XCMT 980mm Clutch Cable

Contents

Motorcycle Clutch Cable User Manual

Model: 980mm Clutch Cable | Brand: XCMT

1. Product Overview

This manual provides instructions for the installation, maintenance, and safe use of the XCMT 980mm Motorcycle Clutch Cable. This product is an aftermarket replacement part designed for specific motorcycle models.

Motorcycle clutch cable installed on an engine
Image 1: XCMT Clutch Cable installed on a motorcycle engine.

The clutch cable is a critical component for smooth gear engagement and disengagement. Regular inspection and proper installation are essential for safe operation.

2. Safety & Warnings

  • Compatibility: This product is only compatible with specified motorcycle models. Installation on non-compatible vehicles may lead to improper fitment, functional failure, or safety hazards.
  • Professional Installation: Installation must be performed by a qualified motorcycle technician.
  • Torque Specifications: A torque wrench must be used during installation to ensure proper tightening. Over-torquing can strip threads, while under-torquing may cause the part to detach during riding.
  • Pre-Ride Inspection: Inspect the part before every ride. Discontinue use immediately if looseness, deformation, or cracks are detected.
  • Aftermarket Part: This is an aftermarket replacement part. Its performance may differ from original equipment. Carefully assess your intended usage scenario.
  • Modifications: Do not weld, drill, grind, or otherwise modify this product.
  • Intended Use: Some models are not E-mark certified and are intended for off-road or closed-course use only. Do not use on public roads unless explicitly labeled as "E-marked."

3. Installation Guide

Follow these steps for proper installation of the clutch cable:

  1. Prepare Motorcycle: Park the motorcycle on a level surface and engage the main stand for stability.
  2. Remove Old Component: Use appropriate tools to carefully remove the original OEM clutch cable.
  3. Position New Cable: Align the new clutch cable with the mounting holes on the motorcycle.
  4. Insert Fasteners: Insert the included fasteners into the mounting holes.
  5. Tighten Bolts: Tighten all bolts using a torque wrench to the specified torque value. Refer to your motorcycle's service manual for specific torque settings.
  6. Test Stability: After installation, manually apply pressure to the clutch lever and cable to test stability. Ensure there is no unusual noise, excessive play, or unintended movement.
Close-up of clutch cable adjusters
Image 2: Close-up view of the clutch cable adjusters.

4. Operating Instructions

Once installed, the clutch cable facilitates the operation of your motorcycle's clutch system. Ensure the clutch lever has the correct amount of free play as specified by your motorcycle manufacturer. Adjust the cable tension using the inline adjusters if necessary to achieve optimal clutch engagement and disengagement. A properly adjusted clutch cable ensures smooth gear changes and prevents premature wear of clutch components.

5. Maintenance Recommendations

  • Fastener Tightness: Check fastener tightness every 500 kilometers or once per month, whichever comes first.
  • Cleaning: Clean the cable and surrounding components with water and a neutral detergent. Avoid using strong acids or alkalis, as these may cause corrosion and damage to the materials.
  • Environmental Considerations: If the motorcycle is frequently used in off-road, muddy, or salt-spray environments, increase the frequency of inspection and cleaning to prevent premature wear and corrosion.
  • Lubrication: Periodically lubricate the cable and pivot points to ensure smooth operation and prevent friction.
Close-up of clutch cable ends with rubber boots
Image 3: Detail of the clutch cable ends with protective rubber boots.

6. Troubleshooting

If you experience issues with your clutch cable, consider the following:

  • Stiff or Sticky Operation: Check for proper lubrication. Ensure the cable is routed correctly without sharp bends or kinks. Inspect for internal corrosion or fraying.
  • Excessive Free Play or Slack: Adjust the cable tension using the inline adjusters. If adjustment is not possible, the cable may be stretched and require replacement.
  • Clutch Not Engaging/Disengaging Properly: Verify correct installation and adjustment. Inspect the cable for damage or fraying. If the issue persists, consult a qualified motorcycle technician.

For complex issues or if you are unsure about any repair, it is recommended to seek assistance from a qualified motorcycle technician.

7. Specifications

FeatureSpecification
Brand NameXCMT
Model NameKTM Honda Yamaha Kawasaki 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc
Material Type316 Stainless Steel Core, Rubber
Total Length980mm
FeaturesLow damping, bright colors
OriginMainland China
Package Dimensions (L x W x H)20cm x 14cm x 3cm
Package Weight0.127 kg
Red 980mm clutch cableBlue 980mm clutch cableYellow 980mm clutch cableGreen 980mm clutch cable
Image 4: Available colors of the 980mm clutch cable.

8. Disposal Information

When the product reaches the end of its lifespan, it should be disposed of responsibly:

  • Dispose of as metal/plastic waste through local recycling facilities.
  • Do not dispose of the product randomly in general waste.

9. User Tips

No specific user tips were available from buyer reviews or Q&A content for this product.

10. Frequently Asked Questions (FAQ)

No specific FAQ content was available from Q&A data for this product.

11. Warranty & Support

For any questions regarding this product, please contact the manufacturer, Yongkang Sanyi Trading Co., Ltd, or your point of purchase.

Disclaimer: The manufacturer and EU Authorized Representative shall not be held liable for any damage, injury, or accident resulting from:

  • Incorrect or unqualified installation.
  • Use beyond the intended scope (e.g., on public roads without E-mark certification, if applicable).
  • Unauthorized modifications to the product.
  • Failure to inspect or maintain the product as instructed in this manual.

This manual may be updated without prior notice. Please refer to the latest version for current information.

A PDF version of the user manual may be available for download: Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.