermittently disconnecting/Ethernet not recognized: Check Ethernet cable connection and for IP address conflicts. Download latest network drivers from official website.
7.4. General
- Driver installation: The hub is plug-and-play and generally does not require manual driver installation.
8. User Tips
- The 3.5mm audio jack is for audio output only; it does not support microphone input.
- For connecting external drives, especially power-hungry ones, ensure a Power Delivery (PD) charger is connected to the hub's USB-C PD port for stable operation.
- If you experience network speed limitations, ensure your Ethernet cable and network drivers are up to date.
- When using multiple power-hungry devices, a 100W PD charger is highly recommended to ensure stable power delivery to all connected devices and your host laptop.
9. Support and Warranty
For technical support or warranty inquiries, please contact Lemorele customer service:
- Email: support@lemorele.com
- Alternatively, you can contact support through your purchase platform:
- Log in to your account and go to "Your Orders."
- Select "Problem with Order" next to the relevant order.
- Send a message through "Contact Seller."
Please refer to your purchase documentation for specific warranty terms and conditions.